More than 50 years of experience in tool production. Specialized in plastic injection and sheet metal forming tools 55 employees 80% automotive industry 50 new tools a year Manufacturing of hard steels in the range of 1500x700x600 Maximum tool weight 5 tons

Turning, milling, grinding with the highest precision from Reichenbach. Our strengths lie in subcontracting and complete processing, Manufacture and assembly of assemblies such as fixed and driven tool holders, individual part production such as housings, shaft pieces and the like, as well as the production of small and medium series.

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008. The activities of each company can be found in the following business areas again Textile • batching • centerwind • traveling cleaner • Transport systems (cheeses, roving bobbins, spinning cans) • suction and vacuum systems • coating and dry locations (use behind Web and knitting machines) • storage systems for bobbins • Palletiersysteme Contract production, such as • Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.) • Milled Parts • complete machine and plant construction according to customer requirements from design to Installation and Service • roller production (up to 8000 mm total length) • Locksmith • Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20) Commercial Vehicles • Production of portal elements • Profile editing • Installation • Coating -Machine Elements • Expanding shafts • Clamping Couplings • chucks and adapters • friction and blade shafts • Shaft handling -Kompressorenbau (shipping) • Start air compressors • pressure vessel • Industrial Compressors • compressed air starter • Air-conditioning • bilge oily water separator • Biological treatment plants Environmental engineering �� Screw mills, up to 120 m³ / h • starscreens • Shovel separators • air classifier Products for the steel industry • Band edge processing facilities • rolling mills ��� conveyor systems A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future. A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

We undertake the manufacture of complete assemblies and machines, according to the needs of your company, targeting to the maximum efficiency for your production. We utilize new technologies and production techniques to benefit our clients; the constant renewal of our equipment and renovation of our facilities prove our commitment to this goal. We also run a commercial section, offering a wide range of industrial components, spare parts, tools and raw materials. Tyrpanis Company was founded in 1968 by Ioannis Tyrpanis. Νowadays, it is being administrated by his sons and is situated in Lefki Xanthis, Greece, in proprietary facilities of over 3,000 sq.m. After 50 years of experience in the machine shop industry, it is considered as one of the top greek machine shops and retains partnerships with major technical companies and research institutes. We strive for the constant modernization of our equipment and internal procedures, aiming for the best outcome with our products and services. We perform various types of analyses in ferrous metals by use of SPECTRO laboratorial spectrometer, identifying the material of the provided sample. Our CNC machining operates in 3, 4 and 5 axis, using lathes and vertical machining centers by DMG MORI and Doosan Infracore. We are able of performing lathing and grinding works in shafts of length up to 8,000mm and diameter up to 1,250mm. We utilize a full instrument set of SKF for full alignment of pulleys and shafts, induction heater for easy and correct bearing placement, stroboscope, as well as a portable balancing device. We perform operations of steel carbonization and hardening, using specialized immersion furnaces by Durferrit.

The Glaeser Precision Turning Shop GmbH is a family-run business. It is our understanding that you as a customer of our company are also considered our partner. We solve your problems in conjunction with you. Short-term decision-making processes and flexible resetting capabilities ensure a fast implementation even of special demands. Necessary alterations we realize in short terms and without any loss of time. Adherence to delivery dates and short periods from placing the order to shipping can be taken for granted. Through the continuous enlargement of our manufacturing capabilities we grow with the challenges and tasks assigned to us by our customers. Both flexibility and reliability serve as the basis of our business policy. Decide in favour of quality! We always aim at your complete satisfaction and contentment.

