h2> Success- now and in the future /h2> Through continuous development over the past 75 years, Charles Scharrenbroich GmbH & Co. KG has grown into a high-tech oriented company. Since then, this name stands for the production of high-precision and precision cut parts and components for axles, steering, transmission and aggregates of various kinds of high quality. Our customers include well-known European manufacturer and supplier of automobiles, vehicles, transmissions and engines.

Laser welding, laser cutting, laser hardening, laser powder build-up welding The NUTECH Laser Center handles sub-contracted components and assemblies from prototype up to mass production in 3-shift operation. We assume the material procurement, storage, assembly and mechanical pretreatment and aftertreatment. Our core competence is in the fields of laser cutting, laser welding and laser surface treatment of steel, nonferrous metals and ceramic materials. We are a development partner for the construction and development of prototypes and process parameters. We are DIN EN ISO 9001: 2008 certified and recognized as laser welding to DIN EN ISO 3834-2. Translation by Google Translate

Since 1952 WSK "PZL- Kalisz" S.A. has been representing Polish aircraft industry and manufacturing aircraft piston ASz-62IR and AI- 14R engines. They are designed to power the following airplanes: An-2 and M-18 “Dromader" (ASz-62IR) and respectively PZL-101 “Gawron” and PZL-104 “Wilga” (AI-14R). These engine types have been worldwide recognized for their quality and awarded numerous quality certificates issued in the USA, Canada, Brazil, People’s Republic of China. They have been produced in thousands and have proved failure free thus clearly evidencing their highest reliability and performance quality. WSK “PZL-Kalisz” S.A. also overhauls and performs repairs of ASz-62IR and AI-14R engines. In addition, the Company manufactures and repairs assemblies and parts of TWD-10B engine for An-28 aircraft. WSK “PZL-Kalisz” is a joint-stock company (own capital is 85 mln PLN and paid-up capital is 45,86 mln PLN) operating on the basis of the Commercial Company Code. Principal shareholders of the Company are as follows: - Industrial Development Agency 75,45% - Company employees 11,59% - SEMA Sp z o.o. 6,25% - the City of Kalisz 1.35% - Energy Plant "Energa S.A." 1,20% - Other shareholders 4,16% WSK “PZL-Kalisz” is a capital group composed of the mother company and its 2 fully-controlled subsidiaries: - ZOT “NARZĘDZIOWNIA WSK” Ltd. - PPUH „MECHANIK” Ltd. WSK „PZL-Kalisz” S.A. is the company of the essential importance for the Polish economy and is considered as part of the Polish Defence Industry Potential. As a result of the Company's restructuring process WSK "PZL- Kalisz" S.A. has extended its business into wide range of manufacturing programs and servicing activities including production of high pressure engine parts, oil pumps, gears, aircraft screw gears, turbochargers, push rods, pump housings and first of all crankshafts for high pressure engines. All these components require high precision machining in performing special requirements of its customers. WSK "PZL-Kalisz" S.A. maintains business relationship with well-renowed companies such as: General Electric Transportation Systems, Allison Transmission, Turbomeca, Sulzer Textil Switzerland, Pratt & Whitney Kalisz, and many others. Part of the Company production is designated for military aviation. The Company aim and priority is focused on meeting the Customer’s requirements that can be with WSK "PZL-Kalisz" capacities. WSK “PZL-Kalisz” S.A. acquired modern machinery operated by highly qualified and experienced technical staff. The Company continuously seeks new Customers and Suppliers especially in the manufacturing of precise and aviation components requiring high precision processing. Interested partners are always welcome. In 1999 the Company was awarded ISO 9001-2000 Certificate. In 2000 the Company was granted PART-145 Certificate. The following year – 2001, the Company attained PART-21G Certificate. In 2002 the Company was awarded AQAP-2110 Certificate. In 2004 WSK “PZL-Kalisz” S.A. was granted a license by The Polish Ministry of Internal Affairs and Administration for manufacturing and trading products and equipment for military and police force application as well as transfer of technologies. In 2009 the Company was awarded AS 9100 Certificate.

