We are a small master company in the field of mechanical engineering, specialized in the production of turned parts and 3D printing. In addition to the production of individual parts and small series, our strengths also include the creation of 3D files, plans and the retrofitting of parts.

As a small and highly flexible company, we have specialized in the classic fittings from metal. Our product range include: Window shutter fittings window accessories Door and gate fittings fish tapes construction bands box fittings Decades of experience, sophisticated and proven solutions, continuous product enhancements and intensive customer care by our field service characterize the company Pfeifer fittings. The specialized trade is our traditional partner. Only through service and professional advice quality can be made aware. Plant and pipeline construction We offer uncompromising quality in plant and pipeline. We offer expertise and abundant experience for the processing of stainless steel and steel the production of containers and pressure vessels, such as breweries, dairies and industrial Pipeline construction and industrial assembly We assemble, provide installation teams and supply components.Similarly, we are by our modern and comprehensive machinery able to provide complete solutions. Here punctuality and precision are guaranteed. Steel and metal We plan, design and manufacture custom-made for everyone: stairs balconies canopies carports Light and heavy steel structures and platforms For your construction projects, we create the right solution. As your partner for difficult building projects we are at the planning stage to the side and find the 100% solution in terms of quality, cost and design. Mechanical Production Take advantage of our expertise and our extensive range of equipment. According to your specifications we manufacture single and serial parts. Our experienced staff is well versed in the areas of turn mill welding mount From the manufacture of individual parts to the complete equipment, our comprehensive performance and flexibility to tough competitive prices and with the highest quality available. sheet metal working In the field of sheet metal processing, we offer the following services: lasers Flame cutting roll Edges up to 5 meters welding With our machinery and a professional staff we are going in the usual flexibility to your wishes and requirements. Through our well-stocked raw material warehouse, we are able to produce within a short time and deliver. surface treatment The surface treatment of steel and steel parts has been one of our service offer.We take care of the following operations: Glass bead blasting Coating according to RAL colors electroplating Feuerverzinken cataphoretic coating sandblasting Dipping and spraying surface treatment The surface treatment of steel and steel parts has been one of our service offer. We take care of the following operations: Glass bead blasting Coating according to RAL colors electroplating Feuerverzinken cataphoretic coating sandblasting Dipping and sprayingWe take care of the following operations: Glass bead blasting Coating according to RAL colors electroplating Feuerverzinken cataphoretic coating sandblasting Dipping and spraying surface treatment The surface treatment of steel and steel parts has been one of our service offer. We take care of the following operations: Glass bead blasting Coating according to RAL colors electroplating Feuerverzinken cataphoretic coating sandblasting Dipping and spraying

We are an innovative and powerful companies in the metalworking industry, which successfully presented by flexibility, high quality and manufacturing standards for several years on the market. With an efficient and equipped with CNC technology, modern machinery, we manufacture items, sample parts, small and medium series in all standard and special materials. With over 35 years of experience in mechanical engineering and metal working, we are now even to realize highly complex manufacturing tasks is able to provide our customers requirements to meet.

We are a small machine construction company, which has the complete machine and plant incl. Planning, design, manufacturing incl. Controller operates. In addition to our special machines Haubtbereich is the packaging and conveying We also manufacture parts and serial parts to customer as turned parts, milled parts, drilling parts, welded parts, or combinations thereof with metal processing, also we manufacture welded constructions complete with surface finish in our home Your contact person: Michael Schäfer Tel 0049 06641 9120690 or by email: smt-maschinen@t-online.de Translation by Google Translate

The Nowack Company was founded in 1932. In its early years, the firm specialised in the manufacture, processing and printing of natural corks. With the increasing use of plastic in the beverage sector in the 1950s, the company put its first injection moulding machines into operation. As markets continued to grow and become more demanding, the firm made parallel endeavours to widen its range of plastic articles and expand into other sectors. The move to the Lohne Industrial Park in 1972 proved to be decisive, as it offered the company the space that it required to continue to develop and grow. Various expansions in the production area throughout the 1980s and 90s allowed the company to move into further sectors, such as toolmaking, serigraphy and dabber printing. The year 2003 was marked by the construction of the new administration building and the addition of a further 1000 square metres of production floorspace. As you can see – Nowack is a firm that gets things done. And it intends to remain that way. We fully intend, now that the company is being run by a third generation of managers, to carry on doing everything within our power to have a positive influence on cooperation with our customers both old and new. Our sense of commitment is what makes us your reliable, quality-conscious, full-service provider in the field of plastics technology.