The ASD engineering has specialized in the area of individual production of machine components, as well as small and medium series for almost all areas of mechanical engineering, special purpose machine and related industries around the metal processing. We loaded and processed but also plastics and non-metals. We deliver the complete part or the complete package with all the surface requirements and other requirements such as printing, embossing, labeling, etc. Individual Manufacturing The ASD Engineering manufactures you put your items according to drawings or on request by sketch. However, it is important to learn from you, the boundary conditions, so that a very good or better an excellent result. Milled parts up to a length of 1600 mm and turned parts up to a diameter of 600 mm, we can perform by finishing with all requirements of surface finish to special treatments such as anodizing or many other species.We deal with any machinable materials and leave us even when impossible demands something. We can also produce items made of sheet metal or as welded plate assembly including surface. You can trust us with sensitive requirements. Our customers in optics and metrology know, be that in ASD parts touched with "kid gloves" and well packaged. Our employees are highly qualified, of course, and sensitized in dealing with precision in the thousandths range, but also know the requirements can not be interpreted by the drawing is clearly evident in features. Series production The ASD engineering customized for you, even small and medium-sized series of lathes, milling machines - and sheet metal parts. With such highly complex parts, which generate in a large organization considerable administrative work at relatively small numbers and block the flow of production, we are the right partner.We are the service provider who supports your productivity, where he relieves you of the "productivity killer". Our business model is the lean organization with shortest paths and high information quality that characterizes us. You get the highest quality with minimal administrative effort. But even for companies who themselves have no production, we are the partner par excellence. We not only manufacture according to drawing, but also assist you in the design production-oriented "set up" for your part incl surface. Production and assembly of components The ASD Engineering also provides you with the manufacture and assembly of complete assemblies. These include welded assemblies or assembly units according to your wishes or with our assistance if you can describe to us exactly how the required function presents. We manufacture and procure the necessary parts and thereby also logistical tasks. Wish we can also obstruct parts provided, such as motors, pneumatic or electric elements orelectronic components. In cooperation with an external service provider, we also realize automation tasks and functional tests of the individual components. Please feel free to contact us for your requirement. We will find a solution!

We are a manufacturer of precision mechanical parts. Our machinery is made up of NC lathes, mills with 4th and 5th axes, NC grinding, EDM machines, laser marking. We design special equipment for clamping parts in the construction of gears.

The company Železnobrodské Strojírny sro is located in Northern Bohemia in the town of Železný Brod. The company was founded in 1965 as a main supplier of glass machines for the Liberec region. At present, the company employs 20 MA and is oriented towards general mechanical engineering. JOB SHOP Production area approx. 2000m2 EN ISO 9001: 2016

Established in 2002, Clustertech International is automated roulette wheels factory. Our name derives from the cluster of technologies that we use in-house, namely: - Metal processing: CNC milling machines, CNC lathes, polishing and galvanizing of metals ( nickel plating and gilding) - Wood processing: wacuum drying of wood, 5 axis CNC milling machine for wood and varnishing wood - Electronics.

WHO WE ARE We are a group of artisan companies, mainly metalworkers, who have been working together for more than 40 years, gathered since 27 November 1980 in the Milanese Consortium of artisans of production. The associated companies operate in the subcontracting market and, specializing in different processes or even competitors with each other, collaborate in the execution of the orders of a medium-high customer acquired by the Consortium. Comarp thus presents itself on the market as a single reality. Our uniqueness is the offer of a Unique Service in Italy: we deal entirely with the realization of complex orders by offering our customers a “turnkey” product. This is possible thanks to the plurality of Comarp constituent companies that come together as a single interlocutor to better serve customers. Cancellation of problems related to logistics, time savings and lower costs are immediate competitive advantages deriving from our service. The values that have always guided us are the satisfaction and priority of our customers. The Comarp receives the order from the customer which can be on a working account or in a complete supply. Once the order has been acquired, Comarp develops the order to the Members according to the processes to be performed. SPECIALIZATION Co.m.ar.p realizes the finished product or complete processing cycles with interventions of: turning milling toothing grinding boring cutting, deep drawing, punching, bending HVOF PNTA cladding laser cladding (in Italy the only one for third party) Consortium works on behalf of third parties ranging from the production of small parts to medium and large mechanical technical details, based on the customer’s design. The company performs precision mechanical machining. ADVANTAGES This organization of the work and the atmosphere of collaboration between the members goes to the customer’s whole, not only in terms of speed of deliveries but also in terms of quality of the work done. The complementarity between the companies that together can offer complete production cycles is the winner.

