GAMBA - precision machining since 1935. Gamba is specialized in manufacturing complex and high precision components due to their geometry, tolerances and hard materials. Dimension size varies between 1 and 500 mm. Production lots are spanning from few dozens to thousands of units. Precision is guaranteed by the full internal machining, including turning, milling, grinding, honing and further services such as sandblasting, vibroblasting, laser marker, assembly and others. Factory is located in the province of Bergamo, a key industrial area of Italy. Commercial and administrative offices are in Milan.

"Precise for you." With this quality requirement, we welcome you in the world of SERA Metallbautechnik. We not only commit ourselves to the highest precision in the production - our focus is on your unrestricted satisfaction.

Nowadays manufacturing is almost unthinkable without the modern CAD-CAM technology. Therefore the GAT company consistently follows trends in this area by permanent technologists' training and investing in softwares. We offer the following services: • Projects made by orders • Prototyping • CNC turning • CNC milling • Trovalization • Shot blasting • Ball polishing • Anodizing • Laser engraving • Assembly

Workings begin with co-design together with the customer, continuing with the in-depth study of the work cycle, the choice of additional materials and treatments to be carried out to the realization of the prototypes. Production is supported by careful process control. In addition, all stages are interwoven with washing machines performed with ultrasonic machines to avoid any residue inside. The packaging and shipment arrangements are made according to the specific requirements of the customer, thus guaranteeing the absolute protection of the product.

Welcome to the Nachbur AG, your specialist for turned parts, precision turned parts, turned parts and assembly The Nachbur AG is a specialist for components and turned parts. So we manufacture precision turned parts, turned parts and turned parts. In addition, the assembly is part of our field of activity. We will work for you as a contract manufacturer. Whether CNC turning, production of precision parts or assembly - we put the customer at the center. 1947, our company was founded for turning parts and assemblies. Since then we have gained extensive know-how for the production of precision turned parts, turned parts and lathe parts. A strength of our company is the high quality of the turned parts and assemblies. All production processes of Decolletage and assembly are strictly monitored. Our quality management system for the rotating parts is also certified. Also an environmentally conscious production of precision turned parts, turned parts and lathe parts sets us apart.For the environmentally friendly production of Decolletage our professionals develop special programs. For example, we pay attention during the shooting as well as the assembly always on the conservation of resources. Our environmental management system for the rotating parts is also certified. In our Dreherei the latest machines for turning are available. For the rotational work naturally includes sanding and cleaning the long turning parts, turned parts, and precision turned parts. Thanks to a strong partner to deliver the CNC takes place - Turned parts worldwide. The Nachbur AG offers customers in the filming of various solutions. We manufacture pattern of precision turned parts, turned parts and lathe parts. Do the rotating parts to the customer, we ask this in produce small to large series. Our precision parts and Turned Parts are used in various industries. How to find long turning parts, precision turned parts and turned parts used in medicine, hydraulics and electronics industry.

VOP GmbH is a relatively young and dynamically developing company with 100% private capital strength. VOP GmbH was founded by nine partners in 1990 as a partnership with limited liability. The partners have many years of experience in the field of designing and manufacturing of complex manipulators for the microelectronics industry. The basic activity of VOP Ltd. is a development, production and marketing of equipment for dental laboratories. All products are the intellectual property of VOP GmbH. The production capacity and the main office of the company located in the city Botevgrad, which is 50 km from the capital Sofia. The prädominierte part of the production equipment beshteht of metalworking machines with CNC - Control. In the company work 60 highly skilled workers. Since 1997 - Certification according to ISO 9002. All VOP - products are marked with CE marking according to the EC - Guidelines for Health and Safety requirements. Since 2003 - ISO 9001:2000 certification. Since 2009 ISO 9001:2008 certification For years now to VOP Ltd. has permeated the market.

The machines and drives Maschinenbau GmbH & Co. KG from Güstrow manufactures complete customer order, or edited after drawing Kundenbeistellungen. We are contract manufacturer in the areas of turning, milling, gear cutting, grinding and broaching. Our machinery is to small - designed and medium batch production. We can offer our customers the assembly of components including coloring. We are certified according to DIN EN ISO 9001:2000 and DIN EN ISO 14001:2004 Information about the structure of our company, see http://www.maguestrow.de

Comec offers its services to the international market for the production of small- and medium-sized batches of high precision parts. Our machines are equipped with control probes that allow the dimensions to be checked while the piece is still in the machine, thus avoiding repositioning that would decrease the required precision. Furthermore, thermal probes on the principal axes prevent linear expansion from reflecting upon the precision of the piece being manufactured. The use of certified materials from qualified suppliers is a guarantee for the origin of the raw material, the traceability of which can always be verified. We can provide finished parts with heat and surface treatments, working with contractors who treat the parts with the attention that Comec requires. Our main activities regard: •manufacturing of materials that we provide; •manufacturing of materials and semi-finished pieces provided by the client; •repairs and restorations of mechanical parts or machine parts, creating the design of the part if it is not available; We can work with parts made of iron, cast iron, common, special, and stainless steels, and non-ferrous materials, including aluminum, bronze, brass, copper, and plastic products. We can provide the mechanical pieces complete with heat and surface treatments: - Hardening, induction hardening, nitriding, Tenifer processing, black nitriding; - Chemical browning, manganese phosphating, electroless nickel plating, galvanizing, yellow tropicalization, and chrome and chromium nitride plating. To simulate the manufacturing processes and formulate a quotation as precise as possible, we kindly request 3D drawings.

