The company Officina Meccanica Bruegger srl (OMB) is situated in Como, a strategic point between Milan and Switzerland. For two generations OMB is specialized in the production of high-precision mechanical parts. Thanks to the continuous development in the production and engineering OMB has a complete and modern production and offers a complete service: Our services: • Design and Engineering of new high-precision mechanical parts. • Realising of prototypes and samples • Production of series • Different surface finishing’s of the parts • Assembling according to customers specifications • Testing according to customers specifications In the Engineering we use following Cad/Cam Systems: ProE, Soldi Works, Rhino, Sum3D und Pacw. The drawing can be sent in following files: dxf, dwg or iges. In the production we use metal and plastic materials as for example: METAL • iron • stainless steel • brass • cupper • aluminium • Hastalloy • Monel • Other alloys PLASTIC • PVC • POM • PP • TEFLON • PEEK • VESPL • PC • PA • Plexiglas • Reinforced and not reinforced plastic materials Of course we organise almost all surface finishing’s on request: HEAT TREATMENT • Hardening • Cementation • Nitriding SURFACE TREATMENT • Anodizing natural and coloured • Hard anodizing • Galvanizing • Chromium plated • Alodine • Nickel plated, electrolytical and chemical

Technical Trading Dreh-/Fräs-und for sheet metal parts

In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches. Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger. In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall. The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern. In 2000, the certification according to DIN EN ISO 9002 was carried out. As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the Hohenlohe precision parts GmbH. Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners. The reward for good quality and very little complaints are our satisfied customers.

Metech Zella-Mehlis GmbH has many years of experience in manufacturing, which is based on diverse customer and supplier relationships. As a family company whose roots go back to 1941, we established ourselves as an independent company in 2013 and are proud to be able to pass on our extensive know-how and expertise in the field of metal processing to our customers.

STL-Technik company offers services in CNC machining, programming, 2D and 3D documentation, technical consulting, technological support and tool selection. High quality of our services is guaranteed by many years of experience in CNC machining, programming of CNC machining machines, fixture construction and metrology. We manufacture parts based on the documentation provided to us. Our goal is to meet all the requirements of the customer, deliver on time and provide services of the highest quality at a reasonable price. With our flexibility we are able to meet various expectations of our customers. We constantly improve quality of our products and services. We are looking forward to cooperation with you!

The company TIGEMMA, spol. s.r.o. has been active in the engineering sector since the early 1990s. It is primarily engaged in manufacturing machine parts and providing engineering services. Its own manufacturing program is focused on the area of industrial filtration, exhaust systems and material extraction tables for CNC cutting machines. In addition, we offer products and services in the field of processing refined materials such as aluminum alloys and stainless steel. These products are delivered in superior quality finishes thanks to producing them with modern, sophisticated technologies. A comprehensive manufacturing park makes it possible to ensure the manufacturing process, from shape cutting, bending, blasting, and painting the material to road transport, is integrated. MAIN MANUFACTURING PROGRAM • FILTER AND EXHAUST EQUIPMENT • MATERIAL EXTRACTION TABLES FOR THE THERMAL CUTTING OF METALS • SUCTION TABLES FOR WELDING • FANS • PRESSURE VESSELS • STEEL STRUCTURES • SOUNDPROOFING HOUSING FOR ELECTRIC GENERATORS AND PUMPING EQUIPMENT • FOOD INDUSTRY EQUIPMENT • AUTOMOTIVE INDUSTRY EQUIPMENT • TEXTILE INDUSTRY EQUIPMENT • MINERAL PROCESSING INDUSTRY EQUIPMENT

The Binder GmbH conveyor system is a flexible family business, designed and implemented since 1971 with innovative ideas individual solutions. The company offers the entire range of services to modern materials handling and care of you even after commissioning of the plant. The service starts with the design, via design, manufacture and installation of complete production facilities to production of special machines and training the customer's employees. Furthermore, the Binder also performs the expansion and modernization of your existing system. The approximately 60 employees / inside are all experts in their field. Because of the efficient structure within the company, we are able to react flexibly to your requirements and to achieve best quality at high delivery reliability. For optimal order processing. Furthermore, we do contract manufacturing in the field of welding, Machining and turned parts. For solutions on the move.

Wissmatec S.R.L. a company of German origin and more than 25 years of experience in the manufacturing of metal components, Plant and special engineering. 130 employees in different production areas produce on modern Machinery and equipment. ● storage and transport • carrier • steel pallets • transport boxes • storage boxes ● deployment cart • Order picking carrier • Trolley • trailer ● Container • Tanks ● Loading and unloading systems • Conveyors • Screw Conveyors • discharge systems ● Metalworking • Sheet metal working • Baugruppenfertigung ● steel structures • welded constructions ● toolmaking • fixture construction ● Design constructions in steel ● Custom

The company Jerg - Feinmechanik- Werkzeugbau was founded in 1950 in Überlingen on Lake Constance. With our 3 employees at the Überlingen location, we mainly produce turned and milled parts. Together with our partners, we can offer our customers the entire range of metalworking services, so our customers get everything from a single source. Of course, we also support our customers with the construction and skilfully use our many years of experience. Even the most common types of surface refinement are feasible for us. We always work according to the highest quality requirements of our customers and it is also very important to us that our customers communicate with us as equals. - together a lot more - Try us... you won't regret it!!!

