We are a medium sized company that deals with the casting and machining of aluminum products. In our house create approximately 50 employees, from engineers on skilled workers to trainees in the departments Die-casting, grinding, machining, CNC machining, grinding, polishing, powder coating, printing and mounting, as well as ultrasonic machining with measurement, X-ray inspection and documentation . To our national and international customers include companies from the industry and craft fields of electrical engineering, automobile, gear technology, food and household goods, instruments, leisure and garden furniture, furniture, multimedia and pump technology. Our goal is to offer you a product from planning and design through to the finished part. For about two years we have hizugenommen to our Gießkompetenz Gravity die casting, the liquid presses and can produce very dense microstructure cost without sprue and riser with this procedure.(Pans, feet, pots but also more complex structures) Die cast aluminum 11 in electric furnaces, the aluminum is molten. Depending on the product and use a wide variety of alloys with appropriate melting and heat treatment applied. The liquefied aluminum is poured by hand with the help of a ladle into molds (molds) that are placed in advance with butane gas fires to temperature. After a specified Erkaltungszeit the mold is opened and the casting. On average, we pour about 90 parts per mold and layer. Each casting is subject to a visual inspection. The QS takes interval based front-destructive material testing, to observe the casting quality in the interior of the piece. CNC machining In many cases, machining operations are necessary. We have built our own house CNC department that allows all kinds of 'rotating' and 'milled' edits. Manual edits In many cases, manual activities are as deburring, judge or drill and tap drill necessary or not feasible other than by hand. Too, we have adjusted competent forces involved in these activities. Most of the edits are performed on specially constructed devices. Sawing, grinding, After casting sprues and risers are separated with log band saws. After the parts are tempered, meaning they are cured in convection ovens at 570 ° C and annealed at 180 ° C. In the grinding castings for machining are prepared or prepared the surface for subsequent coating. Also, the dimensionally accurate grinding after drawing is dominated by our professionals, so that a subsequent machining can possibly be dispensed with. After fine grinding, polishing takes place. The customer receives the polished finished product. Powder coating To give the surfaces of castings a sizable structure or enhanced durability, abrasion resistance, weather resistance, etc. (surface finish), we have built a powder coating. Here we wear electrostatically charged powder onto the workpiece that is subsequently heated in the oven and after cooling results in a solid coating of the workpiece. The quality of the coating is ensured and documented checks of layer thickness, adhesion and resistance. Assembly In addition to manufacturing the einzeilnen components of a product, we take care of you, of course, partial or complete assembly of the entire product. We ship the finished products, of course, directly from our company to your customers. ...

Our engineering office was established in 1954 and is headed by Dipl.-Ing Peter Kaczynski since 1988. From the beginning, the focus was the procurement of machinery parts in the international supply markets. For 20 years, these are primarily Foundry products from worldwide manufacturing, as Steel investment casting, stainless steel investment casting, lost wax casting, sand casting, permanent mold casting, die casting, aluminum investment casting. Furthermore, we also supply MIM parts (metal powder injection molding) and sintered parts. Also, turning parts, stamping parts, metal stamping bending parts and forging parts belong to our program. Mechanical machining (CNC turning, CNC milling), heat treatment (hardening, vacuum hardening, induction hardening, carbo-nitriding), surface treatments (zinc plating, electro polishing, polishing, chrome plating, nickel plating) are now standard. Module assembly after consultation with our customers. All our foreign partners are certified.

Dear Ladies and Gentlemen, We specialize in aluminum sand and permanent mold casting. Our decades of experience in the field of aluminum technology in the automotive as well as in the gas valve sector sets us apart. We want them to benefit from our strengths. Quality cast • most complex geometries • Precast delivery • Short-term order processing • Flexibility • Certified according to ISO 9001:2008 We advise and help you with our experience in the interpretation and the most cost effective manufacturing of your cast aluminum component. Challenge us and join your tasks to us. Together we will find a solution. Give us a try!

