Ebbers Group Industies: is a group of five companies that together pour castings in any material and can edit. - Gieterij Neede: Founded in 1947 and acquired by the Group in 1998 Ebbers is a Eissengiesserei. Parts to 100 kilos are produced on a Kunkel Wagner Moulding Line Parts 110-4000 kilo are poured into our hand molding. (At the moment the production hall In the Past for larger parts is> 4000 kg) - Alucast Neede: taken over by the Ebbers Group in 1999 is an aluminum foundry, aluminum (alloys) is poured in the form of machines and hand shape area. - Bronsgieterij de Needse mountain: founded in 1978 and taken over by the Ebbers Group 2005 is a foundry bronze, aluminum bronze and brass (and laying stanchions) is poured. Up to 350 kg per piece. - Elm: founded in 1990 is a machining company that drills, mills and turning. And painting is possible. Elm edited parts for other companies. This year, invest in a turntable and Fäestisch.Now we can every part that we pour even edit! - Mercator Gieterij Neede: established in 1995, was the beginning of a trading company, the castings from Turkey shopped. Now we have taken over there a foundry, which also steel and stainless steel alloys can be cast. From each model in Turkey, there is also a model in Neede. Steel is possible up to 2,5 t piece weight. - Together, these companies have a Leco Spectro Analysis Center. This Machine has to measure the possibility of each material. - Also, we have an annealing furnace for annealing of each material. - The firm is ISO 9001-2000, 14001 and PED tested on. - We specialize in small batches and quick deliveries to about 500 customers in about 15 market groups. - This year the company made a total turnover of € 7.5 million - 30% of which is realized in Germany. I hope that you are informed for now enough and that we can talk another time with each other! With friendly greetings, Daan Klensmann Sales Germany Gieterij Neede BV Mountain trail 11 7161 PN Neede Netherlands PO Box 30 7160 AA Neede Netherlands Tel: 0545291441 Fax: 0545294260 Mobile: +31651746145 Email: daan @ gieterijneede.nl www.gieterijneede.nl

We are your technically competent and reliable partner for machining and offer you a large selection of production possibilities in a high quality. Through many years of experience and close customer contact, we know what is important and have made it our goal to implement every customer request to the fullest satisfaction. We manufacture single parts, small series as well as completely according to drawing. Upon customer request also special solutions as well as devices planned and also made. Through our CAD / CAM system HSM Inventor, we are able to create NC programs according to data. We are unbeatable in terms of scheduling, so that our customers can work according to plan. Through a revolutionary clamping technology developed by us, we are able to to manufacture complex small parts highly efficiently.

SMD GmbH CNC-precision turning- and milling parts introduce themselves. . Experience, reliability and precision can´t be replaced by anything! This is our challenge and we achieve all kinds of goals due to our flexibility, perfection and reliability, without losing sight of humans and the environment. A good team, modern machines, powerful effort and flawless quality are the best basis to become a reliable producer of machine turned parts, CNC turned an milled parts. . For that reason we keep close contact to our customers and partners to get the best ideas and results. Our web sites show you or expanded and convincing business activities. Production The more experience you have the more innovative ideas come along. We produce according to your guidelines, drawings or norms. Blank parts or parts ready to fit up to a diameter of 65 mm * CNC-lathes with rod loading systems * curving machines * CNC-machines * CNC-milling machines in large quantities, medium and smaller quantitier or even single parts, Mechanically machined an surface processing.

Our company located in Saxony has specialized in the production of quality parts and assemblies made of all materials. CONTRACT MANUFACTURING A comprehensive range of services guaranteed You dimensionally accurate production from one source. We offer you the following services to: • CNC milled parts with high precision and tight tolerances • Specialist in custom milled parts • Precision machining in small and medium series • 3 - to 5-axis milling up to a size • Simultaneous machining on 5-axis milling center • Welding assemblies in steel, stainless and aluminum • assembly • Drilling and threading • Surface grinding • Test and measurement (3D) • Surface treatment CORE COMPETENCE Work in accordance with ISO 9002 · Rapid response to your requests for changes during the job preparation · Distortion-free supply of products made immediately mountable precision parts · Competent and reliable partner · Know-how of our employees is the most cost-effective, cost-efficient and productive customer solution Quality management according to DIN EN ISO 9001:2008

OKUTEC is a medium-sized company with 15-20 employees for the manufacture of turned and milled parts made of engineering plastics. We are Kunststoffzerspaner and -Turn Milling Saws Drilling or mount it to your specifications. After drawing, standard or sample parts are as Manufactured individually or in volume quantities.

York Mechanical Engineering e. K. has specialised in the areas of special mechanical engineering, device construction, tool construction, individual part manufacturing and CAD/CAM manufacturing. From the simple instep device or SPS steered equipment installation up to complete solutions in the tool construction we offer customers an extensive know-how. Since the company is foundation in 2000 we work for famous enterprises in the food, packaging, glass, mechanical engineering, rubber, synthetics company´s industry. Our services include Sample and prototype construction Welding devices Cutting and stamping devices Devices for coating of car body pars Devices for the treatment and gluing Cutting knives and cutting materices Umformwerkzeuge, Biegewerkzeuge and subsequent group tools Prototype construction Project planning Construction Trick and Frästeile Zero manufacturing, individual manufacture and serial production Partial arrangement about call of delivery Plastic parts Sample construction and serial production Whether 3D-milling, Formfräsen, Hartfräsen, Gewindefräsen, CNC-Fräsen, to CNC tricks, hard tricks, Drahterodieren, Senkerodieren, data takeover 3D-to systems CAD/CAM, level loops, top loose loops, round loops, WIG MIG LIKES welding, - we have the right equipment. Almost all materials are used: High-grade steel (1.4021, 1.4028, 1.4029, 1.4105, 1.4301, 1.4305, 1.4307, 1.4401, 1.4404, 1.4435, 1.4571), steel (16MnCr5, 42CrMo4, C40, C45, FE510 (S355JR), FE360 (S235JR), 39NiCrMo3, 18NiCrMo5), machine steel, Duplex steel 1.4462, aluminium, bronze, plastic (POM, PVC, PTFE, PEEK). After a mechanical treatment the following ist possible: Caseharden, Induktionshärten, Vakuumhärten, Ölhärten, as well as in the area of the wide treatment and surface treatment washing, degreasing, to site foremen, electric site foremen, deburring, loops, Gleitschleifen, sandblasting, Phosphatieren, Brünieren, galvanising, nickel-plating, chromium-plating, Hartverchromen, anodizing and Passivieren and next hard treatment. Specialized professionals and a strict quality control allow us to comply with the highest standards and to offer a puncutal and precise service. We are successful because we take the partnerstrip with our customers very seriously. Since its foundation, York Mechanical Engineering has constantly grown with the new demands of the market.