Our Company's History and Development Tometh KFT was founded in 1997 as the successor to a sole proprietorship that had been operating for five years, with the aim of providing high-tech solutions for the engineering industry, prioritizing customer needs. Over the years, we have continuously expanded our workforce and machine park. Today, we operate more than 20 modern, computer-controlled production equipment, and our team has grown to 52 employees. We have been operating our ISO 9001 quality management system since 2002, which is now fully integrated into our in-house developed production management system, supporting quality-focused manufacturing. In addition, in 2019, we implemented the ISO 14001:2015 environmental management system, reaffirming our commitment to sustainability and environmental responsibility. We utilize a modern enterprise management and MES system in production, and we have been operating paperlessly for nearly 12 years, with a strong emphasis on digital systems for data collection and statistical analysis. Our goal is to achieve robotic machine servicing for medium-batch production (1-500 units) and to implement robotic shop floor logistics. We already have operational divisions in this area, supporting efficient and innovative production. Through technological developments, we have also established the conditions for manufacturing and assembling assembled units. Currently, we produce 50-100 different assembled units and over 1,000 types of parts, regularly serving about 20 clients. In recent years, small-batch assembled unit production has opened up a new, strategic field for us. We use our CAD-CAM systems not only to support our own manufacturing processes but also to provide design and prototype manufacturing services for our clients. Our goal is to offer long-term, value-added partnerships to our customers through our modern technological expertise, contributing to their competitiveness and success.

We are a company with over 20 years of experience in the supply of custom mechanical components.(specialized in supplying custom mechanical components with over 20 years of experience.) We take care of your supply needs from the moment we receive your request for quotation until the shipment from our warehouse. Once your request for an offer has been received, we take care of: 1) Identify the most suitable technology to reduce costs and create complex parts 2) Dialogue with suitable and economically competitive suppliers 3) Let us introduce you to our best offer Once your purchase order has been received, we take care of: 4) Follow the sampling and certification phase of the product 5) Manage production advances in accordance with the required timelines When the goods arrive at our warehouse, we will take care of: 6) Perform a statistical check in acceptance 7) Pack and ship the goods according to your needs 8) Manage reorder quantities from a Kanban perspective We can provide finished items that require multiple processes such as: > Heat treatments > Surface treatments > Additional processing (e.g.: assembly, shooting, rectification, etc.) We are able to offer this service thanks to our mechanical and procurement skills, to our structure in northeastern Italy and to a network of production partners present in Italy and Asia. We are fluent in Italian, German and English. Contact us to learn about our team, our technologies and our prices.

Core competences «We cannot be the best in every aspect. Therefore, we have positioned ourselves at the top where our core competences lie.» Electrical Discharge Machining (EDM): In 1969, we bought our first electrical discharge machine, which has been the foundation for our most important core capability. EDM very soon proved to be one of the promising new key technologies in metalworking. We have continually expanded our experience in die sinking and wire EDM and, these days, count ourselves amongst the leading contract manufacturers for precise metal machining. It is not the ten machines that we productively utilise every day that are getting us further, but the very high standards of our customers for surface quality and precision forming. The advantages of EDM are: no mechanical stress to the metal piece, no limitations through hard metal grade or shape, high degree of machine autonomy, greater design possibilities at engineering level. Only an EDM-compatible design will profit from all EDM benefits – a piece of advice our customers will gladly follow. Tungsten carbide working: «It is the combination of knowledge of materials and knowledge of methods that form a basis for the skilled working of hard metal.» We have managed to form a solid base to work tungsten carbide parts efficiently by liaising intensively with the outstanding tungsten carbide manufacturer Metzger Ltd, Lotzwil/Switzerland, and by meeting the very high standards of our customers. We support our customers when it comes to choosing the right hard metal and the most suitable methods such as grinding and abrasion, polishing and extrude-honing and also provide the handling during and after the production process. Only perfectly manufactured hard metal parts will convince the customer to pay a higher unit price. Laser Machining: As with EDM, we decided early (1986) to go with this new key technology. We have been using the Nd:YAG pulsed laser (LASAG) for laser welding, cutting, drilling, marking and laser cladding. The high power pulse and high beam quality melt or vaporise nearly all known materials. Lasering is used to produce microstructures and to connect highly challenging geometrical shapes by conduction welding. The same rules apply as for EDM: only a laser-compatible design will be able to take advantage of all the benefits laser technology has to offer.

We specialise in producing, overhauling and repairs of small pneumatic and hydraulic small mechanization devices for the mining industry. In addition, we provide services in the fields of metalworking, machining and welding using MIG/MAG and TIG methods.