Innovative and reliable service from the Hannover region for product development, Rapid prototyping, laser sintering, small batch production and CNC machining further information about MFD - Kunststofftech GmbH: https://www.mfd-gmbh.de/ Since its founding in 2003 MFD can look back on a steady growth. Today the production development is adjacent to the laser sintering, rapid prototyping and contract manufacturing of prototype parts and small series, the service portfolio. In the district of Hanover, you have a team of designers, product developers, sample and prototype builders and precision engineering and metal cutting available. Thus MFD has in each production area with a high level of expertise and due to the high level of vertical integration, even time-consuming and complex tasks to offer cost-effective. Whether. As rapid prototyping service provider for 3D printing and laser sintering components, as small batch manufacturer for plastic components, or as a system provider for product development, prototyping and serializationMFD finds a solution for every requirement. Through a detailed order planning and specialization in prototypes and small series short delivery times can always be offered, in Rapid Prototyping and prototype delivery times are sometimes a few working days realized. . MFD supports its customers from the idea of a plastic article through the prototype to small series production of several thousand components as competent partner and would be as an innovative company on new tasks.

We are experts in developing and constructing complex machines and systems. This also brings many advantages in contract manufacturing. Thanks to our large CNC machines and our manufacturing know-how, we offer our customers first-class metal processing according to individual specifications. The production documents and dimensional drawings are provided by our customers or designed in our own design office.

CNC manufacturing technology = expertise from experience Years of experience and a professional approach that draws CNC manufacturing technology from. Convince yourself of our in-depth knowledge and personalized service! Our advantages: • collision-tested NC programs •Reliable • Customer focused • Cost

About us We, the Rex Industrie-Produkte Graf von Rex GmbH is a medium-sized company with about 75 employees. The company is based in Vellberg in the Hohenlohe region between Schwäbisch Hall, Crailsheim and Ellwangen. We have specialized in niche applications: Technical textiles for heat protection and insulation Insulation products of inorganic / organic fibrous raw materials for fire, heat, cold and sound insulation Fire protection products for building construction Friction and sliding materials (REX 2000) for industrial applications Moldings in vacuum forming Metalworking for mechanical engineering and special engineering Our products are customized and application specifically designed depending on the problem. They are characterized by excellent technical characteristics and consistently high quality. They are quick, handle clean and safe. Our main areas of application are mechanical engineering, shipbuilding, railway, power plants, military and industrial standard and special solutions. The introduced and practiced quality management system is certified according to DIN ISO 9001:2008. Furthermore, the quality management system for certain products, correspond to Module D (production quality assurance) of Directive 96/98/EC on marine equipment and is regularly reviewed and certified by the See-BG.

In 1948 Moritz Kurt Juchheim founded the company M. K. Juchheim GmbH in Fulda, and started the production of high-quality glass and glass contact thermometers. The trade name JUMO is derived from the name of the founder (Juchheim, Moritz). The product spectrum was gradually expanded after 1950. In 1985 Bernhard Juchheim, son of the founder, took over general management. The mother company was renamed as JUMO GmbH & Co. KG in June 2003, to match the naming of the international subsidiaries. At the same time, Michael Juchheimwas appointed as C.E.O. with power of sole representation, as was his father, Bernhard. Now in the third generation of activity as a family-owned enterprise, JUMO has a staff of more than 2,200 employees throughout the group. It is very well established, with 5 subsidiaries in Germany, 24 foreign subsidiaries, and more than 40 agencies around the world. Today, the extensive product spectrum from JUMO covers components and system solutions for the measurement, control, recording and analysis of physical and chemical parameters. The products range from sensors for temperature, pressure and analytical measurement to the control and recording of measurement data. These instruments and systems are used in a very wide variety of sectors in the capital goods industries. The support of the two prefabrication divisions for metalworking and electronic modules provides the company with a fast, flexible response. And customers can acquire everything from a single source – from simple system modules to complex process software. JUMO does not restrict itself to offering standard items from large-scale production, but is always oriented to the needs and specifications of its customers. The company’s development department and the expertise of its employees facilitate individual customer solutions that meet the highest requirements for functionality, precision and easy-to-use operation. A global service network, consisting of 13 independent sites abroad with additional external service partners, ensures that JUMO is always close to the customer.

CZIOTEC - "Precision for better Quality" The CZIOTEC GmbH is a company with more than 100 employees. We are a recognized training company with about 20 training places. In diverse occupational groups we enable a successful entry into the professional life. We have been certified since 1997 according to DIN ISO 9001 and since 2012 welding to EN 1090-2. Our strength is the high level of vertical integration. We accompany the customer from the initial idea for a product to series production and beyond.

The Weber metal technology is a nationwide operating company. With competent and enthusiastic staff we'll do a variety of tasks for our customers as a supplier in the field of laser material processing.

