Punching and forming tools with its own tool. Production in lots of 1-100000 St. Processed materials: Steel sheet: 0.5-10mm VA-sheet: 0.5-3mm AL-sheet: 0.5-5mm MS sheet: 0.5-4mm, Cu sheet: 0.5-4mm Rod material are 15mm thick and 6m Length max. Tool dimensions: 900 mm max. Press force: 2500 KN Tube processing to D 200mm Deep drawn parts to D 250mm

G.Honsel Aluminium Processing GmbH Your partner for series production In addition to creating our own product lines, we specialize in solving customer-specific problems. Together with you, we develop tailor-made product solutions so that perfect results are always achieved. Our focus is on cutting-edge processing technologies such as milling, sawing, drilling and punching, which have been specially developed to meet the requirements of series production. We know that reliability and consistency are key to producing high-quality aluminum products on a larger scale. Our customers not only appreciate our down-to-earth approach, but above all our reliability and quality. Satisfied customers from various areas such as window construction, façade construction, noise protection and solar speak for our expertise. We do everything we can to provide you with precise and lucrative solutions that exceed your expectations.

C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.

We produce modern stamping and bending machines Flat springs, hinge springs Contact springs, locking and clamping springs Here we can draw on a century-long experience that you also can use for your problems and questions. Our own tool provides the flexibility of our production facilities. We guarantee a consistently high quality of our products with a careful manufacturing and final inspection by individual testing equipment. Regular undertaken by the customer product audits and supplier assessments have repeatedly confirmed the high level of quality and delivery reliability. Our clients include major companies in the automotive, lighting and electrical industry as well as the furniture fitting and camping industry at home and abroad. We manufacture the following materials: - Stainless spring steels 1.4310, 1.4301, 1.4568 according to DIN EN 10151 - Phosphor bronze strip Cu Sn 6 according to DIN EN 1654 - Beryllium copper Cu loading according to DIN EN 1654 - Brass band Cu Zn 37 according to DIN EN 1652 - Aluminium AL MG SI according to DIN EN 485-4 - Surface band (egB. silver plated) - Spring steels grade C 60 S, C 75 S according to DIN EN 10132-4 - Spring steel round wire rolled grade C 35, C 45 according to DIN EN 10016-2 Execution: Thickness: 0.10 to 3.50 mm Width: 1.00 to 80.00 mm Edges: cut or rounded off. On request we can with renowned Lohnveredelern surface treatments each Make way.

RUDA-Metall GmbH The company RUDA-Metall GmbH was founded in 1982 and has its manufacturing focus in the area of technical stampings. Here components for the automotive industry and its suppliers and the electrical industry are manufactured for years. The modernized about 2 years ago vibratory finishing system, we can achieve the best results even for your parts. The tools are designed and manufactured in our own modern tooling. In 1994, with the company K.Fr. Brahm, consisting since 1868, a group of companies founded. The K.Fr. Brahm manufactures focus: furniture fittings, hinges, stampings for light domes, scaffolding, electrical parts, office furniture and fittings for the mirror industry. In order to work more efficiently and more cost effective for your customers in the future, the K.Fr. was Brahm 1-1-2006 integrated GmbH in the company RUDA metal. Our Lord Dannhorn (Dip.Ing. Engineering FH and Dipl. Economics FH), as well as our technicians and master craftsmen to support you in the optimal and cheapest design your parts.

RUPF INDUSTRIES: Synergien einer starken Gruppe Die RUPF INDUSTRIES GmbH, eine mittelständische, familiengeführte Unternehmensgruppe mit Ursprüngen bis in das Jahr 1859, hat sich als international tätiger Akteur in den Geschäftsfeldern Fahrzeugtechnik, Hydraulik und Maschinenbau etabliert. Mit rund 900 hochqualifizierten Mitarbeitern an 10 Standorten (Deutschland, Osteuropa & Asien) erzielte die Gruppe im Jahr 2024 einen konsolidierten Umsatz von ca. 170 Millionen Euro. Heute ist die RUPF Gruppe stolz auf ihre Partnerschaften mit führenden OEMs und Tier-1-Zulieferern. Die RUPF INDUSTRIES GmbH verdeutlicht mit ihrer Unternehmensstruktur und den spezialisierten Tochtergesellschaften, das durch gezielte Synergien innerhalb einer starken Gruppe innovative und qualitativ hochwertige Lösungen für anspruchsvolle Kunden weltweit realisiert werden können. xing.com rupf-industries.com

We are your system partner for assemblies with components from our plastic injection shop and our stamping shop. We have a great deal of vertical integration at our location in Weinstadt near Stuttgart. Our production is optimally designed for quantities of 1 to approx. 800,000 pieces/year. We are also happy to integrate processing processes and components from our or your partners into the value stream in a process-reliable and economical way. Based on a proven approach, we offer you innovative solutions from a single source.