Diene production services Precision and experience. manroland is the world's second-largest press manufacturer with about 900 employees. The printing presses lives of precision. You can profetieren it, for manroland has many years of expertise as a world leader not only in sophisticated printing machines: Our professionals bring their years of experience with a manufacturing services for you. Quality testing and certification. manroland is certified according to DIN EN ISO 9001:2000 and DIN EN ISO 14001:2005. Annual audits ensure the honing demands on the processes safely. With our machines almost every feature can be verifizeirt professional manner. In addition, our laboratories provide materials analysis and Schlissbilder. Own foundry. The foundry with integrated model for large parts in Offenbach with an annual volume of up to 17,000 tonnes of cast iron saves valuable time in the match between model-making, foundry and manufacturing.For shorter lead times and lower costs for our customers. Diverse range of parts. From the lever through gears in Meisterradqualität to extremely heavy side walls, with tolerances of a few microns, thanks to a modern machine park. Also the production of any workpieces from batch size one is in the fast group everyday. Rotary bulk of production Rollers and cylinders. manroland offers the complete process chain for machining of cylinders and rollers: Turning, milling and drilling into a voltage on modern CNC machining centers and final grinding. There are also successful partnerships for gavanische surface finishing. Non-circular grinding. The special features of the machinery for rolling and the cylinder with appropriate controls is also the non-circular machining of precisely defined contours no problem. Prismatic large-part manufacturing Bulk of production.manroland manufacture components with size 2.2 meters wide x 2.5 meters long x 2 meters in height and weighing up to 2 tons. In the doubles table operating a processing to eleven meters in length. Our machines operate with a capacity of up to 100 kilowatts. Tools with a diameter up to 315 mm cutting depths allow con about 15 to 20 millimeters compared Gussverzüge and cast tension, with high-precision manufacturing of drilling intervals. Flat part manufacturing. CNC machine tools allow the highly efficient production of cubic flat parts with a machining of up to five pages in one setting. The machine tools are mostly equipped with special Ganauigkeitspakete ensure the highest quality for large component dimensions. Prismatic workpieces geometry primarily by complete machining on special parts that meet any of aluminum are in high quality requirements for CE-safety-related parts.For this we use a moderene five-axis machining round. Complete production Complete machining. The device construction, the tool engineering and CNC programming are aligned short response time for changes and new parts. Complex cubic workpieces are manufactured in several setups in multi-range operating on different processing centers: Small series of cast blanks with complex hole pattern and high quality requirements (up to it5) are among the references (levers, rails, slats and gear housing). Turned parts. Rings, flanges and wheels of medium dimensions are produced, but also gear shafts or special Exzentergleitlager with tolerance ranges of up to seven microns, including modern external and internal cylindrical grinding techno...

The company Officina Meccanica Bruegger srl (OMB) is situated in Como, a strategic point between Milan and Switzerland. For two generations OMB is specialized in the production of high-precision mechanical parts. Thanks to the continuous development in the production and engineering OMB has a complete and modern production and offers a complete service: Our services: • Design and Engineering of new high-precision mechanical parts. • Realising of prototypes and samples • Production of series • Different surface finishing’s of the parts • Assembling according to customers specifications • Testing according to customers specifications In the Engineering we use following Cad/Cam Systems: ProE, Soldi Works, Rhino, Sum3D und Pacw. The drawing can be sent in following files: dxf, dwg or iges. In the production we use metal and plastic materials as for example: METAL • iron • stainless steel • brass • cupper • aluminium • Hastalloy • Monel • Other alloys PLASTIC • PVC • POM • PP • TEFLON • PEEK • VESPL • PC • PA • Plexiglas • Reinforced and not reinforced plastic materials Of course we organise almost all surface finishing’s on request: HEAT TREATMENT • Hardening • Cementation • Nitriding SURFACE TREATMENT • Anodizing natural and coloured • Hard anodizing • Galvanizing • Chromium plated • Alodine • Nickel plated, electrolytical and chemical

In the field of mechanical manufacturing, we sin supplier for a variety of applications. We offer customized and cost effective solutions to your manufacturing problems. Our team has excellent experience in the production of individual parts, small series and assemblies for vacuum systems of the thin-film technology, microelectronics, electron beam technology, special purpose machines of the general mechanical engineering. Revision of steels and materials that vakuumtechn. Requirements (eg, V2A, V4A, Inconel, Monel, bronze, copper), aluminum plastics such as POM, Ertalon, Peek, PTFE etc. Production of small recipients and chambers of the UHV and HV technology Performing welding operations, the vakkumtechn. Satisfy requirements such as leak rate, discharge pressure and pressure test.