BMC is an international trading- and service-company. We deliver industrial goods in all quantities – we are mainly specialized in trade in foundry products, articles of mechanical work, bending and welding goods. With our Partners we guarantee, that You receive your ordered goods on time – compliant to the quality we have established together. Our scope of activity includes in principle all industry products: Forging parts, Sheet parts (cutting, die shearing, stamping, welding) Rod parts and profiles Welded constructions Casting parts Mechanical Working (on conventional and CNC- controlled machining machines, Machining centre) Anticorrosive protection (galvanization, lacquering, pulverization, cataphoresis) We can supply You with all products fully machined, varnished and assembled. Our field of production includes all materials used in industry. Our company offers not only fabrication of the product, but also complete support starting from design till overall production and delivery to our customer, with all production stages such as: construction, engineering optimization process, pattern and instrumentation creating, machining, treatment, coating and assembling. On request we can deliver all products as raw, semi-finished, finished parts. Also assembled and with desired surface (raw, primed, painted – wet or powdered, anodized, burnished, KTL-coated, galvanized) and / or heat treatment (nitrided, hardened, tempered, etc.). With our range of services we have every opportunity to support our customers quickly, flexibly and efficiently. We can guarantee good quality together with on-time delivery. Take advantage of our shopping opportunities in this area.

Ernst Bröer GmbH - gravity die casting foundry for and pre-finished castings Welcome - our high-performance aluminum foundry offers versatile options, such as the machining of castings: - Gravity die casting in aluminum - Small and medium series of aluminum up to 15 kg - Extensive experience in Kokillenbau or with Kokillengussteilen For us as a successful aluminum foundry casting technique is a credible system and development partnership for projects in casting not only limited to permanent mold casting. With collaborations with fellow foundries we find for your requirements the right casting and the right material. Our foundry mold casting provides medium flexibility not only for pre-finished castings, but also for the machining of castings.

Our fully integrated foundry has many years of experience, cutting-edge technology and first-class infrastructure. We are pioneers in the production of steel and aluminum alloys and multi-material bronzes of the highest quality and provide you with products that meet the highest standards. As a proud member of the Foundry Alliance group of companies, we strive as a precision foundry to provide our customers with first-class products of the highest quality that not only meet their requirements but also offer them significant added value.

Leading specialist in metallurgical products and high-quality castings. With decades of experience and state-of-the-art technology, we develop and manufacture innovative solutions for a wide range of industries. Our focus is on the highest quality, precision, and personalized customer support – from development to series production.

Founded in 1975, AHS Anadolu Hidrolik is a Turkish manufacturer of cast and machined components for the agricultural, automotive, construction and industrial machinery sectors. With two production sites in Konya and Kırşehir covering 65,000 m² (40,000 m² indoor), we combine large-scale iron and aluminium casting with high-precision CNC machining, welding, assembly and surface treatment. Our foundry in Kırşehir has a daily capacity of 60 tons with fully automated DISA, HWS, DH7 and Alphaset moulding lines, producing castings from 2 to 2,000 kg in grey and ductile iron (GG20–GGG70). In Konya, more than 70 CNC machines (horizontal/vertical machining centres, lathes, grinding, hobbing and gear cutting) provide finishing, assembly and testing of complex components. Typical products include hydraulic pumps, valve blocks, cylinders, steering systems, gear housings, transmission and engine casings, shafts and gear parts. Our in-house welding and painting workshops, phosphating line, robotic paint booths, and CMM/spectrometer quality labs ensure reliable and traceable production. AHS exports to over 60 countries worldwide and is ISO 9001 certified, serving global partners in agricultural machinery, automotive, hydraulics and heavy industry.

GMR Endüstri Teknik is a foreign trade company, which is supplying custom made drawing parts and industrial products from Turkish Industry according to variable customer demands. GMR located in Bursa, Turkey where is the heart of Turkish manufacturing industry. We are focused especially on custom made parts for European automotive manufacturers and their suppliers. We are supplying precision turned&milled parts, cold&hot forged parts, special connecting elements, sheet-metal parts, laser&stamped parts, welded components, aluminium injected parts and cast-iron parts for automotive and various industries. The range of products that can be supplied by GMR with ease of access to powerful factories located in the surrounding provinces are quite large. Apart from semi-finished and finished products, various raw materials like aluminium sheets and profiles, cold&hot rolled pipes, acrylic sheets, aluminium foils, special packaging goods and all kind of industrial demands can also be supplied by GMR with required certificates and test reports.

