U. Eitner Tooling, EDM & Plastic GmbH Benzstr. 7 D-64807 Dieburg Ask us! For over 25 years we have manufactured to approximately 1500m ² and bearings on 1000m ² Tool and die All equipment needed for tool available eg Senk - and Wire EDM. Max 3T tool Total weight approx 25 Tools / year Engineering and CNC machining 4 CNC lathes and machining centers 4 Milling: Max X1800 - Y750 - Z750, 3, 4 and 5 axes. Rotate: Max diameter 800mm Plastic injection molding 10 Arburg injection molding machines, max. 150T, fully automated. Automotive, electrical and thermal engineering about 30 million plastic parts parts per year.

Keurhorst Metalworking was founded in 2015 by Michiel Keurhorst, an experienced metalworker, who has mastered the profession from practice after years of experience in the world of machining. As a company, we mainly focus on complex 3D milling, but whether it is workpieces of Steel, stainless steel, aluminum, titanium or plastic, we always aim for the best results and are satisfied with nothing less. Furthermore, we are pre-eminently the address when it comes to high-end fine mechanical parts for, among other things, injection molds. In order to achieve this, we have access to a beautiful Hermle milling machine, and a Bridgeport. Furthermore, we naturally work with the best (measuring) tools, in a fully air-conditioned workshop. In addition, we can sometimes offer something extra with our Radial drilling machine, and a 3D printer. We are a young and dynamic company that does not shy away from challenges and where perfection is of paramount importance. Need something that requires high accuracy? Look no further .. and work with Keurhorst Metalworking.

How can we help you? That's our way to say we are here for you to serve you as customer. Lentink founded in 1958 has grown into one of the leading suppliers in the field of high tech sheet metal. Deep drawing, pressing with transfers and progressive tools are our daily business. We deliver on daily base to our customers and we have to take care for more than 10.000 articles around Europe. With or without powdercoating and as simple parts and assemblies. Quality and reliability are our daily goals with our people. With over 60 years of experience, we manufacture large and small products in small and large series for different markets, sectors and industries in Europe. Companies like Bosch, Vaillant, Brötje and Buderus have also find their way to our company. This is facilitated by a wide equipped machine park consisting of-the-art technologies as well as by the daily commitment of more than 125 enthousiastic technical specialists. Processing of steel parts with many features and Lentink would like to advise you about your products as well. If you want to know more about sheetsteel possibilities; please feel free to contact us. Ronald Pool tel: 0031-611780352 WWW.LENTINK.NL Tel: 0031-315382130

The company Basement mold manufacturing is a high quality operation, tool and supply company, we characterized the precision, reliability, and low cost manufacturing from. Reliability and speed extra special in the wire and sinker EDM but also "NEW" in CNC 2-3D / to 5Achsensimultan milling are our strengths. We are a top supplier for renowned customers. Injection molds, stamping and bending tools and their spare parts, precision parts As well as our own developed product: Clamping systems for wire EDM machines possible with very good Oualität, individual designs, affordable clamping systems for your needs.

About us Having the ability to design and manufacture special-purpose machinery, attachments and equipment, GSB provides services in the fields of Foreign Trade, Energy and Defense Industry in accordance with sectoral contraction and innovative adaptation requirements. Our products Excavator Rotary Screen Bucket Electro-Hydraulic Clamshell Bucket Cement Industry Air Transfer and Lifting Equipment Construction Machinery Attachments Special Design Products Agricultural Tools Concrete Batching Plants Representations and Distributorships As GSB Group, we are in active trade with the countries of Austria, Israel, India, Georgia, Azerbaijan, Russia, Libya and Iraq.

We are a young, modern company in the CNC contract manufacturing sector. Our quality standards as well as our adherence to deadlines are the top priority of our company. This is the only way we can identify with every product and every service. That is why we have set up this homepage for you so that we can inform you even better about our services. The service-oriented customer care is an essential cornerstone of our successful corporate strategy. Fulfilling your wishes is our focus. Qualified employees provide friendly and expert advice. Our extensive range of services leaves nothing to be desired. Convince yourself of our range of services and our diverse range of services in the field of CNC contract manufacturing. Our products are characterized by the highest quality and the most modern manufacturing technology. Of course we offer you all this at a fair price. Every employee has special knowledge and many years of professional experience in the field of CNC contract manufacturing. These are reflected in our products. You as a customer benefit from this, now and in the future!