The company Frentech Aerospace sro, now one hundred percent in the Czech owned, was founded in 1994 to be with the aim to become a qualified and competitive suppliers in the field of precision engineering. Initially, the products were targeted in the field of medical technology, microelectronics and special machines, including the delivery of spare parts.

Gutekunst connecting parts GmbH is your specialist for standard parts and custom parts. In almost all materials we manufacture from small to large, from simple to complex. By default, we process all common plastics, steel and nonferrous metals. By an appropriate stockpiling we can respond to our customers' requests in individual cases quickly.

A. WENZLER GmbH & Co.KG has produced precisely engineered turned parts for industry since 1962. The company is considered to be one of the leading partners in the automotive and medical technology sector. When Jens Kurzhals, machine operator at Wenzler was interviewed, he said: "Our pieces are not supposed to be good, but excellent.“ He only needed a few words to sum up the philosophy of the company steeped in tradition: We want to move the world forward a little bit with every turned part. s t r u c t u r e: Size of operation: 42 employees, breakdown: 30 in Production, 4 in Administration, 3 in Quality Assurance, 5 apprentice (cutting machine operator) QM System: Certified according to ISO 9001:2002 and ISO/TS 16949:2002 Sales in 2008: 5.0 million Euro Investments 2008: 1 million Euro p r o d u c t i o n: Materials Free cutting steel, case hardened steel, structural steel and tempering steel, rust and acid resistant steel as well as extrusion metals such as brass, copper, aluminium and titanium Further processing Polishing, honing, deep hole drilling as well as all kinds of thermal and surface treatments

Development, design and production of complex system solutions in the field margins and fairs. Innovative manufacturer of modular fixtures and modular systems for machining centers, mechanical clamping means of quality control, to the special industrial equipment. CNC manufacturing, vacuum plasma nitriding

Our enterprise is a private company which continues the 25-year tradition of clutch and brake production in Ostrzeszów, Poland. The company was established in 1993. We employ a highly qualified staff of over a hundred and have our own research and development base. We manufacture a wide range of controllable clutches and brakes used in machines and appliances in various branches of industry. We also cooperate with major German enterprises in this regard. In order to guarantee high quality of our products and meet our customer's needs, we implement the ISO-9001:2000 quality system confirmed by a certificate obtained from DQS. Range of services offered by FUMO–Ostrzeszow: 1. Machining: • Turning: Dmax = 560 mm; Lmax = 900 mm; weight max 100 kg • Milling: Lmax = 1000 mm; Smax = 1000 mm; H max = 1000 mm; weight max 500 kg • Straight teeth chiselling: Dmax = 500 mm; Lmax = 90 mm; module mmax = 5 • Grinding of holes: Dmax = 120 mm; Lmax = 160 mm; weight max 25 kg • Grinding of shafts: Dmax = 150 mm, Lmax = 500 mm; weight max 25 kg • Locksmithery and fitting, including the winding of coils of self-baking wire: coil wire dimensions: D=0,15÷1,40 coil dimensions Dotw 25÷200; L = 10 ÷ 80 mm 2. Heat Treatment: • Hardening of pieces in the electric tunnel furnace with ZAS III protective atmosphere piece flank Lmax = 450 mm lub D max = 450 mm; thickness 0,5 ÷ 6,0 mm; weight max 4 kg • Annealing, hardening, tempering in furnaces without protective atmosphere SQ310 • Induction hardening with UNITERMA–60 system 3. Thermochemical Treatment: • carburizing 4. Chemical Treatment: • phosphating of pieces coat thickness 0,003 ÷ 0,005 mm • blacking 5. Plastic working: • die shearing, stamping, tonnage capacity of the press: 16; 100; 400 tonnes 6. Tool Shop Work: • Manufacture of technical instrumentation • Manufacture of plastic working instrumentation: blanking dies, stamping dies, etc.