CAST specialized in casting for industrial production by cast iron, ductile iron, steel, stainless steel or aluminum. Every project is produced on client's specification, giving a special attention to the business dimensions, the specific standards of the products and the qualitaive characteristics required. In this way a complete support to design and industrialization of products can be given. Reduction on prototype timing and of pre-series is one of our main goal. The demanding market require more customization of products and continuous technical improvements even during production. The formula"0% DEFECT" is guaranteed. This force us to have a continuous improvement on all our supply chain, starting from industrialization to the choice of casting process, with deep control of every possible cause. Satisfaction for us, guaranteed result for our client.

• forms and jigs • mold and composite casting in all common aluminum alloys • Machining in CNC technology • 3D coordinate metrology We have for decades been an established company in the metalworking industry and place the highest value on quality and delivery. In "altmann" high-quality molds and composite casting is manufactured in all common aluminum alloys, for unit weights of 30 g to 3.5 kg. Our annual output is about 200 tons.

And we offer the model to finished parts all from one source. Ongoing adjustments to the production process and quality assurance facilities in production are the advantages of our company. We produce on our farm in Derendingen mainly high-quality castings for the engineering industry. From single parts up to series. In the following procedure we produce your castings: * Sand castings from 50 grams to 200 kg. * Permanent mold castings from 10 grams to 10 kg. * Vacuum castings in the ceramic process to 6 kg. Aluminum castings have the advantage that they are often more economical to manufacture compared to welding, milling or assembly constructions. Mostly they are also stiffer and cheaper. The following work we offer: * Advice on the design * Preparation of the models and mold plates * Manufacture of castings * Organize the mechanical finishing * Surface application * Installation works

Our representative range includes: Aluminiumsandguß, Aluminiumkokillenguß, Die-cast aluminum, Die-cast zinc, Messingdruckguß Stahlfeinguß, Edelstahlfeinguß, Gray cast iron, Nodular cast iron, Mechanical processing, Model and surfaces. Our main focus is in the field "Service". We understand it as to-be always there for our customers to solve problems constructively participate and advise in detail. We, that is, we represent foundries exclusively manufacture according to customer drawings using the latest equipment and machinery. Due to the variety of parts we, have we and our specialist light in almost all industries over the corresponding know-how. We are happy to work in close cooperation with you for an optimal offer for you.

OZAY DOKUM is a supplier of aluminium die casting parts to automotive, household appliance, furniture, electric/electronics industries with its ISO 9001:2000 certification. OZAY DOKUM is capable of internally designing and producing tools/moulds, precision machining, brass hot stamping, zamak(zinc) die casting, and surface finishing. Test laboratory is completed with highest technology test equipment like X-RAY, 3D CMM, Spectrometre, Hardness- Rougness Testers, Profile Projector, Leakage Test System.

NARROW & SHOULDER FOR MORE COMPETENCE For over 60 years, Schmale & Schulte has dedicated itself to the development and production of sophisticated products made of die-cast aluminum and die-cast aluminum. Our company was founded in Lüdenscheid in the Sauerland in 1954. Our successful corporate development is still characterized by a balanced relationship between tradition and progress. Today we supply leading companies in industrial and medical technology, mechanical engineering, the automotive, construction and furniture industries with high-quality products. If you want more competence, you are welcome to fall back on our know-how in the design and development phase. We support your company in a professional and result-oriented manner from the development of your product to series production.

Since 1961, the metal casting Arolsen as a medium-sized company and solves many customers their casting problems. We produce in aluminum die casting aluminum all- Hut alloys Standard alloys Special alloys Castings from 10 grams to 40 kilograms. Our own model and Kokillenbau is especially dedicated to practical solutions. Of course we also manufacture composite casting. We process the castings as desired, eg: vibratory finishing, drilling, turning, threading, polishing. We supply castings for all industries: Agricultural Engineering Engineering Furniture industry Medical Electrical Engineering .... From the micro to large series.

Industrial representation for technical moldings-According to your drawings, we provide sophisticated precision parts from prototype to mass production. Technical advice on the development, delivery, quality and competitive prices are our goal. The following products we can offer you: Rotary / milled parts, stamping parts, die casting, gravity die casting, plastic injection molding and forging parts.

Fine castings of steel and non-ferrous materials including heat treatment and mechanical processing, Mold making and prototype production