Our production concerns all kinds of tube working (automatic cutting, bending),all the mechanic working made with tools (shearing,drilling,deep-drawing,shaping,etc…), tapering till a diameter of max.80 cm., swaging till a maximum of 80 cm, , tig-mig-robotic welding, braze welding, FORMING, then surface finishing like buffing, chromium plating,varnishing on stainless steel,passivations,brightening, etc. Our company was born in 1995 with the target of manifacturing tools to make tubes; during these years we have increased our experience and we could solve many problems related to this field. We have recently improved our abilities to provide our customers not only with the tools they need to produce a certain article but also with the final product or a part of it,giving a whole range of productive capacity. We are offering: - Flange bending, profile bending - pipe bending, tube bending - pipe Tapering, tube tapering - pipe Forming, tube forming - pipe welding, tube welding - pipe tapering, tube tapering - pipe forming, tube forming

The Holzapfel Group specializes in surface finishing. As a reliable supplier to the automotive and manufacturing industries, we offer mainly corrosion-protective, decorative, organic and functional method for surface coating. The focus is on parts of medium and large series. In particular, in the decorative field, however, we also have a factory area for special requirements. Is coated in modern rack and barrel systems, with particular focus on lean, resource and environment friendly processes. To our owner-managed, medium-sized group also Dekotec in meaning and Holzapfel Coating Westerburg GmbH (HCW) include in addition to the crab apple Metallveredelung GmbH in meaning and Herborner metal finishing in Herborn-Seelbach in Westerburg with a total of approximately 450 dedicated employees. Our wide range of products ranging from electrolytic coatings such as Zn, Zn-Ni, Cu-Ni-Cr, Ag (technical silver, nickel silver) and Sn on electrolytic conversion / Anodic oxidation (anodizing) and Organic Coating Solutions as KTL and powder coatings to chemical deposition method (electroless nickel) and for the chemical treatment, suchB. impregnation (such as from sintered metals) or passivation / chromating and much more. The range of parts is very complex according to the different surfaces: from components from the engine compartment, brake and magnetic systems, chassis parts or housing in the lock area to sintered workpieces and many articles in the fields of electrical engineering (Great contacts, connectors), precision engineering and optical industry and the consumer industry . We include many well-known companies such as TRW, ZF and Bosch and their suppliers to our long-term, satisfied customers. The Holzapfel Group is also involved in upstream and downstream activities around the surface coating. To include as polishing or annealing / heat treatments and services such as assembly, packaging or handling all logistics processes on the capabilities of the company. Through early involvement in development processes and the close cooperation with customers, we develop customized solutions again and again. Our philosophy is qualified, customer-oriented service, from consultancy through design and construction to large-scale processing as a system supplier. With modern quality and environmental management systems, including ISO / TS 16949:2002 or the EU Eco Audit, our group is often the direct contact for new developments. We are also a member of the Trade Association Industrial Coaters Association (FIB). Our product and service range at a glance: Corrosion protective method: - Zinc-nickel · Zinc-Iron · Zinc - All procedures Chromium VI free, transparent or - Black passivated, with or without sealing Decorative process: - Copper-nickel-chromium (light and black) - Chrome mikroporig - Velournickel · Anodizing in all colors - Powder coating Functional procedure: - Electroless nickel silver · tin - Chromate or passivate aluminum - Blue pickling

