Deep drawing dies: find suitable suppliers in real time

You are looking for an innovative and reliable partner for your plastic products; without detours via an additional tool shop! Then you have found the right partner in us. We offer precision tool construction and high-quality plastic injection molding in all batch sizes from a single source. The right tool for every requirement With over 60 years of experience, a competent workforce and the most modern machinery, we design and manufacture injection molding tools, blow moulds, zinc and aluminum die casting moulds, permanent molds as well as cutting and forming tools with the highest precision. Precision in small and large series With our flexible machine park, we are able to produce small, medium and large quantities efficiently and economically in all common materials and also in special materials such as NFK natural fiber plastics. Our services for tool and mold making as well as plastic injection molding are comprehensive. As a medium-sized company with over 60 years of experience, we work on short decision-making paths with fast reaction times as well as high flexibility and adherence to schedules. Our services in tool and mold making: Advice on plastic injection technology and tool technology CAD designs of tools and/or parts Tool and Mold Making quality management Our services in plastic injection moulding: Advice on the choice of plastic and spraying technology We develop individual components and assemblies for you We offer series quality from prototypes, small and medium batch sizes to large series Die-cast zinc and aluminum Part Completion and Assemblies

Modern machinery with high speed machining centers max. Processing 5000x2500x1750 Individual parts and small series production Grinding, eroding Stamped and bent parts on presses bis.10.000kN own tool for press tools to 40 to Specialty composite tools

Model Cooperation based on trust, speed and fair prices - at these maxims is oriented the actions of fm group of companies. Particularly important are us close to our customers and their 100 percent satisfaction. Therefore, we regard it as self-evident, that is "the boss himself" in direct contact with business partners. We also make every effort to limit our delivery times to a minimum and have to be here the competition in the truest sense of the word a step ahead. The conscious use of raw materials in our production, we are not only our ecological responsibilities, but at the same time keep the prices at a low level - and steadily improved the quality of our products. As a family we also attach great importance has always been a responsible and collaborative partnership with our employees.This includes moderation in growth to secure jobs as well as the development of individual skills. Production Continuous monitoring and the use of our strict quality management give us and you the necessary security. The products are tested and receive the GS mark. fm office furniture are characterized by their high quality and their particularly good value for money. At our office furniture and office furniture we offer a 5 year warranty. For the production of our office furniture, we use only high quality wood-based panels E1 grade. The processing is done on modern CNC-controlled production facilities. fm offers from consulting and planning through production to delivery and installation of a holistic system. Power spectrum * Complex technically sophisticated products * From prototyping to mass production * Economic Planning and Production * Low tooling costs * Flexibility * High tech 3D Constructions * CAD / CAM * Tool - Model * 5-axis milling * Expertise * Size One * Ability to cooperate * On-time delivery

Production of drawing parts mainly with machining processes

Converter of adhesives tapes (3M platinium converter) We can produce parts using: - roting machine - laser ploter - knife ploter - laminator - press

The company Intec MKD brings together its long tradition in the industry production of mechanic parts and systems with the up-to-date European practice, particularly in the field of this producing processes. In the last decade, our high professional and motivated employees as well as the modern equipment have made out of our company a well-known producer of mechanic parts and systems, which are able to meet needs of several European companies, particularly for telecommunications, control systems, computers, medical and other electronic and electro technology. We set ourselves an simple goal: to unconditionally satisfy the needs of our customers, relating to quality, reliability in terms of delivery and logistic support. We offer CNC punching machines and bending machines, laser cutting, classical stamping machine, welding processes and further mechanical operations and surface finishing. Beside our technical qualifications we are able to get in touch with our customers, speaking all major European languages in order to ease communications with our potential buyers. CNC Punching The modern Trumpf punching machines guarantee a precise and effective punching and other mechanical forming (tread cutting, crimping and forming...). We work 1500x3000 mm sheet metals, with a maximum of 4 mm thickness for cold rolling materials, 2 mm for stainless steel materials and 6 mm for aluminum CNC Bending Modern bending technology guarantees precise measures and repeatable execution of documentation requirements. Welding and grinding We execute all types of welding, as for example MIG, MAG and TIG as well as spot welding. Our grinding division guarantees precise measures and a high aesthetic finishing of final products. Inserting Automatic and manual insertion machines allow us to insert of all types of inserts. Toolshop In our toolshop we produce all types of tools for metal processing for our own needs and on requirement. Powder coating In our lacquering plant we execute line lacquering as well as in manual booths. Zinc galvanic plating A modern automatic producing line allows executing all types of zinc covers. Sheet metal parts producing company mostly for automotive, electronic in maschine constructign industry. Modern CNC equipment ( Trumpf punching, Bemding, PEM serters, stamping presses, toopshop) International personal (operating languages: German, English) ISO certificated since 1994

