PREFAG has been located in Walzbachtal for more than 65 years. We are a strong partner as a supplier in sectors such as industry, medicine, aviation and automotive. Our qualified expert team actively supports customers and suppliers in the development of new components and assemblies. The complex and miniaturized turned parts up to ø30 mm are our core competence. We have innovative strategies and a high level of vertical integration in the manufacture of short and long turned parts - including further processing, eg heat and surface treatments.

Tessari Luigi & C. snc was established in Soliera in 1978 as a grinding plant for the mechanical industry, a sector in which the previous owner had acquired considerable experience. Over the years, the company has built up a solid portfolio of customers for which it grinds parts for hydraulic systems, a field where it continues to excel. In 1992, the company was acquired by the current owners who, while maintaining the same business name, decided to develop the service provided to the customers to a further extent. So much so, a turning department was added in 1996 and the company moved to its current headquarters owing to the need for more space. We are specialized in machining HYDRAULIC COMPONENTS and our long-standing customers are leading enterprises in this sector. Since our organization is so flexible, we can adapt to the customers’ specific requirements and ensure prompt, timely deliveries. On-going technological updating and constant attention to the customer, always considered a business partner by the company, are the strong points of Tessari Luigi & C. s.n.c.

The Techno Trans GmbH making for over forty years (emerged from the former "screw") Quality and precision work and is dedicated to the manufacture of special tools a) for chipless forming for hot and cold forming presses: such as matrices, and Matritzenfassungen - inserts, extrusion rams, hole and Auswerfernadeln b.) for metal shaping for single - and multi-spindle automatic lathes and fitting and special machines. eg clamping and feeding tongs, clamps, steel holder and smaller devices. Round shape chisel, flat chisel shape, Tangentialmeißel, inner shape chisel, shaping tools and countersink. We also accept Turning-milling and drilling operations outside round, inside round and Flaschleifarbeiten, and profile grinding As a service we also offer the repositioning of tools to

Based in Canton Ticino, Premec Tools has a mechanical engineering technical office and a precision mechanical workshop equipped with two 3-axis and 4-axis CNC machining centres, a CNC lathe, a CNC grinding machine for internal and external use, traditional lathes, milling machines and grinders and two CNC plunge erosions. Premec Tools can lend its skills to companies in the design and manufacture of precision prototypes in different materials, with application in any industrial field. Structure, systems and resources make Premec tools a reliable and flexible partner for complex and urgent production. Premec Tools Precision tools for more than just the writing sector. Available machines Rosa Flat Grinding 700×450 Studer Round grinding Ø100 L=200 Studer Internal Grinding from Ø0.8 to Ø120 Studer Internal External CNC Grinding Machine from Ø 0.8 to Ø 30 L=30 => Øe40 L=120 Studer Internal External CNC Grinding Machine from Ø 4.0 to Ø 150 L=400 Biglia Lathes machine CNC Ø150 L=500 Biglia Lathes machine CNC Ø150 L=500 with loader bar CB Ferrari 4-axis CNC machining centres programmable with CAD-CAM 1100×660 h660 Digma High speed machining centre programmable with CAD-CAM Agie EDM Electrical discharge machining Sigma Laser welding machine Laser engraving Zeiss Coordinate Measuring Machines (CMM) Discover how we can put our precision tools, technical office and workshop to work for you. Contact us

As a Swiss company in the field of precision CNC milling and turning, we offer turned and milled parts of the highest quality, always on time and at competitive prices. You will never look for other CNC service providers again!

We are a small company in the heart of the Rhön our specialty is the production of waves of all kinds of diameter 12-360mm and a length up to 1590mm, turned parts up to diameter 450mm, external cylindrical grinding from 10 to 350mm and a length up to 1600mm at a max. Workpiece weight of 500kg. Single and series production Materials: We process steel, stainless steel and cast iron and aluminum Delivery program: Shafts, pistons, bushings, rings, discs, shafts, pulleys, housings, hubs, coupling flanges, spindles, drive shafts, shaft, pistons, jack, wheel, axle, pulley, hub, spindle, drive shaft, turned parts, external grinding, milling parts, lathe parts, automatic turned parts, galettes, shaft supplier, supplier shaft, shaft supplier, hollow shafts, solid shafts

QBER Srl, a consolidated company in the production of high quality mechanical parts. For over 50 years we have been working with important Italian and foreign companies that need reliable and serious partners, managing to guarantee them an excellent level of technological performance at low costs and fast delivery times. Our production is directed to the petrochemical, energy, automotive, pipe mills and wire technology sectors. The experience gained allows us to work different types of materials: steel, stainless steel, cast iron, non-ferrous materials and heat-resistant alloys. We also process materials for the production of tools such as hard metal and ceramics. A team that collaborates with commitment and a fleet of machines in continuous renewal and expansion are our response to the continuous challenges that the market offers us. From design to production, from outbound quality control to after-sales assistance. The entire production cycle takes place within our facility, which provides both single special mechanical processing and mass production.