Zinc die casting, plastic injection molding and punching technology are the core technologies of Roto Frank Austria GmbH. Our experience with the successful manufacture of window fittings gives us the expertise to produce your components with the highest quality. Building on this know-how, we offer you the highest quality from development to production. We are your innovative partner in product development and a guarantee for successful production in technical implementation. Team spirit, clear structures and a full understanding of your technical, scheduling and economic objectives characterize our understanding of partnership. We offer you our full support from product development to series production of your components. Experience, expertise and modern machinery give you the security of a perfect solution. As an internationally operating specialist for building fittings, we have always relied on the quality of our own innovations. Therefore, our departments, from engineering to toolmaking to production, are geared towards delivering optimal technical and economic results. Roto Frank Austria GmbH has been certified according to EN ISO 9001:2015 by DQS. The QM system supports the implementation of our company's quality policy. The quality policy serves as a binding guideline for all employees to act in a quality-conscious, customer-oriented and responsible manner. The heart of our QM system is the project process. The QM system defines the goals, processes and responsibilities company-wide. The QM system therefore forms the framework for our daily work. Continuous, systematic improvement is also integrated. The ISO standard requires the ongoing collection of information on the effectiveness of the QM system. The analysis of this information reveals potential for improvement, for which targeted measures are defined. Continuous development is achieved through internal audits and an external certification body. Certification is an important milestone on our path to continuous improvement. At the customer's request, we also work according to the VDA 6.1 guidelines. We are very familiar with the quality tools required for this, such as statistical process control or measurement system analysis.

Weinmann is primarily for quality in small and medium series. But Weinmann is also diversity. Diversity in the processing of different materials such as stainless alloys, copper, aluminum, titanium or plastic. Diversity in the ways of module assembly. Diversity in the processing options and parts Dimensions: * Large diameter up to 250 mm * Great lengths to 1000 mm * Complex geometries * Micro turned parts * Revolver and rotational parts * Frästeile A diversity that makes you much easier. Especially when * Need many different parts * Change your parts often Block * all part families * Need "outliers" or special products.

Stetorn is a young and dynamic company specializing in precision mechanical machining. Specifically, we specialize in: DESIGN Using 3D modeling software, we can design parts according to your specific requirements. MACHINING Turning, milling, laser cutting, bending, welding, assembly, and special machining upon request. HEAT & SURFACE TREATMENTS We can perform heat treatments on our parts, such as induction hardening, total hardening, and case hardening. Once the part is finished, according to the customer's specifications, we can perform cold-dip galvanizing, hot-dip galvanizing, nickel plating, and powder coating. TECHNOLOGY 3D modeling software, use of CNC machines, fiber lasers, and state-of-the-art welding machines. We stand out for: QUICK DELIVERIES On-time deliveries thanks to an efficient work organization. EXPERIENCE Although our company is young, we can boast over 20 years of experience in the mechanical machining sector thanks to the skills of our collaborators. FLEXIBILITY Ability to adapt to special requests and urgent changes. ON-GOING ASSISTANCE Technical support and consulting for every phase of the project, from design to production.

As a professional company we offer complete machining of sheet metal, from single parts to large-scale Our high-tech manufacturing facilities in combination with the expertise of our employees lay the foundation for quality, short delivery times and competitive prices. We are a supplier of sheet metal design, cabinet, control panels, pipes, etc. from normal, stainless steels and non-ferrous metals. With our advanced machinery and optimized processes in the sheet metal process chain, from design to programming to manufacturing and quality assurance, we create high-quality parts and semi-finished products. Precise, fully automatic laser cutting, punching and laser technology combined with forming, CNC sheet metal processing centers and modern brakes document the advanced technological level. With each new item of work and Einrichtpläne are created and designed so that during the production at each operation takes place a quality control by the competent skilled workers. Once created, programs are stored on request and are thus available for follow-up orders in direct access. Additions and other changes are quick and inexpensive to perform.