For more than 40 years we have been engaged in the design, industrialization and molding of technical articles in both metal and plastic; today Segato is specialized in the construction of structures for desks and complements for office furniture with an elegant and innovative design. Customer involvement is very important for finding targeted solutions and responding at best to his needs. The design is carried out within the company, also in collaboration with designer, architects or technicians. We make use of innovative technologies and cutting-edge equipment, we use quality materials to guarantee a valid and solid product, able to persist for a long time. In the company there are highly trained collaborators, able to respond quickly and precisely to various requests. the care of details, attention to functionality and design are an integral part of our mission which is focused on proposing entirely MADE IN ITALY solutions.

We provide complete solutions of systems and devices (with and without structures), tools (sheet metal stamping) and test gauges and special machines of all kinds On our Tebis 2.5 and 3D programming courses, we can create all the editing programs. 2.5 and 3D machining also be run as subcontracting. The mechanical and spatial possibilities for the manufacture and assembly have since been expanded as the know-how. Further, huge investments of new production halls, crane systems, large CNC - controlled milling machines and Horizontalbohrwerken paved the path challenging as an interesting partner to the automotive industry, the press industry and the aerospace technology. Everything from a hand- Hydraulics, pneumatics and electronics round out our catalog of manufacturing options.

Uniqueness in tool and mold making The industrial value chain determines our actions. Tool and mold making, we understand the link between development and production. The central task of the tool and die making industry is to meet the complex and multi-dimensional needs of our customers. With our expertise, we are always close. We work with the latest machines and the corresponding measurement technology. High demands on the quality of tools and forms requires special measuring tasks. If you ask us, "What are you different?" we answer: "Personal communication with the responsible engineers, more engineering in the early stages, experienced and capable employees and a well-coordinated team and - if it is even in a hurry, we achieve the extraordinary.."

Kiefer GmbH has been producing stamped and bent parts as well as welded constructions of the highest quality for more than 35 years. Our components are used by well-known customers in the automotive, building hardware, sanitary, household appliance and solar industries. With a constant focus on efficiency in all production steps, we are able to deliver the highest quality standards at unbeatable prices. We work steel, stainless steel, light and non-ferrous metals as well as plastics up to 15 mm thickness on modern and efficient machines. Our in-house tool shop allows us to quickly and professionally realize even short-term orders. Technical Equipment: - 2 punching machines - 35 eccentric and hydraulic presses with up to 400t pressure capacity - 4 multi-spindle drilling machines - Thread cutting machines - 8 welding workstations (MIG, MAG, TIG and resistance welding) - 2 welding robot systems - 2 high performance metal sawing machines - Own toolmaking

We are a family-run company based in Neuenrade and have over 5 decades of experience in toolmaking. Back then, purely specialized in eroding, we now have a machine park that extends over CNC milling machines with 5-axes, countersinking and wire eroding machines. We manufacture your components in 3D with the Mastercam and Mecanic programs. Our portfolio includes progressive tools (punching, bending, deep drawing), fixture construction, prototype tools, standard parts, etc. We would be happy to support you with our know-how from the idea to implementation, as well as the ongoing production and maintenance of your tool. We always remain your contact! Our team consists of experienced and young dynamic employees. We are characterized by flexibility, high precision and accuracy. We also attach great importance to close communication with our customers in order to avoid problems and reduce downtimes. Often your own capacities are not sufficient for complex tools or individual components, we are happy to step in for you at short notice. Just talk to us!

Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

The Company The experience of over 80 years and the high quality standard of our products make us an efficient supplier for a variety of areas. We are certified to DIN-EN-ISO 9000. Through our new building in 1989 optimum working conditions for 50 staff members were created. The large production areas provide appropriate space for the operation of the machines and in-house transport. The company building sets architectural standards in the industrial area of Rechberghausen. An ingenious roof structure with a shed glazing ensures uniform illumination. Embedded in the Sheds is an extremely effective heating and ventilation system. Production Our stampings are used in many industries a byword for quality and reliability. Today w8ir produce modern stamping machine series parts mainly for the automotive industry, textile machinery, electrical and precision engineering, as well as for the household appliance industry. Of course, part of a successful operation more than a good production. Thoughtful planning and technical know-how form the foundation of our company. Toolmaking The tooling in our company is of particular importance. With modern machinery and skilled toolmakers, we can react quickly to customer demands and changes. An optimal tool design, ongoing monitoring tool - repair and release testing before the trial started, the conditions for optimal fulfillment of customer receivables. Large-scale production The production chipless forming (stamping) is the focus of our company. SEITZ stampings are used in many industries a byword for quality and reliability. Today, we produce advanced punching machines series parts mainly for the automotive industry, the machine tool and textile machinery, electrical and precision engineering as well as for the household appliance industry. Our machinery includes today ... Punching machines of 630-2000 KN Eccentric of 250-1600 KN Hydraulic presses of 50-2000 CN Small and medium batch production A majority of our customers needs medium batch sizes. In order to manufacture these products economically and flexibly, we manufacture these parts in various stages of operation on universal tools. This tool costs are reduced to a minimum. Difficult drawn parts are manufactured in several operations on single-cavity molds. At Hydraulic Presses Plate Pendant different kinds are marked. Universal bending Dancing allow folding in almost all degrees. Quality assurance Building on the insight that only makes a consistent quality of our products long term existence in the market possible, we have in our home a quality assurance system according to DIN-EN-ISO 9000 and the guidelines VDA 6 of the automotive industry established. Components of our QA system are: Modern quality control methods such as: analysis potentioneller errors and consequences (FMEA), Statistical Process Control (SPC), capability studies, resources monitoring ... Qualified employees, and the implementation of knowledge from the teaching quality, guarantee a consistent quality to our customers. Already during the manufacturing process ensures the quality of the products with the help of self test and SPC. From the Department QS implementation of these measures will be monitored and documented. The static analysis provides decision support for further quality assurance measures.

Toolmaking sheet metal packaging Mechanical Production

We provide cost effective materials to meet with the Automotive Sectors’ continual search for light weight, robust and technically demanding sealing technology. Our family business specialise in producing tailor-made solutions to meet individual customers needs in areas such as sealing, bonding, cushioning and noise reduction. Our product range includes adhesive backed and non-adhesive foams, tapes, rubber, felts and fibres, filtration media and much more. We aid and assist in the development and design for custom-made components to your dimensional and technical requirements for use in interior and exterior seals, gaskets and trims. RGH work alongside 3M to provide VHB tapes converted into gaskets such as bonding tread plates, clips, sensors and other plastic components. RGH work closely with 3M in order to recommend the ideal adhesive to suit your application so whether you are bonding plastics, metals, glass or fabrics RGH will be able to advise the perfect bonding solution. A small range of examples of applications include NVH and sealing for Lights, Mirrors, Steering Systems, Instrument Panels, Heating and Ventilation, Air Conditioning Units and Door Closures and any areas that require sealing to prevent air, dust, water and oil ingress. RGH has over 35 years experience of designing and manufacturing a vast range of seals and gaskets used in industrial and commercial applications. We understand the complex design, material and performance requirements for effective sealing of gases, oils, chemicals, heat, water and steam and develop and manufacture high quality solutions to suit. Seals and gaskets can be manufactured to high tolerances in specific shapes in a huge range of materials including rubber, plastic composites and foam. RGH design and manufacture components from an extensive product range in order to create the perfect solution for your application, first time. MATERIAL SLITTING - Continuous rolls or individual sheets - Twin loop splitting machines - Automated slitting process - Precise thickness tolerance control - Customer specific capabilities ADHESIVE LAMINATING - Adhesive lamination to substrate - Single or double sided - Finger Lift / Tabbed liner capabilities - Single process lamination and slitting DIE-CUT & STAMPING - Digitally Controlled Tooling System - CNC controlled die-cut process - Die-cut individually or kiss cut on a roll - Maximum utilisation of material - Waste material removal FABRICATION & ASSEMBLY - Sub assembly - Customer specific fabrication - Bi or Multi substrate lamination

