Manufacture of stamping, drawing, deep drawing and stamping bending parts, assemblies, welded assemblies, plastic covered parts, stampings and plastic tools, special machine

Your partner in mechanical subcontracting We offer a subcontracting service for mechanical components and assembled machines, in which, starting from the customer's project, we study its industrialization, we identify the most suitable production process, we rely on the most suitable suppliers for each individual production phase.

Based in Normandy, we are experts in stainless steel manufacturing, from cutlery to deep-drawn components featuring invisible laser welding. Our production capabilities include an in-house continuous vacuum annealing furnace, along with high-capacity, fully automated lines for deep drawing, welding, and polishing.

Bade und Rinscheid is a specialist for metal processing of aluminium, steel, stainless and high-strength steel and other standard materials (Cu, Ms) Toolmaking, stamping production including surface treatment and global just-in-time delivery for your provision of Sheet metal technology for automotive control systems Heatsinks EMV shielding High tensile stainless spring steel parts Housing components and assemblies for standard- and special plugs Precision bending and deep-drawn parts for assemblies for rubber-metal or plastic-metal combining techniques Reinforcements as an inner part for vibration damper/absorber e.g. Sleeves and drawn parts for chassis frame components Axle spring plates for pivoted bogie of railway vehicles Stamped and bended parts and assemblies Brackets for automotive sensors and functional assemblies Handholds and edge protection for wooden boxes according to DIN and TLA 004 Special fittings BADE UND RINSCHEID processes coil and strip steel from 0,2 up to 8 mm thickness. Especially for the use of aluminium – but not only – the machinery and equipment have optimized functionalities. Automated stamping machines, hydraulic and eccentric presses with forces up to 3.150 MPa process coils up to a width of 600 mm. Small tolerances, high demands with regard to planeness e.g. and other sophisticated specifications are covered and as far as possible already checked during production in line. Our industrial cleaning devices – built in accordance to environmental demands make use of fluids that are CHC free. The possibilities are given for the use of degreasing processes according to VDA 19 or DIN ISO 16232 e.g.. The considerable and responsible run of processes leads to products with high quality standards. Our lean organisation assures short lead times in production and a serious focus on customer demands.

We ensure local product support at technical and commercial levels for a group of part suppliers in Asia, Europe and the USA.We provide the following components to companies in Europe: - Castings in grey iron, nodular iron, steel, rough & finish-machined - Diecastings in aluminium and zinc alloys - Permanent mould (gravity) castings - Forgings - Stampings We can take care of all of the details involved in getting the components made for you and shipped to a location of your choice. To start, we require a part drawing, an indication of quanties needed and point of delivery. You will receive a quotation rapidly.

We are pleased to introduce Next Level Robotics - your expert partner for advanced metalworking. With two decades of industry experience and a team of highly qualified specialists, we are the first port of call for precise and reliable manufacturing services. Our comprehensive service portfolio in the field of CNC solutions covers the entire range of state-of-the-art machining technologies: - CNC machining centres: from versatile 3-axis machines to high-precision 4- and 5-axis vertical machining centres that realise even the most complex geometries with maximum accuracy. - Specialised machining: Precision lathes and milling machines, wire erosion (electrical discharge machining) for the finest cuts, horizontal boring machines and specialised Swiss screw machines for demanding small parts. - Sheet metal processing: State-of-the-art laser cutting machines as well as bending and folding presses for flexible and precise sheet metal processing. We also offer you a comprehensive service package that goes beyond pure machining: - Welding: professional welding solutions for robust connections. - Heat treatment: Optimisation of material properties for maximum performance and durability. - Coating & painting: High-quality surface finishes that combine protection and aesthetics. We attach great importance to offering you not only excellent quality standards, but also attractive conditions and comprehensive availability.

Visit our website

"Kupro Email" LTD is a traditional and long-standing manufacturer of enameled household dishes and construction brackets. In addition to those, the company also produces fireplaces for heating on solid fuel and the necessary accessories for their operation - enameled pipes for stoves, heat exchangers (pounds), underlays for fireplaces.