Welcome to Csúri Elektronics, your trusted partner for precision CNC milling services. Our state of the art CNC machine delivers first-class results for various industries and applications. Whether you need custom prototypes, high-precision parts, or artistic designs, we bring your ideas to life with unparalleled accuracy and reliability. At Csúri Elektronics, we proudly offer advanced CNC milling options with a generous working area of 1000mm x 1000mm x 300mm. This large volume of work allows us to handle a wide range of projects, from complex designs to large-scale components. Whether you're working with complex geometries or large parts, the precision and flexibility of our machine guarantee flawless results, every time. From small prototypes to mass production, Csúri Elektronics is equipped for all your milling needs with exceptional accuracy.

Köster CNC-Technik is an up-and-coming company specializing in production of drawer inserts, workpiece clamping devices and commissioned work for industry and trade. The company offers a large number Standard types as well as special solutions according to customer requests. High-tech in rural Wagenfeld Mechanical engineering technician Tobias Köster is the owner of the Köster CNC technology company. With his new Mazak He has been producing the CV5-500 in his workshop since 2021. In the middle of a rural idyll become complex Components manufactured on the highly efficient CV5-500.

Specializing. . . we are the manufacture of ready-to parts and complete assemblies from 3 pieces upwards. No matter whether it is for chromium-nickel steels (stainless-steel), heat-resistant steels, special steels and other materials, nickel alloys such as Hastelloy, iron and steel castings, hardened steels or Aluminum alloys, copper and other nonferrous metals are. Quality assurance. . . is the measure of all things for us. But here it is not at the end of the production process, but is provided by the first stroke of the pen planning to delivery by accompanying examinations. This integrated method to continuous quality inspection is due in large part to our success since more than 60 years. current certification to DIN EN ISO 9001:2008 Security. . . we offer even with delivery and processing of special materials, as we TÜV - have permission to re-stamping workpiece after the inspection certificate B (EN 500 49). Processing methods: CNC - Turning, CNC - Milling / drilling, boring, milling, turning, wire EDM, sawing, welding, blasting Summary Production of parts and assemblies by milling, turning, wire EDM, welding, assembly. Batch sizes for parts production: 10 to 20,000; (Focus: Stainless Steel) In-house design Fixture from lot size 1; Construction of soldering

AUTOMAC is your partner for innovative and reliable solutions in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet and in the field of contract manufacturing. We ensure that you get technically perfect equipment so that you can produce cost-effective and reliable. The benefits for you ● Design according to customer services. ● Maintained and tested machinery and equipment. ● Competent advice. ● Cost produce by cheaper investment. ● products with high quality standards. ● Meeting promptly manufacture of our products. ● Installation, maintenance, commissioning and service Services for the end user: ● Design according to customer services ● Plant ● Steel Construction ● Welding ● Samples and Sonderbau ● serial production ● cooperation in product development Contract Manufacturing: ● Turning, milling and drilling ● installation work ● welded assemblies ● coloring NEW! Flame cutting Service / burnouts plasma / oxy fuel cutting machine up to 150 mm thickness. Work table 6000 x 2000 mm Plasmamakieren, plasma graining possible. Welded assemblies, welding technology Reparaurdienst. Sandblasting of the modules / burnouts! Large suitability proof! Cabinet: We design, build and install cabinet systems in different designs according to the specific requirements and operating standards of their customers from the mechanical engineering and plant construction. The spectrum ranges from small control panels or panel to the simple cabinet to large cabinet lines - from the PC cabinet enclosures for up to big benefits. All procedures during project planning and production are subject to continuous quality control. Each cabinet is tested prior to delivery in accordance with the relevant national and international standards and wired to desire location worldwide and put into operation. Our products As a provider in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet, we offer a wide range of products and services. The products listed below are representative examples of our product portfolio dar. We develop customized solutions for you. Talk to us! ● Plant for the precast concrete industry ● conveyor and picking ● Milling Machines ● Handling Systems ● Lift Tables ● Storage Systems ● Presses ● Test Stands ● Welding and special devices ● Heavy load handling equipment (cranes) ● Vacuum lifting equipment ● Separation systems ● equipment for foundries ● Wrappers ● Special Machines ● Steel Construction ● Contract Manufacturing ● Service Services ● Control cabinet

WVG alu-tec GmbH has specialized in the development and production of cast elements of aluminum in permanent mold casting. One of our strengths is our flexibility in achieving the ideas and requirements of our customers in connection with the manufacture of products that meet the highest quality standards. Starting with the conception to the finished product and beyond in the packaging and logistics, we are your competent partner for consulting, design and development, production and surface finishing of cast aluminum parts. When it comes to innovative, economical solutions in the handling and processing of aluminum components, we offer you our complete service - "Everything under one roof" - to the side. We manufacture components made of cast aluminum for electrical, furniture, automotive, pumps, machinery, equipment and medical industries

Familienunternhemen, thereby - flexible - short distances - quickly Zertifizeirt Range of plastic thermoformed, routed. Max size 1200 x 2000 mm Thicknesses 1-14 mm all common thermoplastics

Production of die cast parts