Targeted product presentation is the basis for successful sales promotion! Sales promotion knows no boundaries. Dude works throughout Europe. For a variety of clients. For the different markets. And for the most diverse requirements. Experience, innovation and strict customer orientation are also internationally solve the guarantee of first-class sales promotion products, the individual tasks individually. With goods carriers of various kinds to Dude sees itself as a competent partner for trade and industry. For a variety of backplane systems such as grids, slat, perforated panels and piping systems are extensive opportunities of sales promotion goods carriers available - and the stock. In addition, dude developed in close communication with its partners continuously new elements of your sales promotion. Each employee Dude is your personal sales promoters. Dude thinks.Hand in hand Your Dude contact works together in the planning and production of our shelves with you. It provides comprehensive advice and provides the impetus for innovative and successful product presentations, which ensures contrasting with the competition promotion. Good sales promotion ideas, we implement consistently. Unconventional tasks we take on as a challenge. Sales, planning and production are at dude in constant dialogue with each other. So your goods carrier arise uncomplicated, non-bureaucratic and directly. Only by first-class technology is successful promotion conceivable! Whether large numbers, or individual small series: Dude uses cutting edge technology to their advantage. Our well-equipped tooling, sophisticated manufacturing and own surface finishing production lines guarantee your goods without intermediate steps. Complete with dude made.With us, you get everything from one source - quickly. Just typical dude! Our overall performance ensures the efficiency of your sales promotion. In Dude, the whole is more than the sum of its parts. Through a customer-oriented way of working, persistent and purposeful exchange of information between our employees and the entire production under one roof we manufacture your products marketable equitable, timely, high quality, yet inexpensive. Our goods carriers are a unique feature of your entire sales promotion.

Deharde-Maschinenbau H. Hoffmann GmbH is a soundly established company in the metalworking industry with a workforce of over 150. The production of jigs and fixtures - as well as the construction of sophisticated high speed and low speed wind tunnel models - represents our particular fields of specialisation as contract manufacturers. Our scope of activities is traditionally very broad and also includes the construction of special-purpose machines and moulds.

Our main profile: Powder coating Precision Sheet Metal Punching, cnc Component manufacturing Corrosion protection We offer a complex service: - Planning the production of the components ponents surface treatment. Our company started as a small family business in 1997. The company started its production in a 300 m2 building with only an oven for powder coating. Today we have a 11,000 m2 - Production line with a 2000 m2 hangar. In the beginning we had only 4 employees, today we have a staff of 18 employees. From the beginning it has been our goal to produce quality products and to show our customers our best side. Due to our high quality standards, we were able to build long-term relationships with both national and international partners. Our company still operates as a family business, which helps us to keep administrative costs and our prices low. To adapt to the market, we introduced a service, which affect not only surface treatment, but also the complete production of equipment and spare parts in close cooperation with metallurgical enterprises. Our goal is to offer perfect services to our customers. Iso 9001 wiki

the company Roland Fischer GmbH in winter Bach enjoys in precision turned parts manufacturing for decades a special reputation for their expertise, quality and reliability in the manufacture of turned parts. Like some other Swabian component manufacturers with widely known in Europe, they could also earn a special place in their area. Surely this reputation for delivering precision work immediately reliable, the ability of the company contributed mitzutragen new developments, they operate in a very short time and produce prototypes. The Roland Fischer-production program includes over 1200 different precision turned parts. The diameters are from 1 to 22 mm. We also manufacture turned parts up to form 43 mm diameter. With cross and back machining. The following materials are used: Aluminum, stainless steel, brass, titanium alloys, cutting steel Our turned parts include the following range of parts: Axes, adapters, adapter bolts, adapters, panels, bolts, bushings, bypass screws, spacer bolts, spacers, spacers, throttle spindles, pressure rollers, jet inserts, jet needles, set screws, eccentric, lead nuts, guide pieces, sleeves, clamping screws, magnetic pin, magnetic screws, adapter, circuit boards, pole cores, detent pins, reducing connector, push rods, studs, styli, adjusting, stem nozzle, truing, inter alia,

We are your specialist for pressing, stamping and deep drawn components for all levels and materials, welding (MAG, TIG, resistance welding), laser machining, nibbling, edging, drilling, tapping, processing all surface finishing, component assemblies.