Since 1971, convince the achievements of our house in a highly competitive market of the tooling and prototype construction. Uncompromising quality, the profound Knowledge and commitment of our staff, and the latest production technology shape our corporate philosophy. To design innovative and professional product solutions and produce, is our daily challenge that we perceive competently and with great joy.

Industrial Engineering: Realization of sheet metal parts and mechanical function ASSEMBLY Design office and sheet metal mechanics

25 years of quality and service for our customers With profound expertise and many years of industry experience in the production of functional prototypes, we provide individual support to our customers. Getting started is crucial. IGW's work starts where ideas become top quality: in the development and production of prototypes and small series. As a manufacturer, we quickly and precisely translate the requirements of the engine and automotive industries into testable individual components and assemblies. Our DEKRA certified management system ensures compliance with the highest quality requirements at all times.

GMR Endüstri Teknik is a foreign trade company, which is supplying custom made drawing parts and industrial products from Turkish Industry according to variable customer demands. GMR located in Bursa, Turkey where is the heart of Turkish manufacturing industry. We are focused especially on custom made parts for European automotive manufacturers and their suppliers. We are supplying precision turned&milled parts, cold&hot forged parts, special connecting elements, sheet-metal parts, laser&stamped parts, welded components, aluminium injected parts and cast-iron parts for automotive and various industries. The range of products that can be supplied by GMR with ease of access to powerful factories located in the surrounding provinces are quite large. Apart from semi-finished and finished products, various raw materials like aluminium sheets and profiles, cold&hot rolled pipes, acrylic sheets, aluminium foils, special packaging goods and all kind of industrial demands can also be supplied by GMR with required certificates and test reports.

Your certified partner for CNC sheet metal processing, milling, turning Since 1990, Eckert-Fertigungstechnik has been offering you the highest quality in an exceptionally wide range of production areas. Whether in machining, sheet metal processing or surface technology, we offer you a wide range of metalworking manufacturing options. Quality and on-time delivery are our highest credo. We produce complete components for you, from design to fully welded and/or assembled assembly. Our flexibility is reflected primarily in our short turnaround times. Your satisfaction is our highest priority!

The TAWESCO is leading producer of tools, metals stampings, weldments mainly for the automotive industry but also trucks, agriculture and forestry machinery, mostly heavy weldments including surface treatment and welding fixtures. Key figures: • All in one solution under one roof (DESIGN – TOOLING – STAMPING – WELDING) • Turnover about 78 mil. EUR in 2019 • 950 employees • Production area about 50 000 sqm in Koprivnice near Ostrava city • Tradition since 1850 as TATRA Trucks production • Quality management: EN ISO 9001:2015, IATF 16949:2016, VDA 6.4., ISO 14001:2015, ISO 3834-2 • CAD-CAM Capaility: AutoCad, Catia V5, Autodesk Inventor, IDEAS, AutoForm Tawesco competitive advantage: "All under one roof ": stamping + welding + tooling + design Stamping: • Metal and aluminium stampings for automotive industry up to 50 kg • Mechanical, eccentric, progressive and transfer presses up to 2000 kg • Press breaks up to 8 m Welding: • Weldments for automotive - spot and laser welding • Heavy weldments for trucks, agriculture, forestry and municipal machines • Robot, automatic, semi-automatic and manual welding • 2D/3D laser cutting Tooling and design: • Welding and machining jigs up to 15 m • Tools for forming, bending and perforation of steel sheets up to 50 T • Milling centres, drilling and grinding machines • Try-out hydraulic presses 1250 T and 2500 T Quality management: EN ISO 9001, IATF 16949, VDA 6.4., ISO 14001, ISO 3834-2. References: 1. John Deere, Kemper, CLAAS, KION- Linde Material Handling, Fenwick 2. TATRA Trucks, IVECO 3. SKODA Auto, Audi, VW, Bentley, Daimler 4. GESTAMP, SNOP, TIBERINA