Magnetic Media Mechanics Ltd. was founded on the 9th of October 2000, as an independent company on the territory of former big factory “Magnetic Media” Co." It is situated near the motorway, in Dragor, municipality of Pazardzhik. The company is 108 km away from Sofia and 35 km away from Plovdiv. MM Mechanics Ltd. is situated on 8 000 square meters all-out area and has its own buildings, machines and equipment. The company is specialized in mechanical processing of aluminum and steel parts, production of varied tools for flooring, all kinds of galvanic coatings and powder coatings. MM Mechanics Ltd. also produces different kinds of assemblies, as well as non-standard machines for varied processing and current repairs. MM Group - Production of tooling – press forms, molding forms , punching tools, tools for forging - Aluminum die casting under pressure – with machines from 200t to 650 t. - Alloying of aluminum and zinc alloys - All Types of machining - Galvanic coatings – bright and chemical, manganese and zinc coating, chromium plating, - Molding of plastic parts - All types of heat treatment, cementation - Powder and liquid spray coating - Manufacturing of joint bolts, tips and rods for cars - Production of tools for floor covering - Assembling line of meetings and products - Milling and turning (CNC machines) - Stamping, Deep drawing, Forging - Grinding, Heat Treatment, Welding

Manufacturing of mechanical components for automotive,agricultural machinery and hydraulic industries.

We are making stamping dies and milling and wedm parts.

Our company offers precision engineering and more from one source. On a modern, computer-aided machine tools we mill prototypes, individual parts and series parts. Using the latest machining centers we work with high precision milled parts up to 5 pages in one setting. This complex machined parts can be manufactured economically. The NC programs are prepared for programming on workstations. We can easily your drawing dxf data in formats dwg, step, igs, vda, sat assume. Materials and work area We process the materials of aluminum, iron, cast iron, steel, titanium, brass and plastic The maximum working range of our machines is 500x500x400 mm Program of delivery Ready for renowned customers from different industries and we edit: Bearing, housing, plates, linear units, assembly units, handling units, grippers, guides, levers, bars, distances, angles, baking, clasps, frames, covers, holders, body, castings, profiles Assemblies Complete assemblies and devices are manufactured by us ready for installation including the given surface treatment and fitted.Our own tool enables the production of stamped and bent parts
in small and medium-sized batches. Through our wide range of possibilities for cutting and non-cutting processing results in a wide range of activities. Our services are completed by: Surface treatments such as Trowalieren, polishing, grinding and sandblasting Surface coatings such as anodizing, chromating, burnishing, nickel plating, etc. Heat treatment processes such as carburizing, nitriding, inductive hardening. Proven Quality All products are subject to during production and before delivery to continuous quality control by our qualified staff to meet our demand for a zero-defect production.

Moravia Stamping is one of the biggest metal sheet stamping producers in Europe.We are able to offer wide range of producing technologies. Except of stamping, our technologies included also (spot) welding, clinching, tumbling, milling, threading or drilling. In terms of surface treatment we proceed oiling, ultrasonic cleaning, zinc phosphating or cataphoresis coating. We are able to manufacture black steel, aluminium and stainless steel. Our company can also offer and produce the tool needed for stamping. We have skilled construction team and wide CNC machined park to full fill tasks like this.