HGE GmbH in Elzach The company was founded 1965 by Helmut Gießler operates with its pre-finished precision parts and assemblies as a supplier to the automotive industry, as well as the machine and tool. The direct contact with our customers allows us to respond quickly to the ever changing market situation and support our customers optimally in the development phase. Our goal is to work together with the customer to optimize product and process cost. The company is located in Elzach and currently employs approximately 50 people, is 27 km from Freiburg and 38 km from Offenburg.

CNC precision turned parts of the precision experts! For over 40 years, designs and manufactures the Anlauff GmbH Precision turned parts and assemblies in a variety of materials such as steel, stainless steel, aluminum, brass, bronze and even plastic. A detailed list of materials is listed below. Our many years of experience as a top supplier of reputable companies that specific industry knowledge, eg in the automotive, hydraulic engineering, electrical engineering and hardware technology for maximum quality and maximum efficiency. We produce at the site Zimmern ob Rottweil (Baden-Württemberg) CNC machining parts according to your drawings and support you in the realization of individual rotating parts and assemblies. As sample parts in small batches from 1000 pieces and high-volume to 100,000 piece we produce fast, flexible and on time. Furthermore, we also offer an extensive parts service as Heat treatments ***: *** - Case hardening, annealing, induction hardening - Tenifer, tempering, hardening and tempering Surface finishes ***: *** - Zinc (Blue, Yellow, Olive, Black), thick-film passivation (Cr-VI-free) - Zinc / nickel, zinc / iron andvm - Tin plating, nickel plating, copper plating, hard chrome plating - Anodizing, phosphating, bronzing Finishes ***: *** - Milling, deep hole drilling, thread rolling, broaching, honing, bending, marking - Vibratory finishing, polishing, deburring, washing, inner and outer loops Processed materials: - 11SMnPb30 1.0718, 1.0715 11SMn30, - C15PB 1.0403, 1.0401 C15 - 100Cr6 1.3505 - 16MnCrS5 1.7139 - 42CrMoS4 1.7227 - ETG88, ESP65 - POM - MS58 CuZn39Pb3 2.0401 - CuSn12 2.1052 - Gunmetal CuSn7ZnPb 2.1090 - AlCuBiPb, AlCu6BiPb 2011 3.1655 - AlCuMgPb, AlCu4PbMgMn 2007 3.1645 - AlMgSiPb 6012 3.0615 - AlZn5Mg3Cu AlZnMgCu0, 5 7022 3.4345 - AlMgSiMnBiPb 6026 - AlMg4, 5Mn0, 7 3.3547 5083 - AlUn5, 5MgCu AlZnMgCu1, 5 7075 3.4365 - AIMgSi AlMgSi0, 5 6060 3.3206 - AlSi1MgMn AlMgSi1 3.2315 - Stainless steel 1.4305, 1.4301, 1.4021,

PONAS, s.r.o. was founded in 2003 in Považská Bystrica as a construction and trading company in the field of mechanical engineering. Gradualy, it started with the implementation of produktion in the field of clamping fixtures and precision parts for single - piece and small- series produktion. 2003 Company founded 2012 Start of produktion activities 2014 Acquisition of the Swiss - Slovak company KONVEX Technology, s.r.o. 2021 Purchase of a produktion hall 2022 Acquisition of the Slovak company PS Kovovýroba, s.r.o.

As a full-line partner, RIBE Automation GmbH develops customized and innovative automation solutions for various industrial sectors in order to increase efficiency and precision in production processes. Core competencies: - Development & design - Assembly & commissioning - CNC - Service & Aftersales - Control technology - Robotics - 3D printing RIBE Automation Romania GmbH offers process development and process engineering services for integrated technologies such as ultrasonic punch welding and punch bonding of car bumpers, especially for exterior and interior applications for the automotive industry.