Production of technical glasses and safety glasses

Our group unites aluminium casting, machining, assembly and component testing under one roof. Situated in the heart of Europe, HAL supplies clients worldwide and is well prepared to serve any industry or application. We produce for the industries engineering marine, motor production, energy sector as well as vehicles and automotive engineering. Engineering - Aluminium Casting - Machining - Assembling - Testing - Quality

Aluminum castings, molds and Werkzuegbau, mechanical processing and heat treatment.

At five locations in Germany Herzberg am Harz Stuhr near Bremen Norderstedt near Hamburg Reinberg in Saxony Thale in the Harz Mountains, leads the group HEAT heat treatment on a broad range of technologically sophisticated products through. Clients come from the aviation and aerospace industry, the automotive industry and in mechanical engineering. Heat treatment on a large scale and important contributions to the optimization of the performance features delivers the HEAT Group for the automotive industry in the areas of: - Passenger restraint system - Diesel injection systems - Suspensions - Drive Technology

Gradert Engineering is specialized in turning, milling, grinding and measuring of high-precision, custom-made machine parts as well as in their assembly to machine components including the production of rolling bodies with the necessary coatings for printing machines, film coating equipment, corrugated equipment, textile and paper machinery etc. The rolling production is carried out of different materials such as steel, aluminum, CFRP (carbon fiber reinforced plastic) and GRP (glass reinforced plastic), including their surface coating with plastic (polyamide 11), rubber, polyurethane, silicone, chromium, copper, nickel, ceramic, Teflon etc . Due to the high qualification of the staff and the use of advanced machining and measuring equipment Gradert engineering is able to ensure the highest quality standards in terms of surface quality and shape and dimensional accuracy of renowned customers in the international mechanical engineering. The company was founded in 1971 by Fritz Gradert is still an independent family business based in Schenefeld in Schleswig-Holstein, about 50 km away from Hamburg. Today at this location are nearly 200 employees who make precision work on over 10,000 m² of production space.

Tehnomat Inginerie Industriala is a Romanian company located in Cluj-Napoca, it was founded in 1998 and our activity is structered to designs and manufacturing assembly line. specials machines and stations for automotive industry.

Our company was established already in 2003, when the company was entered in the commercial register. We deal mainly with the metal processing on CNC milling machines. For this activity we have the necessary technological equipment. We use modern technologies of processing on CNC machines. In 2007 we began working metal on CNC lathes offer. The company at this time is 13 employees and is constantly developing.

Ranieri is an Italian company certified ISO9001:2015, a sub supplier specialized in the production of industrial rollers: conveyor rollers, rubber rollers and cylinders. Our partners operate in different sectors such as the paper industry, earth moving machines, agriculture, wood and other industrial machines which need rollers upon technical drawing that reach diameter Ø520mm and length 3.150mm.

We are a precision steel processing company. Thanks to modern technologies, we are able to help you cut costs with the best quality of your product. Please feel free to contact us with any job, we'll do our best to make for you the best offer.

Metal Process 18. May is a family owned business that operates in Gornji Milanovac, Serbia and currently has CNC milling machines and CNC lathe machines. The company's target market is mostly based in Serbia, as well around Europe, such as in Germany and Austria. We plan to expand the locations of deliveries of our services to other Europian countries. Our company is committed to providing the best value for money, fast and efficient service, that brings us good reputation far above competitors. Managing Director Vladimir Obucina, together with experienced and skilled staff intends to provide customers with optimal products to meet customers goals and needs. We continuously challenge ourselves to prove good quality service to customers and exceed their expectations. Metal Process 18. May objective is to find a trustworthy partner that will help us to expand our markets and establish a win-win business relationship. Thank you for your time, and it would be a pleasure to get an opportunity to become a partner with a great company such as yours If you have inquiries please do not hesitate to contact us for any further information. All quotes and orders will be processed as efficiently as possible.