Ladies and Gentlemen’s, We are a Polish producer of mechanical parts. We employ qualified engineers for the production processes and quality control. Production processes are prepared on the based of an insightful analysis of customer requirements, and own production capacity. The price offer is also a guarantee for the customer, receives a product that complies with the requirements of quality and strictly within the agreed delivery period. We produce and delivery: 1. CNC turning of metal parts with a maximum diameter of 250 mm and a length of 400 mm. - the accuracy of turning +/- 0,005mm (IT5-IT6) - obtained surface quality to Ra0,63 / Rz4 - machined materials: Stainless steel, black steel, aluminum alloys, copper alloys, plastics; 2. CNC 4-axis milling of metal parts with maximum dimensions 750x500x500 mm. -precision of milling +/- 0.01 mm (IT6)? -the resulting surface quality to Ra0,8 / Rz6,3 - machined materials: Stainless steel, black steel, aluminium alloys, copper alloys, plastics 3. We cooperate with carefully selected service providers for the following areas: - laser cutting of sheet metal - thickness up to 20mm - plasma cutting sheet metal - thickness up to 100 mm - sheet metal bending on press brakes - MIG, MAG and TIG welding - other processes related to the machining of sheet metal and welded machine parts (shot blasting, powder coating) We provide production of parts strictly according to customer requirements, by working on our own quality assurance system based on the requirements of our customers from Switzerland and Germany, consisting in: - preparation of production including a detailed analysis of the customer's requirements - careful control of acceptance materials and semi-products - systematic inspections during production and immediately corrective actions - specific selection process for material suppliers and subcontractors of additional services - careful protection of goods during delivery to the customer Best regards Eng. Karol Miaskiewicz CEO Tech-Project Tel. +48 609 425 898 Email K.Miaskiewicz@tech-project.eu

We are an owner-managed, medium-sized company in the tool and mold making sector. The family business has been based in the Höxter district in East Westphalia since 1961 - in the three-country corner: North Rhine-Westphalia, Hesse and Lower Saxony. Our many years of experience in the field of tool design and production make us - a team of young and dynamic employees - a competent partner for our customers. Cooperation and Innovation: The employees are the most important element in our endeavors to look after customers at a high level, to develop and implement solutions. Personal interaction and cooperation are characterized by appreciation, recognition, team spirit and mutual respect. Communication is open and constructive. Every employee feels responsible for the entire company and is called upon to make innovative suggestions for improvement to ensure that the existing procedures and processes are optimal. So everyone contributes to the overall success of the company.

We specialize in the manufacture of complex components of the tooling and engineering, typically in the lot size "one" and even small lots & prototypes. We are equipped with machinery that covers the entire process chain of such components. From the pre-and soft processing, about the hardships in the area of the tool and machine typical types of steel, extends to the finish in air-conditioned rooms, our machinery. Machining Centers / Drilling / milling from DMG / DMU and Hermle, Roeder HSC milling, turning / lathe Mori Seiki and Okuma, grinders grinding / Jig Grinding by Hauser, Kellenberger, and the young and the EDM / DEM Wire EDM / EDM SEM from AgieCharmilles and OPS / Ingersoll are installed by us. With 170 machine operators and 120 machines we make about 450,000 per year production hours. We manufacture plates, frames, stamp guide plates, molded frames, moldings, 3D-shaped parts, guide plates, stripper, stripper plates and precision parts such as stamps, molds up to a size of 2000 x 1700, 3D parts up to 1700 x 1400, turned parts up to diameter 650 x 1000 In-house hardening, coatings (PVD, TiN, TiCN, CrN, WCC) in cooperation. The materials we specialize in tool steels, high alloy steels (1.2379, 1.2343 ESR, 1.2344, 1.2311, 1.2312, 1.3343, Divar) powder metallurgy steels, PM steels (CPM, ASP, Vanadis VAN, REX, Hotvar) as well as hard metal carbide ( G10, G20, G30, K10, K20, K40, H40S).