The Knupfer Metal Processing GmbH is a sheet-processing supplier for the machinery and special machinery for air conditioning, ventilation and suction technology, clean room technology and the automotive industry and has worked for over 50 years. We manufacture sheet metal parts, machine covers, protective covers, enclosures, machine bases, machine body and complete assemblies from lot size 1 steel, stainless steel and aluminum. Our high-tech production in-house include: Laser Cutting (Automated high-bay warehouse) The following material can be cut: steel up to 25.0 mm, stainless steel up to 20.0 mm (oxide-free), aluminum up to 12.0 mm material thickness. The max. Machining size is 3000 mm x 1500 mm. All three stocking systems are connected to an automatic high bay warehouse with 220 storage bins (3 tonnes storage capacity). We are thus able to cut during the night shift without staff. Water jet cutting 5-axis machining of steel up to approx80 mm, stainless steel up to 80 mm, aluminum up to 100 mm - other materials such foam, plexiglass, plastics, glass, stone, sealing material, composite materials, wood, etc. possible. The max. Machining size is 3600 mm x 2000 mm Bending Pressing force of the CNC press brakes: 1 x 320t, 200t x 1, 1 x 36t ACB angle sensor available, 3-point bending is included as standard, Folding Machine in use Nibbling and punching Steel up to 6.0 mm, stainless steel up to 4.0 mm, aluminum up to 6.0 mm The installation of ventilation gills, beading, perforated grids, rows etc. is easily possible Welding (Manually or with robots) MIG / MAG and TIG, spot and stud welding (threaded bolts and sleeves), welding robot with rotating and tilting table for components up to 5000kg unit weight. These saws, laps, mech. Machining (milling, turning, drilling, threading), production of flange rings according to DIN 24154 and angle rings to DIN 24155, as well as special rings and segments and paint the assembly and completion according to the surface treatment (powder coating, galvanizing...).

* Construction Requirements * Sheet Metal Working * CNC drilling * Milling * Metalworking * Metals and Alloys * Metal products * NC CNC sheet metal processing * Welding * Welding process * Punching * Forming

LTi-Metal Technology GmbH is a contract manufacturer and specializes in the development, manufacture and assembly of complex sheet metal parts and systems. We can offer the whole production depth in sheet metal processing of punching, laser cutting, bending, edging, clinching, welding, laser welding, assembly including powder coating. Our design office with a total of 24 employees, will be happy to ministering in the implementation of their ideas. Logistics services are moved at any time at our new plant in Windischbuch, here we hold for you 8,000 sqm of storage space before.

Since 1996 Arcoplast is as a processor of technically high-quality plastics is a reliable partner for industry. With the help of modern machinery, we produce finished parts from drawings or samples, sliding and guiding elements, protection and bumper guards, rotating parts, sheets, panels and round bars made of the following materials: PE 500, PE 1000, PE 1000 DSL, PE 1000 CP, PE 1000 BOR, PE 1000 HT, PE 1000 RB, PA 6, PA 6 + MOS2, PA 6.6, PA 6G, PA 6G + MOS2, PA 6G + oil, PA 6 fiber, PA 12, POM-C, PP (about) PET, PVDF and PTFE (round).

Who we are Founded in 1904 as a small company, we have developed into a powerful medium-sized companies in the metalworking industry. Business far beyond the borders of Germany, Denmark, Sweden, Austria and continue to talk of the reputation of our company. What we offer We offer a wide range of stove and fireplace accessories and household goods of all kinds We also offer Punching up to a force of 125t, gas metal arc welding, spot welding, powder coating and the production of 2 or 3-dimensional wire bending parts as services in our company. Our goals Satisfied customers, as well as flexibility in our product range are self-evident for us. Accurate delivery date and a consistently high quality of our products are a must in our company. We hope to have piqued your interest and look forward to a good cooperation.