KEEPING AHEAD Innovative solutions for your business - individual and interdisciplinary. The company group PFAHL in Gera consists of the two companies PFAHL Systemtechnik GmbH (est. 1990) and PFAHL Gerätebau GmbH (est. 1992). Our network is a powerful and innovative partner for Packaging, plant and commercial vehicle manufacturers. Our technologies improve the performance of special industrial machinery and equipment, as well as agriculture, forestry, municipal and construction equipment. The core business of PFAHL GmbH is the comprehensive care and efficient project work on behalf of our most demanding customers in the four business areas: Systemtechnik | Device Technology | Commercial vehicle equipment | water treatment We think and work as a team - interdisciplinary and cross-project. We have the everlasting goal in mind: tailor technology for individual needs Through years of intensive and trustful cooperation with industrial partners we have continuously developed and established itself as a complex working and holistic thinking system suppliers.We support our customers allumfänglich from planning, project planning and development, manufacturing and commissioning to service attendant mechatronic systems and equipment for mobile machinery and stationary applications. Starting from a vision we develop individual solutions - from prototype to series production. Here all customers benefit from the know-how and the extensive experience of each employee at PILE.

IWB Industrietechnik GmbH is an owner-managed company with over 65 employees in Gotha. Our focus is on the production of conveyor belts and conveyor solutions. Furthermore, CNC-milled and turned parts are manufactured for different branches of industry. The modern machine park includes 17 machining centers for parts up to 3000 mm in size. We are set up for both single part and series production. Of course we are certified according to ISO 9000-2015

HZG Hildesheimer Zerspanung GmbH is a contract manufacturing company based in Hildesheim and produces various components up to assemblies according to PDF, DXF / DWG, IGES or STEP files for industry on modern machining centers and CNC milling machines with rotary and swivel heads. We work strictly according to DIN EN ISO 9001: 2008 and secure the production steps with the latest technology. This guarantees complete traceability for all parts, from cutting to the finished part. Your wishes are realized on different 3-axis and 5-axis CNC machining centers using the latest technologies. For us, this includes a high degree of accuracy and quality, with adherence to delivery dates and reliability being very important. Our well-trained employees monitor, manufacture and document all work steps and process steps so that complete traceability and repeatability are guaranteed. Our machine park includes various systems, from the smallest part to the component size max. 2,100 x 5,000 mm. We also offer assembly of assemblies, welded parts, coloring and complete logistics. All from a single source. We would be happy to work for you and would be happy to help you.

We are a renowned company which offers high-quality CNC metal parts according to specific requests and orders of our customers. Our expertise and experience enable us to meet the high standards of different industries in the regional, as well as the international market. It doesn't matter if you are in the automobile. healthcare, energy or another type of industry, our experience allows us to adapt and deliver metal parts of the highest quality, made per specific requests and quality standards.

DMaier GmbH is a family business with decades of experience in the metal industry. We provide customers with high-quality products and provide excellent customer service. Modern technologies enable us to achieve even more precise results by simplifying and automating our processes. Our company was founded over 25 years ago and has grown steadily since then. We are proud of our many years of experience in the metal industry and our reputation as a leading provider of high-quality products.

Highest precision and quality! The osp präzisionsteile GmbH is a powerful company in the field of machining technology. With modern CNC machines we manufacture for leading companies from different industry segments: mechanical engineering, automotive, aviation and aerospace industry, measurement and control technology, medical technology, the specialized glass construction. 40 years successfully in the market! Decades of experience with highly accurate precision components qualify us as a reliable and competent partner for industry. CNC turning and CNC milling 5-axis machining / 3D - Models Conventional turning and milling Round and flat grinding Prototype and tool Complete assemblies Parts and spare parts production Small, medium and large series Weldments Wire and die-sinking EDM 3D metrology CAD / CAM - Cimatron Power spectrum We manufacture precision parts for the most various industries: machine building, the automotive industry, motor sports, aviation and aerospace industry, measurement and control technology, medical technology and the specialized glass construction. Our product range includes: Equipment and devices Machinery and plant components Prototypes Items in small, medium and large series Assemblies Glass fixing systems The

It does not matter what kind of error or problem your system has. Our competent service team will take care of your matter. Our range of services from Remagen is very diverse. We offer the right solution for you, from maintenance to assembly service and CNC production to a wide range of spare parts. We will also help you in the field of special plant construction. We offer each customer an individual solution that is tailored to the customer-specific branch or industry. Because no area of application is like the other. Our technical know-how and innovative solutions ensure a great competitive advantage that is worthwhile. Take us to Ko