Seek help from the production of small and medium series for CNC turning and CNC milling parts? You want everything from one source? All in best quality, on schedule and cost? Then you've come to the right place! Production profile CNC - Turning * Lining parts and shafts of Ø 8 mm to Ø 330 mm, up to a length of 880 mm * Threads, including taper threads * Radial and axial grooves * Contour machining with internal and external radii and taper hard turning CNC - Milling * Parts of sizes up to 1000 x 750 x 300 (no five-face machining) * Parts of sizes up to 750 x 750 x 200 (five-sided machining possible) * Five-sided machining * Milling contours * Inclined holes Drill and mill * Thread * Deep drilling up to 35 x D o eg 3 mm diameter x 105 deep o eg Ø 4 mm x 140 mm deep o forB. Ø 7 mm x 245 mm deep Injection systems for marine and rail diesel engines * Plunger, nozzle nuts, intermediate plates, * Sealing rings, * Flapper, piston ring, thrust pads, * Follower rollers, * Adjusting spindles, bearing flanges, housings, * Valve adapter etc. Pipeline and tank construction * Nozzle heads, reducers, * Adapters, connectors, * Clutches, lids, etc. Heating and Fittings Laboratory Equipment Vehicle Engineering Mould

We are a small family manufacturing company that has specialized in the realization of any claims or demands of our clients in the field of mechanical engineering. Our core business is Cnc milling and we can offer you milling range up to 1250x600x650.(5 machines) Production site is located in Samobor, CROATIA near capital Zagreb,2 km form highways A1,A3,A4. Offer: -Milling -Form milling -Engraver milling -Spark erosion wire cutting -Spark erosion and Etching -Injection moulding -Stamped and sheet metal formed parts

Production service aspiring to perfection We are happy to take on highly complex production assignments for our customers and to elaborate quality solutions which aspire to achieve perfection. Every division of ZELTWANGER Maschinenbau GmbH takes this ambitious aspiration as the quality standard for its day-to-day work. But the most important factor in our company is its workforce: a rock-solid, totally reliable team of men and women whose commitment and enthusiasm for their work and the manufacture of top quality products spurs them on to achieve ambitious standards and ever higher performance with each passing day. It is this motivation which has created scope for our extreme work time flexibility. We produce in two to three shifts six days a week. Our entire technical innovative drive and resolute quality orientation are channelled into the production of challenging prototypes, complete assemblies, small-scale series and individual components. Production processes High-tech is the standard at ZELTWANGER Maschinenbau GmbH. This is reflected in our highly qualified team of specialists, in our logistical division of labour, and in our use of the very latest production processes and technologies. Our machining centres and lines are programmed and controlled over a central network. Innovative 3D programming systems permit even the most complex workpiece contours to be machined. In the metal cutting field, our CNC milling centres use 5-sided machining techniques. All our lathes are fitted with power tools and with a C and Y axis. Our products are characterized by optimum grinding results with millimetre range precision for the ultimate in productivity. With our high-precision spark erosion cutting machines we also have the capability to manufacture custom-produced parts and small-scale series in-house. Materials - broad selection, quick availability Alongside our extensive ultra-modern machine outfit, we also benefit from a wide range of stocked materials in our automatic high-bay warehouse. These include all steel, titanium, stainless steel and high-strength alloys as well as all popularly requested aluminium alloys. We also offer a raw material procurement and storage service to customer order.

Werkzeugbau Wörgartner GmbH was founded in 2005 by managing director Peter Wörgartner. Since its founding, the company, as well as its machinery, have been constantly growing. Through close and in-house cooperation with Wörgartner Produktions GmbH, expertise and many years of experience with punching and sequencing tools are combined in particular. This makes it possible to achieve targeted results of the highest quality in record time. Werkzeugbau Wörgartner GmbH uses a large part of its capacities to produce spare parts for its customers. Numerous wire eroding machines, as well as profile grinding machines and flat grinding machines, are available for this work. In addition, there are not only a few 3-axis milling machines and a 5-axis milling machine with pallet changer, but also 3 5-axis HSC milling machines, specifically for processing hardened materials and also hard metal. However, Werkzeugbau Wörgartner GmbH not only supports you in the production of contract tools or spare parts, it also provides you with expert advice from the entire design department. Many years of experience in this area have already led to lasting partnerships in many areas and projects. So if you are looking for a partner who will support you in all areas of toolmaking technology, from planning to the finished part, then contact Werkzeugbau Wörgartner GmbH.

Our company was born in January 1986 under the name of MECBAR Snc Founder Teodoro Bartolini, who after over fifteen years of experience in the field Of mechanics, as an entrepreneur, decides to collaborate with his children. The intention is to specialize in the construction of precision equipment for multiple fields Of application, today has been achieved thanks to a gradual development in the no time Never overlook the quality standard that has always characterized us. The equipment of our production is built entirely within Our company using our ever-updating machinery under the look Technological development and this constant development has allowed us to specialize in the machining Milling of hardened materials also over 62 HRC of hardness, in machining of Drilling, threading and milling of hard metal, also over 1600 Vickers, with mole and Polycrystalline diamond cutters and also tempered and non-tempered materials, with Dimensional and geometric precisions less than 0.005 mm obtaining a degree of finishing With a Ra of between 0.3-0.7.

Workings: turning milling correction induction hardening Components: Sleeve Pin joint shell Flange Spacer