The Kolb, washer and Diekhaus GbR is a sheet metal manufacturing and manufacturing company based in West Saxony. The development and production of stainless steel mailboxes attention in recent years as far as possible in Vodergrund. Since October 2014, the contract manufacturing has been built in the areas of lasers, flashings and mechanical processing in the branch office Grimsby. We are now in a position the entire process chain of sheet metal processing to offer to powder coating of large parts. We look forward to a mutual cooperation

We are a system supplier to the automotive and metal industry and have 25 years of experience in the production of series, in prototype and tool construction. We manufacture structural components, assemblies and prototypes for motorsport, for special vehicles and vehicles from the premium segment and for the metal industry. We process high-strength and ultra-high-strength steels, aluminum and plastics in order to meet the increasing requirements in automotive engineering. State-of-the-art processes such as 3D laser cutting, 3D printing, and processes from metal forming and CNC machining are used in our production. Feasibility studies, method planning and production - everything from a single source. Under this heading, we manufacture single, progressive and transfer tools for fine and thick sheet metal structural components for the automotive and metal industry.

We manufacture for you in the areas of sawing, turning, milling, drilling, grinding, gear cutting and grooving. In all areas we have experienced employees who have been loyal to us since the company was founded. In order to preserve and pass on this experience, we regularly train successfully. Big and small, we can do both. Regardless of whether it is a small turned part or a large welded construction, we will manufacture it for you. Thanks to our wide range of machines, we have a high level of vertical integration, which enables us to offer our customers a wide range of components.

The Zehnle machining is a company that manufactures the machinery and automotive, as well as parts for rail vehicles and the automotive industry since 1990 Präzisisonsdreh and milled parts. Be edited in addition to steel, stainless steel and aluminum and non-ferrous metals and various plastics. Our Services: - Turn - Milling - Sawing - Measure

Our company is located south of Budapest, in Pest County, in an industrially and economically strategic area. The high demands arising in custom or mass production are guaranteed by our company's many years of experience and in-depth knowledge of modern technology that supports processing. Our team consists of highly skilled professionals, and we carry out our work in an organized manner, meeting deadlines, at competitive prices, and in compliance with quality standards.

founded in 2011 in 2015 we built a new machining shop → Milling / Turning / Welding / Flat Grinding / EDM / Injection Molding / Laser Engraving Raw materials: Aluminium, regular grade steel, stainless steels, tool steels, ductile iron, plastics well accessible possibilities of surface treatments (elox, phoshpat, browning, zinc, nickel, powder coating etc.) and heat treatments customers - machine tool manufacturers, packing and textile industry, automation, special machinery, railway, aviation and others) additional activities: development and manufacturing of professional working benches (SMW Workbenches) with accessories (e.g. tapping devices) Engineering - special purpose machines, Special clamping jigs, fixtures mold making, plastic injection molding capacities available we are - flexible and competent team with international experiences we speak german / english / russian / czech we offer - long-term, stable and fair partnership

VZ Industries is a leading manufacturer of steel-related products and components in the office machine, automotive and kiosk branch. VZ Industries has grown from a small family company in 1959 to the professional system supplier it is today. VZ Industries can handle the complete process of design, proto-typing, production and logistics for your product. The development department provides 3-D CAD/CAM capabilities to ensure customized solutions with cost-effective production. Prototyping, production and logistics are always adapted to the customer's needs. VZ Industries highly automated production facility consists of modern machine technology and a flexible and motivated team of technical specialists. Reliable shipment, quality that exceeds market standards, short communication lines and competitive pricing are the foundation for the long-lasting relationship between VZ Industries and its customers.

About us With our industry expertise, we can help you successfully and promptly implement your production project for mechanical components, assemblies, and housings for small to medium-sized series. For more than 20 years, we have been experts in die casting, injection molding, and other mechanical processes. Our focus is on cross-process thinking. In Germany, Europe and Asia (in-house certified production) we manufacture your mechanical components, assemblies or housings. Our manufacturing services include: Engineering: Technology consulting (wide range of materials and manufacturing processes); CAD evaluation, construction & development Prototyping (close to series production; 1,-3,000 pieces) for die casting, injection molding, precision casting, sand casting, PA casting, vacuum casting, CNC milling, SLS & SLY Series production for batch sizes of up to 25,000 units Metal: aluminum die casting, zinc die casting, deep drawing, gravity die casting, sand casting Plastics: injection molding, thermoforming, extrusion Our Services: Project-related surface finish Coordination of the entire production project Advice along the value chain Assembly service, measurement reports International logistics service

Sheet Metal Manufacturing

TecnoVN located in Lugagnano di Sona in the province of Verona, presents itself as an excellent partner for companies that need a complete service, from machining to the complete supply of mechanical constructions made by particular achieved in turning, milling, laser cutting, carpentry and final assembly. TecnoVN is a company made up of qualified people for years in the field of mechanical production; there are multiple experiences in the construction of components and equipment for handling, hydro-pneumatic, bodies and attachments for diamond tools, machines for processing of marble, agricultural machinery, equipment for lifting suction cup, machines in the food industry (beverage and bottling - bakery - canning - olive oil and milk - purification and sanitation - Handling and Storage - packaging and labeling - components and automation) and everything that includes the production of small / medium / large batches of mechanical parts in steel, stainless steel, aluminum, plastics and special. Our flexibility allows us to adapt to any production needs of the client to provide a personalized service. Considering the trend of the market, TecnoVN is equipped to provide estimates on request in a very short time and this permits to speed up all the management operations between the parties with the result of a greater competitiveness both by the customer and also the supplier of the raw material.