Ladies and Gentlemen’s, We are a Polish producer of mechanical parts. We employ qualified engineers for the production processes and quality control. Production processes are prepared on the based of an insightful analysis of customer requirements, and own production capacity. The price offer is also a guarantee for the customer, receives a product that complies with the requirements of quality and strictly within the agreed delivery period. We produce and delivery: 1. CNC turning of metal parts with a maximum diameter of 250 mm and a length of 400 mm. - the accuracy of turning +/- 0,005mm (IT5-IT6) - obtained surface quality to Ra0,63 / Rz4 - machined materials: Stainless steel, black steel, aluminum alloys, copper alloys, plastics; 2. CNC 4-axis milling of metal parts with maximum dimensions 750x500x500 mm. -precision of milling +/- 0.01 mm (IT6)? -the resulting surface quality to Ra0,8 / Rz6,3 - machined materials: Stainless steel, black steel, aluminium alloys, copper alloys, plastics 3. We cooperate with carefully selected service providers for the following areas: - laser cutting of sheet metal - thickness up to 20mm - plasma cutting sheet metal - thickness up to 100 mm - sheet metal bending on press brakes - MIG, MAG and TIG welding - other processes related to the machining of sheet metal and welded machine parts (shot blasting, powder coating) We provide production of parts strictly according to customer requirements, by working on our own quality assurance system based on the requirements of our customers from Switzerland and Germany, consisting in: - preparation of production including a detailed analysis of the customer's requirements - careful control of acceptance materials and semi-products - systematic inspections during production and immediately corrective actions - specific selection process for material suppliers and subcontractors of additional services - careful protection of goods during delivery to the customer Best regards Eng. Karol Miaskiewicz CEO Tech-Project Tel. +48 609 425 898 Email K.Miaskiewicz@tech-project.eu

Leading Italian company in the field of design and manufacturing of injection moulds as well as development of process solutions for the automotive sector. Our specialization is in the field of complex 1K moulds as well as multicomponent injection moulds with different technologies (core back system, rotational tools, index tools, vertical rotation, transfer tools - pick and place - and coreside lateral shift). With our 2K and 3K injection moulds we can also supply auxiliary injection units for the production of multicomponent parts by using a conventional 1K injection machine. Our injection moulds are applied both in the interior as well as in the exterior of the car. Our product portfolio is completed with the supply of a diverse range of industrial automations, such as end-of-arm grippers, machines for sprue cutting, cartesian robots, equipment for quality control, pressure check and assembly, robotized cells, equipment for film wrapping, gauges, laser cutting stations and others. Our purpose is to be a system supplier for turn-key solutions to our customers.

Since 1972 specialist in injection moulding of high precision plastic technical parts Starting from a little workshop, Rosà Plast is today a solid family company at the second generation, specialized in injection moulding, ready for the future challenges and to assure high precision and reliability in the production of plastic parts. Rosà Plast is located in North-East of Italy , 80 km from Venice area. 42 injection moulding machines of best trademarks, controlled by a full computerized production process and a systematic quality control assured by ISO 9001:2015 and UL QMMY2 certifications of third party. Rosà Plast supports the customer from initial phases of project and co-design , gets the most efficient solution starting from specific requests and solves problems related to existing tools thanks to a individual analysis .

Our company was established in 1997, in the field of metal processing. Since then, it adopts a quality agreement that has successfully delivered hundreds of thousands of parts for testing. It has closely teamed up with the developing metal processing technologies and made the necessary investments. It has produced precision equipment such as engine parts, machine parts, molds and fixtures directly for many main industrial enterprises. Our main references are; -Iveco Motor Company (ITALY) -Toyota Factory (Türkiye) -AISIN A.Ş (Türkiye) -Basak Traktor A.Ş (Türkiye) -DEMİSAŞ (Türkiye) -Turk Traktor AS. (Türkiye)

We are an owner-managed, medium-sized company in the tool and mold making sector. The family business has been based in the Höxter district in East Westphalia since 1961 - in the three-country corner: North Rhine-Westphalia, Hesse and Lower Saxony. Our many years of experience in the field of tool design and production make us - a team of young and dynamic employees - a competent partner for our customers. Cooperation and Innovation: The employees are the most important element in our endeavors to look after customers at a high level, to develop and implement solutions. Personal interaction and cooperation are characterized by appreciation, recognition, team spirit and mutual respect. Communication is open and constructive. Every employee feels responsible for the entire company and is called upon to make innovative suggestions for improvement to ensure that the existing procedures and processes are optimal. So everyone contributes to the overall success of the company.

Lohmann Werkzeugbau GmbH & Co. KG is a future-oriented, medium-sized company and was founded in 1991. With over 20 years of experience, we have extensive know-how in the technology of tool and mold making. Our focus is on plastic injection molding, hydroforming, cutting, and prototype construction. Our extensive and state-of-the-art technology and machine park enables our team of over 20 employees to solve tasks quickly and in the best quality. We have been known for this since the company was founded. Our customers are located in the automotive, food, packaging and general consumer goods industries, among others

TREVISOSTAMPI is a mechanical workshop of about ten employees who designs, builds and tests injection molds particularly in the automotive sector. In addition to the usual mold construction activity, TREVISOSTAMPI is always more offering mechanical milling / drilling processes of steel, aluminum and cast iron too.

