Corporate Vision Buderus Guss GmbH Fine is a customer driven, comprehensive solution provider for geometrically challenging investment casting components with specific material challenges and machining issues. The service offering includes raw castings as components ready for installation including test documentation, mechanical machining, coating and painting. We offer our customers a competitive advantage by short delivery times, intensive development support for new projects and an excellent cost position and the highest product quality.

Fine castings of steel and non-ferrous materials including heat treatment and mechanical processing, Mold making and prototype production

We are manufacturer of micro casting parts made of different materials such as ferrous metals, steel, aluminum and various special alloys (eg, precipitation hardenable copper alloys). The method MicroGuss was developed by our house and worked out in the last 30 years for precision. Use, the procedures wherever the smallest components with complex geometries are required, but other methods reach their limits.

The KDYNIUM, joint stock company produces castings by the lost wax (The rating of VW and CHRYSLER with RATING "A") Since 1954 the foundry works for a wide range of customers. Many years of experience, that the best results and the best utilization of the benefits of the investment casting process are achieved when the designers and the customers and our top technologists already at the design stage technicians work closely together to achieve optimum component to entwickeln.Durch perfect use of all possibilities of the method also very complicated shapes of components can be realized. When inquiring about investment castings we make you an offer including a draft of the investment cast design. Before the start of series production, our investment casting foundry is keen to get all the important information about the product to our responsibility and liability for the security according to the international standards, to do justice. After acceptance of the offer, we produce failure patterns, as they are released, we start the series production. Construct for the pattern and volume production and we are producing such tools, the price for this will be calculated separately. We strive to satisfy our customers through both the technical level of the castings as well as by the quality and adherence to delivery. An experienced staff of KDYNIUM AG is always ready to meet your needs and also offers a consultancy service as well as help in solving technical problems in the design and use of investment castings

Our powerful Werzeugbau with about 10 employees, manufactures injection molding tools up to size 600 x 600 Our production range includes tools for small and intricate injection molded parts as well as multi-component and Reel-to-Reel - Tools. Our customers are mainly aud following industries: - Automotive - Electronics - Medical - Model - The toy industry Includes The machinery of our tool - 5 Milling Machines 3-axis CNC - 1 HSC milling machine - 4 Sinker - 2 wire EDM - 4 grinding machines Grinding Wheel Profiling - Various turning, drilling, - and cylindrical grinders - As well as 3 CAD / CAM - jobs Data in DXF, IGES, Step and Parasolid formats we can handle. The transfer can take place via e-mail as well as by "Fritz".

We are a Czech company (founded in 1998) with a German owner (lives in CZ). We turn and mill parts made of steel and aluminum. We also supply machined castings (aluminium, cast iron and investment casting). We buy castings from foundries in the Czech Republic and Slovakia. A coordinate measuring machine (Zeiss) is available.

I.C.I. is specialized in the field of precision microcastings based on the lost wax technique, mostly destined to industrial Customers. The company is in a position to dealing a range wide of materials: carbon steels, stainless steel, nickel super alloys and special cobalt alloys. We also realize artistic fusions in bronze and precious alloys. The attention to the Customer constitutes the basic foundation of the I.C.I. activities; moreover, the reduced dimensions of the company allow to maintain a constant and direct contact with the Customers and to guarantee them a complete satisfaction of requirements for total quality.

Pressure casting of non-ferrous metals, alloys Zinc (Zamak) and lead Main sectors: building 70% cosmetics, nuclear Integrated machining work Lead Specialist in Zamak and pressure die casting products from 0.1g up to 1Your Main sectors: housing at 70% and nuclear industries Cosmetics products Integrated machining

lost wax precision foundry specialised in technical parts for demanding industries. Small to large batches. 30 grammes to 30 kilo. Parts in any kind of steel, from carbone steel to stainless steel and super alloys. Full service including heat and surface treatment and machining. All kind of inspection upon request: dimension, metallurgical, X ray, ... Strongly involved in medical prosthesis, including grinding and polishing.