The Stahlwasserbau Beeskow GmbH is a regional leader in the fields of steel hydraulic, materials handling, industrial and commercial service. We offer our customers complete solutions from a single source - engineering, production, installation, maintenance, service and repair. Here are excellent quality and flexibility to the company's strengths. Achieving total customer satisfaction, but we work with our more than 80 employees every day. In 2015 we won the Innovation Award of the State of Brandenburg and have been awarded in 2016 as a finalist at the Grand Prix of the middle class, which we are very proud.

Die heutige DEURINGER GmbH wurde im Jahre 1989 vom Firmeninhaber Wolfgang Deuringer, als Einzelfirma gegründet. Erstprodukt: CNC-Fertigteile nach Kundenzeichnungen 1992: Beziehen des Neubaus in der Adolph-Kolping-Straße 2 1996: Erweiterungsbau - Materiallager 1997: Umbenennung in DEURINGER GmbH 1998: Erweiterungsbau und Außenanlagen 2001: Erweiterungsbau Ausbildungswerkstätte 2003: Erweiterungsbau Bürogebäude 2004: Neubau Kantine/Schulungsraum 2005: Erweiterung der Fertigung (Drahterodieren) 2007: Neubau Lagerhalle Unsere Fertigung erstreckt sich auf über 1000qm, auf der mit modernsten Maschinen hochwertige Produkte entstehen. Wir fräsen, drehen, bohren oder schleifen Einzelteile, Serienteile und komplette Baugruppen für: - Transporteinheiten - Dämpfereinheiten im Bereich Auto- und Motorsport - Elektrotechnik z.B. kpl. Lichtleiter-Verbindungen, Kühlkörper, Gehäuse, Aufbauplatten - Logistiksysteme der Zuführereinheiten, Transportsysteme - Papiermaschinen, Verpackungsmaschinen und Kartonagen - Strömungstechnik z.B. Ventile für Sonderpumpen, Verteilungssysteme für Luft und Öl, Düsen - Recyclinganlagen z.B. Kameragehäuse, Sotiereinrichtungen - chemische Anlagen, über- und Unterdruck-Einrichtungen, Verschlüsse an Gehäusen Unser Unternehmen hat sich heute als Lohnfertiger mit folgenden Fertigungsarten etabliert: CNC - Drehen, Einzel- und Serienteile CNC - Fräsen, Einzel- und Serienteile Flachschleifen und Drahterodieren Innenrund-und Außenrundschleifen Fertigung von Systembaugruppen auch mit Elektrik Härten

The company "Horjak-PRECISE" Domžale doo was founded in 1990, but the beginnings date back to 1957. Very soon after the foundation was started to establish direct links with European companies. For this the CNC machining and machining products are manufactured according to the drawing in the field. Mainly working Horjak-Precise DOO Domzale for companies from Europe, the focus is on Austria, Germany, the Netherlands, Hungary, Spain, Poland and the UK. The production range includes the production of -Precision metal parts for brake systems, rail and road vehicles -Various rollers and shafts for printing machines -Precision-engineered metal products for the optics -Various machine components for other industrial sectors Mainly are the strengths in the manufacture of turned and milled parts in small and medium series. All products are subjected to both intermediate and final inspections, strictly according to the ISO 9001 specifications Since March 2006, the company is angesidelt in a new production hall on 6000 square meters and has about 80-100 employees. It is working with about 30 different partners. Our motto is: "We strive for perfection."

As a specialist in special transmissions, RSGetriebe has been developing tailor-made drive systems that set standards across the industry for over half a century. The transmission experts from Sonthofen will find the right solution for every sector and application.

Experience and Innovation More than 30 years of experience in the field of metal processing form the basis for our daily business. National as well as global industrial customers from various industries, we count among our customers. We manufacture and procure almost everything is manufactured from metallic materials or plastics. We support the mission of the advice on the drawing (CAD / CAM) to the finished product. Latest technologies, advanced manufacturing equipment and our courage to innovate guarantee the highest quality.

The area of activity is contract manufacturing and includes all processing in the areas of milling, turning, cylindrical and surface grinding High precision, flexibility and commitment to customer satisfaction are paramount

With a clear view of the future, the company plans to expand its product range and enter new markets while maintaining the high standards of quality and precision that have characterized it since its inception. The machining company innospan is therefore not only an example of successful family tradition, but also a pioneer in the industry that is ready to take on the challenges of the future. innospan GmbH is your competent partner in the area of CNC turning technology and CNC milling technology. The wide range of services includes the production of individual parts (prototypes), small series and assembly assemblies made of e.g. stainless steel, steel, aluminum, copper alloys (brass) and plastic. The production, which is equipped with modern CNC machining centers, enables a high level of precision and flexibility in meeting your requirements.