SCAMM Srl and MOLLIS srl supply service and equipment for metal sheet deformation and assembling. MOLLIS produce parts and assembled component made in metal sheet. SCAMM supply dies, hydraulic press and complete process line for metal sheet deformation

High tech injection molding tool manufacturer 4 to 60 tons of tools

Product Development / Construction Area Plastics Components / Assemblies / Medical / Vehicle / Building Technology Construction and construction of small series - and prototypes tools / jigs / gauges Patterning / production of thermoplastic components / injection molding Research and development on shape - memory drives / switching elements / sensors

Originally founded as Micropressofusioni in 1979, Zama Solutions is now a company highly specialized in the die casting of zinc alloy technical components ranging from 0.5 to 1000 grams in weight, using presses with closing forces from 5 to 200 tons. Over these years, we have gained extensive experience thanks to the production of several million components used across many sectors. At Zama Solutions, we daily produce castings that are used in the manufacturing of: - Aesthetic and functional accessories for fixtures - Mechanical components for the electronics industry - Lock components, both for the construction and automotive sectors - Automotive components for active protection systems - Junction elements for structures made of aluminum profiles - Components and accessories for zippers - Components for stationery - Elements for furniture - Components for small automatic machines - Gears and toothed pulleys - Connectors - Heat sinks - Components for the appliance industry - Valve elements - Systems for office machines - Hinges and joints - Components for leisure and recreation We currently have 699 molds active that can produce 1241 different types of components, with production runs ranging from a few hundred to several hundred thousand pieces. The quality that is most recognized by the majority of companies turning to Zama Solutions is our extreme flexibility in constantly customizing the service according to their needs. Furthermore, the production department is continuously supported by the tooling and engineering department for the design, construction, and maintenance of the molds for zinc alloy die casting. This is of fundamental importance, as any issues encountered during production are resolved in very short times, sometimes directly on the press itself. The potential of zinc alloy is vast, and you too can benefit from it. That's why we have prepared a document available for free download, where we explain how you can take advantage of using zinc alloy as material for your components. You can download it directly from our blog at www.zamasolutions.it If you have any questions and want to learn more, I invite you to contact us, so we can examine your case and understand how we can help you. Go to the contact page and fill out the form in detail in all its parts.

HEAVY - It's EASY for us! Pro-Moulding has over 30 years of experience in the field of plastic injection molding and has been characterized by precision, quality awareness and speed from the very beginning. Our high quality infrastructure guarantees a full service from mold and product development to serial production and numerous services. Through the motto "hard comes easy to us " the company has developed as a relevant partner mainly in Austria, Germany and Hungary. With an ultra-modern machine park in the high tonnage range, even the largest components can be easily implemented. We supply well-known equipment and component manufacturers in the outdoor, industrial, office furniture, medical technology and automotive sectors. Pro-Moulding employs about 100 people and is a company with a very solid financial background. With our modern machinery we are specialized in the production of large volume plastic parts. Our employees and the consistent implementation of the motto 'hard comes easy to us' are the success components for high customer satisfaction and growth. We process common engineering plastics such as ABS, POM, PA6.6, PPS, PBT, PP, PMMA and many other materials on 10 modern robot-controlled ENGEL machines with clamping forces from 88 kN to 2300 kN and shot weights bigger than 10.000 g. Our unrestricted goal as a company (team) is to be an A-supplier for each of our customers and thus a partner. To meet this claim, the continuous improvement of our processes (CIP) as well as the regular auditing of our quality management according to DIN EN ISO 9001:2015 is a matter of course for us. Our quality claim starts with the preparation, is accompanied by regular and random checks, internal and external audits and is ultimately supported by the high motivation of our employees. Certified according to EN ISO 9001:2015 and EN ISO 14001:2015 A direct contact person, supported by digital processing and confidentiality agreements, is part of a successful cooperation.

Located in Viganò (Lecco), 40 Km from Milan (Italy)over an area of 5,600 square meters , Zeta Stampi srl has been designing, building moulds and injection-moulding plastic material for third parties for over twenty years. We also manage post-molding processes such as painting, metallization, chrome plating, pad printing and screen printing. We have an updated workshop with numerical control machines, CAD / CAM softwars,No 14 injection molding machines from 60 to 900 tons, measuring room and ISO 9001-2015 certification. Our main fields include automotive, electronics, appliances,household appliances, garden machines, furnishings, advertising technology, household items; layette and the cosmetic industry. In any case, we have skills and adequate structures to manufacture products for other sectors. Get in touch with us so we can help you with your projects, in terms of costs, quality and delivery times