MESIT foundry, a.s., is a dynamically developing company with more than 60 years old tradition in aluminium alloys investment casting. We can offer in the house performed testing of mechanical properties, penetrant testing, radiscopy and radiography and 3D measuring. According to customer wish, casting could be machined in our machine shop.

As a powerful manufacturer of steel precision casting according to the lost wax we are successful on the market for over 50 years. With our motivated team, we have expertise and technical know-how. Our company's success is based on close cooperation and partnership with our customers and suppliers. With our 75 employees, quality, flexibility and punctuality can well agree. We manufacture unit weights of about 10 g to 70 kg. In addition to the customary use, remuneration and tool steels our strength is the shedding of rust-resistant qualities. We manufacture from prototypes to series part of all batches. Our customers include well-known companies at home and abroad, the highest standards of quality and delivery times set.

precision casting using the lost wax. Company founded in 1984 current 130 People .Effectif.

Eurocast is specialised in producing precision investment castings, in both aluminium and several steel alloys. Our technology enables us to produce very complex three dimensional products in almost every alloy. Since Eurocast is part of the Aalberts Industries group we are able to combine technologies of sister companies with our castings. The results are castings completed with surface treatment, machining, painting and assembly.

Founded in 1992, Epsilon has been serving to industry and has become the premium manufacturer for investment castings in Turkey. Epsilon is the certified supplier of most of the major aerospace, aircraft and commercial industries in Turkey. Using the most modern machinery, equipment and highly skilled personnel and the capability to produce from 1 gr to over 30 kg investment casting parts, Epsilon is pioneered investment casting foundation in Turkey. In-house machining capabilities, testing laboratory ,world class engineering services are allow as to provide our customers one stop shopping. Satisfied customers are the foundation on which we have built our company and our ambition is to exceed our customers' quality, delivery and service expectations. Don’t wait and contact with one of our representatives for consultation of your investment castings needs and give us the opportunity to serve you and be one of our satisfied customer.

Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment. Our mission We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products. We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.

You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding

When working in higher levels we are RELIABLE yours. Tiger Lift is a subsidiary of the company Paksan in Turkey. Our parent company is 32 years active in the Turkish market for metal processing and is represented in more than 50 countries. Tiger Lift is a further development of the Turkish mother and is active in both down- and upstream active activities for metalworking and for crane and lift design. We offer extensive services around the material to metal as well as in the processing of. We also use our expertise in materials processing as well as in mechanical and automotive engineering to our customers reduce anew with tailored solutions always ahead. We are of the opinion that German craftsmanship is combined bring additional value with our international experience to our customers. We do not only follow the latest developments in our fields, we also develop self-innovation. Especially in mechanical and automotive engineering company Paksan has its research and development work massive boost to lay already the breeding ground for the work of tomorrow. Also in the metalworking sector, we are constantly keen to improve and expand our expertise. We are in constant contact with renowned research institutes in Turkey. This high demand is supported by the large number of certificates that have gotten our products. We strive every day with our successful staff who is always trying to improve and our products, yet offer you better services. When working in higher levels we are RELIABLE yours.

After many years of experience in drive technology and gear construction, Net-Components GmbH was founded in 2003 by Dipl.-Ing. Tarkan Peker. It is a DIN EN ISO 9001:2008 certified company. With our knowledge of the international market and with the goal-oriented way of working, we always strive for market-driven and customer-oriented solutions. The execution of complex tasks in series production, medium and small series production, as well as prototyping is carried out on modern machining centers, which guarantee a consistently high quality and flexibly realize customer requirements. We are able to make short-term as well as long-term investments depending on the order situation and thus secure the production with regard to quality, deadlines and prices. One of the company's principles is to manufacture our products economically using safe and environmentally friendly processes and to meet high quality standards. Our striving for constant improvement and cost-effective production leads to the competitiveness of our customers. We offer: - Turned parts - Milled parts - Forged parts - Complete assemblies Small or large series