Since 1991, Torgelower Metallwaren GmbH has stood for quality and know-how in the field of metal processing and tool making. Based in the heart of Western Pomerania, we were able to utilize the region's underestimated potential and develop into an internationally active company. We offer our industrial customers from all over the world the highest standards in the fields of CNC punching, conventional punching, welding in all common processes, CNC milling, steel construction and product packaging. As a certified company, we were able to convince clients from the automotive industry, environmental technology, construction, apparatus engineering and electrical engineering of our quality work with punctuality and maximum precision and have been counting them among our satisfied customer base ever since. In addition to modern technology and equipment, the qualification and commitment of our employees are a central part of our company policy. The highly motivated engineers, foremen and skilled workers work as a team to meet the high demands of our customers. We ensure 100% quality of our products through targeted personnel development and consistent quality management. We offer them individual, project-oriented advice through to technical implementation. In line with your requirements, we provide you with holistic products with maximum production accuracy and consistent quality. The continuous expansion of our product range requires continuous modernization of the company's own machinery and production areas. By expanding our storage system into a modern high-bay warehouse, we can store the appropriate materials, semi-finished products and finished products on 460 pallet spaces and thus respond flexibly to our customer requirements. We responded to the increasing demands of our foundry customers with the inauguration of our steel building in 2009. The new production area of 1,200 square meters and the corresponding equipment enable us to produce and process components weighing up to 20 tons. This makes us one of the few companies in the region that can produce in these dimensions. With passion for our work and many years of experience, we take on any task in the metal sector.

Our company was founded in 1950 by Karl and Georg Hermann. The quality-oriented tooling was gradually expanded three times in total and 1967, supplemented by an in-house fabrication shop. In the course of further expansion, the entire company moved in January 2003 in the newly built production halls in the local industrial area. Since 1998, the independent company led by Karl Hermann and his granddaughter Michaela Bator subject. A healthy mix of traditional wealth of experience and youthful commitment is thus the result and constantly leads to new innovations. A continuing high priority are our well-trained and experienced staff who are specialized in dealing with new technologies to date. This helps us to provide Quality Policy and Objectives Take mitzutragen. Customer focus, professionalism and quality for many years form the basis of our success. Talk to us when it comes to meet extreme demands on product quality, cost and on time. We look forward to advise you in detail and professionally with our know-how. K. & G. Hermann - your partner in terms of reliability and quality. The tooling In this sector, our long and diverse experience are introduced. Through constant innovation in product, it is possible to respond quickly to customer needs us.During and after the stress of these tools are kept under review and, if necessary, repaired immediately. So with us is a constant monitoring and maintenance of your tools of course. Specifications: * Manufacture of cutting, punching, stamping and embossing tools and composite tools * Maximum tool length: 500 mm Facilities: * CNC milling machines from DMG and Hermle * Sinking EDM Charmilles * Wire EDM machine of Charmilles * Surface grinding of ABA * Lathes * Meßprojektor The stamping Our extensive international customer base includes companies in the automotive, electrical and watch industry, and manufacturers of household appliances and surgical instruments. The stamping itself consists of several brands of eccentric Schuler, Weingarten,

The company BOTT tool and machine is a 1979 founded company that operates in the field of design, manufacture and installation in many areas such as: Material removing machining of metals and plastics by turning, milling, grinding and eroding in the field of precision tooling and engineering. Design and manufacture of various special machines according to customer's requirement Hoppers for the conveying of dry, powdery and granular bulk materials. A-and / or multi-component scales with the highest weighing accuracy for laboratory accuracy weighing of powder, granular and liquid goods. Besides a modern machine park there are particular our qualified and highly motivated staff, produce the highest quality. Our team currently consists of 25 professionals in manufacturing, as well as 5 employees in the management and construction. A high level of flexibility, our team can adjust quickly to new tasks.

We master the entire metalworking value chain, from development to in-house prototyping to series production. In doing so, we combine customer proximity and partnership with know-how, experience and innovative strength. Our strength lies in the combination of engineering expertise, precise prototyping and high-quality series production.