ZN-Metall GmbH, based in Teising, was founded in 2016 by Andreas Nold and Christian Zerbin. In the meantime, the production area has been expanded to a total of approx. 3.000 qm with a second location in Heldenstein. Our modern machinery, consisting of innovative machining centers, meets the highest requirements for all production components. This wide range of production, our motivated team and many years of experience in metalworking make us your ideal partner when it comes to manufacturing all types of components — from prototypes to series production — from individual parts to small and large series In our profile processing processes, we specialize in non-ferrous alloys. In this way, we combine our strengths and guarantee proven quality — tailored to your individual requirements. As a metal processing company, we produce according to your drawings in the required quality at competitive prices. In doing so, we always pay attention to the best compromise between optimal resource conservation, economic efficiency and production processes. For us, effective work processes are an essential part of order processing. From the blank to the finished product, we deliver everything from a single source.

We are a small machine construction company, which has the complete machine and plant incl. Planning, design, manufacturing incl. Controller operates. In addition to our special machines Haubtbereich is the packaging and conveying We also manufacture parts and serial parts to customer as turned parts, milled parts, drilling parts, welded parts, or combinations thereof with metal processing, also we manufacture welded constructions complete with surface finish in our home Your contact person: Michael Schäfer Tel 0049 06641 9120690 or by email: smt-maschinen@t-online.de Translation by Google Translate

We are an innovative and powerful companies in the metalworking industry, which successfully presented by flexibility, high quality and manufacturing standards for several years on the market. With an efficient and equipped with CNC technology, modern machinery, we manufacture items, sample parts, small and medium series in all standard and special materials. With over 35 years of experience in mechanical engineering and metal working, we are now even to realize highly complex manufacturing tasks is able to provide our customers requirements to meet.

The company evolved from its humble beginnings thanks to the skill of the founder, Friedrich Wilhelm Hoffmann, in 1879 in Miihlberg / Elbe, a powerful construction and fitter. Today the building and machine fitting Friedrich Hoffmann is a company that combines the knowledge and skills as well as the economic experience of 4 generations in itself and as a traditional heritage passes on to the next generation. The production range includes the 5 major fields of mechanical engineering, metal, steel, stainless steel processing and CNC technology. The technologies of the individual fields can be individually combined and thus the optimal solutions drawn, where is set to a functioning quality management. The company is involved in the technical implementation of development projects and is in the manufacture of single and special parts as well as series a flexible partner. The waterjet cutting center offers many application possibilities. With the water-abrasive jet almost any material can be cut: * Metals, glass * Rock, technical ceramics * High strength and difficult to machine alloys (eg, nickel based alloys, titanium) * Plastics * Composites, fiber composites and laminates * Sandwich materials * Organic Materials The water jet without Abrasivmittelzusatz is especially suitable for processing soft and pliable materials: * Leather, textiles * Foams * Cardboard, Corrugated Board * Pulps * Fiber Composites Features: * Cut into 2 1/2 - D * Minimum contact pressure * Drilling and cutting with the same tool * No mechanical, thermal or chemical degradation of the workpieces * No generation of harmful gases or vapors * Minimum notch area * High Ka

We manufacture precision parts in the areas of CNC turning, milling and grinding in small, medium and large series. In the centerless grinding passage we have a high degree of automation through efficient grinding systems. We grind steel, aluminum, brass and hard chrome. By super-finishing we achieve surface finishes down to Ra 0.04 microns and Rz 0.4. Special know-how we have in the processing of stainless chromium-nickel steels. As an A-supplier for renowned equipment manufacturers reliability and delivery reliability is a matter of course.

Since 1925 we have specialized in metal machining and in the production of precision mechanical components, seeking innovative and increasingly effective technical solutions. Our production chain allows us to offer the best quality product at the most competitive price. Each project is unique and requires a tailored approach. For this reason we do not set ourselves technical limits: our strength lies in studying and implementing the technologies necessary to create quality products.

Specialised in Tube Processing and complete solutions of Precision Steel Tubes, Stainless Tubes and Aluminium Tubes.