MARKC, Miha Mlakar s.p. is a Slovenian tooling company specializing in the development and production of high-quality stamping tools, jigs, and low to mid-volume metal parts. Founded in 2022, we quickly evolved from project management into full in-house manufacturing. Our capabilities include progressive, transfer, manual, deep drawing, and prototype tooling. We support customers from initial 3D models and engineering (including simulations and CAD design) to machining, assembly, tryouts, and final implementation into serial production lines. Our in-house equipment includes CNC milling (HAAS, TRIMILL), Wire EDM, grinding, and hydraulic press systems (tool sizes up to 1100 mm). We also collaborate closely with trusted local partners for services such as 5-axis machining, laser cutting, thermal processing, and CMM measuring. We aim to continuously grow our production capacity, with plans to expand machinery, introduce 2D laser cutting, and enlarge our production area by 2027. Located in Stari trg pri Ložu, Slovenia, MARKC is committed to precision, flexibility, and long-term partnerships.

For over 30 years we manufacture cutting tools, fixtures and general machine components at the highest level. Our customers from all sectors of industry value us by a reliable partner. Qualified and motivated employees, modern machinery and using the latest CAD / CAM and manufacturing technologies facilitate on-time and high-precision production of your tools. We are your specialist when it turn around, milling, wire cutting and grinding it.

Versatile and varied ... is our world with sheet metal! A flexible manufacturing spectrum to meet the needs of our customers is the driving force of our company. Builds on the fixed rate for 60 years, a number of well-known customers. Our clients rightly trust in our experience and our know-how. They appreciate the constructive cooperation as well as the passion for performance and quality. "Presses, punching, pulling" here in Burgbernheim our daily success factors. "Precision, economy and time" are the obvious constants for series production and assemblies. Our manufacturing capabilities include pressing, stamping, drawing and stamping parts and CNC punching, laser cutting and bending. Further processing, such as welding, electroplating, Powder coating, etc. are of course also to our possibilities

In our family business, we produce tools for the automotive industry and are therefore familiar with high precision even as a contract manufacturer. Thanks to 30 years of design experience, order drawings are clearly legible for us. Customer satisfaction is our motivation.

Hightech from Venice You have a product idea ... .. we support you in realizing your components. Veneta Stampi Srl is a specialist in the cold working of sheet metal and the experience we have gained since 1971, combined with the latest 3D technologies, enables us to manufacture tools and components for a wide variety of industries. We offer all common metalworking processes from a single tool, from stamping and forming technology to deep-drawing technology. We guarantee optimal quality and delivery for almost every form of metal processing. Our complete service from construction to final assembly allows us to offer you a complete guarantee of quality and flexibility. Founded in 1971 by Vittorio Furlan, Veneta Stampi Srl has developed into a renowned medium-sized family company with around 50 employees.

PMP Meccanica is a company headquartered in Lippo di Calderara in the province of Bologna, which was founded in 1961 starting to stamp sheet metal. With years the experience increases and to reduce the time of delivery and external machining PMP Meccanica starts to gear up internally for the production of molds refining the quality. Gradually this part of tooling evolves allowing also the production for other customers expanding its scope to pieces for multiple sectors such as aeronautical, medical, packaging, and sintering powders. Today, thanks to a cutting-edge machinery and capable staff, PMP Mechanics is a leader in the field of precision mechanics and in the normal and semi-fine blanking. Currently PMP Meccanica employs 50 people of which 30 are engaged in the tooling branch and 20 in the blanking. The mantra and backbone of PMP Mechanics has been always the thought of the founder Marziano Pancaldi ie "We can build all that we can measure." It is therefore evident the necessity to have a constant quality control during the whole production process to ensure the quality of the product and the tolerances required by the Customer.

Mario Fernando Group s.r.l. is an Italian company specialized in the cold deformation of metal sheet, in particular of stainless steel and aluminium. with over 55 years of experience in the planning and construction of high quality dies our aim is to become a model for the processing of metal sheet. We can realize dies for drawing, deep drawing, bending, trimming and blanking, according to the customer's drawing. Mario Fernando Group s.r.l. offers the mass production of metal stamped parts: the dies are realized according to our customers drawings and the production managed to meet the customer’s requirements. Our company proposes innovative solutions to the most complex technical problems becoming partner of our customer for the whole process of transforming an idea into a mass production work, even with the design of special machines according to our customers’ production needs, to give support that goes beyond the tool realization. This is what we mean with partnership. Our company is ISO 9001:2015 and and IATF 16949:2016 certified.

What we offer We are professionalized in job shop manufacturing and sourcing simple stampings to complex assemblies, as well as in the production of simple and complex punching tools. As we attach great importance to "Swiss made", all work processes in domestic be made, either directly from us or from selected partner companies.