Refrigeration Equipment Factory PZL – Dębica S.A. has been active on the market since 1938. The speciality of the company is industrial refrigeration equipment. The production offer WUCH PZL - Dębica S.A. includes:  compressor sets based on screw compressors as well as single and two-stage piston compressors  units for ice water and chillers  air and liquid coolers  spray-and-evaporative condensers, vertical and horizontal shell-and-tube condensers  tank apparatus: liquid separators, horizontal tanks, inter-stage coolers, economisers, oil separators, dryers  refrigerating valves: cut-off, non-return, control, three-way, safety and pressure gauge ones as well as level gauges, filters and breathers  cooling and refrigeration tunnels for fruit, vegetables and poultry  refrigerating systems, cold stores and complete refrigeration plants  cooling equipment for mining industry In the production offer, there is also:  equipment for LPG gas: compressor units, valves, filters. In addition to manufacture of equipment, the company also provides production services. The full scope of offered services includes: making of steel structures and machine parts, machining, welding and gas cutting, plastic working and heat treatment. The offered equipment is designed for:  food processing, among other things industries of meat, poultry, dairy, brewing, fruit and vegetables  chemical industry  plastics processing  shipbuilding  mining Equipment manufactured by WUCH PZL - Dębica S.A. is working in a number of enterprises in Poland and abroad. The kind of run activities covers: technical counselling, designing, production, assembly of refrigerating systems, guarantee and post-guarantee service, overhauls and modernisation of used refrigerating systems, refrigeration training courses for customers and users of industrial refrigerating equipment. WUCH PZL - Dębica S.A. employs highly specialised technical staff and implements new technologies, thanks to that it guarantees the high quality of manufactured equipment and services. Many years of experience, co-operation with research centres, own design and construction offices as well as extensive technology and production back up facilities make it possible to manufacture products of the highest standard. Since 1998 the company has had the ISO 9001 quality certificate. Since 2005 the System of Quality Management has been certified for the compliance with the EU pressure directive. The equipment delivered on the market meets requirements of European Union directives and is marked with the CE mark.

Progresas, AB produce welded / assembled production made from carbon sheet and tube steel. Our main work consist of carbon steel preparation and finishing processes such as metal cutting, bending, carbon steel plate rolling up to 16 mm, MIG/MAG and flux welding, blasting and wet dyeing. We specialize in sheet metal processing from 2 to 35 mm thickness. We do not specialize in massive production where is necessary CNC turning, CNC milling, though we have turning and milling machinery. We make small amounts of stainless steel constructions for the prime customers, also. Progresas AB produce: 1. metal constructions for machinery, agricultural and building industry, industrial heating boilers, containers etc. 2. cylinder metal constructions 1 – 16 mm sheet thick, up to 6000 mm width., up to 20 tons weight. e.g. horizontal cylinder tanks according to EN 12285 according to the certificate for oil up to 100 m3. Production is temporally canceled by stamping metal fastening and furniture fitting items, radiators on presses in pressure range 40 – 800 tons.

Mechanical engineer Mario Taenzler founded the company TMA GmbH 2004 quite deliberately in the area of high-tech location in Dresden. His intention was aimed and aims still from it, to be composed from a pool of skilled workers a highly motivated team. Our 18-strong team is characterized by the curiosity to new challenges and is not afraid of problems, in solving all their commitment and technical know-how is required. The flat hierarchy allows a strong interaction between the manager and his staff, so that we can respond flexibly and promptly to customer inquiries. TMA has a machine park of the latest generation and is thus able to respond individually to the needs of its customers. The company does not produce a commodity, it manufactures a wide range of specialty products from the plant and mechanical engineering. We are happy to give you some selected industrial partners who have optimized our product benefits their processes and thus can offer their customer base more effective solutions. Regardless of our far beyond the countries borders of Germany, renowned customer base that on 15.01.2007, awarded by TÜV Süd certification certificate according to DIN EN ISO 9001 the TMA GmbH confirms an effective and standard-compliant quality management. We supply CNC milling parts or record. Ranging from simple drawing bishin parts to complex simultaneously milled contours.

Wittbecker & Birkmann Our company is a modern and dedicated manufacturing facility, which is located in the industrial area Schnathorst and transport links providing easy access. We carry general metalwork with a focus on sheet metal processing in individual productions as well as Großseschliffrien for the industry. Wittbecker & Birkmann was founded in 1991 by Rainer Witt and Klaus Becker Birkmann. The two-man operating a modern medium-sized company has evolved over the years. In 1999, the operation moved into the industrial area Schnathorst. We started with a building area of 1500 m², in the fall of 2004, we have once again grown and now have a production area of 2400 sqm. Production The operation of the process begins with the structure. This is you - provided, or we turn your ideas with cutting-edge 3D software - our customers.Where we are also happy already in the design phase are with our many years of experience. The next step is flat processing: From the green sheet, the blanks are cut out. This is done in the simplest case with scissors. Once outside contours, drilling patterns or transformations to come, with the laser or punch. When Combined machining the respective advantages of stamping and lasing are intelligently linked. If necessary, we can now provide the workpiece with a surface finish or remove any machining marks, burrs and oxide layers. The mechanical machining such as CNC drilling, cutting, grinding and rubbing thread is fitted as required in the production process. The Abkantarbeiten required to be completed with the help of modern CNC-controlled machines. To join, we use the usual welding processes, as well as rivets, bolts, soldering, etc.one. Since we manufacture not only items, but also complete assemblies, you can buy from us your product from a single source. For surface finishing are our competent partners, the coat your parts powder painting, zinc galvanize, galvanize and fire can anodize.

Emerged from the Dreschma Maschinenfabrik was founded in 1854 as the CA Klinger Maschinenfabrik in Stolpen near Dresden, the company was nationalized in 1945 and part of the combine operation progress harvesting machines. After the political changes in Eastern Germany, the company was founded in 1993, privatized by Mr. Eckhard Kröhnert, father of the current managing director and Maschinenfabrik GmbH Stolpen emerged in its present form. This tradition has our company today has a great poten-tial in machine and vehicle construction. Qualified employees meantime with a modern, high-performance and versatile machinery tuned to the general machinery and commercial vehicles. To respond to the needs of our clients from different industries to develop complex solutions and implement high quality, we understand as a fundamental part of our company philosophy.

Special purpose machinery, apparatus, part- systems, complete systems and contract manufacturing. Welding construction up to 20 tons, machining length up to 10,000 mm Mounting height to 7,000, 20 to single- piece weight.

Quality and performance you require? Modern systems and expertise fundamentiertes, always guaranteeing the quality of work-in the short term and on time. We can provide a reliable partner of leading companies every day to the test. In 37 years of independence, we have managed to gather a wealth of experience in the fields of metal and coating and to realize. Give us an opportunity to convince your business.

For over 30 years, MTS Martin Schnee Metalltechnik has focused on the customer. We specialize in modern sheet metal production and the production of welded components. With our qualified team and modern machinery, we guarantee products that meet the highest standards.

• Part-production according to drawings or customer specification • Assembly of parts to complex assemblies • Commissioning including functional control of these assemblies

We began operations in 2009, the capital is fully private, company being a family business. The vision that drives us is providing well thought products and services that can satisfy even the most demanding requirements of our customers. We believe we have achieved it. In the years since the beginning, our main goal is improving us and the quality of our products. We can achieve this by investing in infrastructure, equipment and, most important, in our staff. Everything we have done until now was only possible by building a synergy with our customers.

Welding services in the areas of: -Pipeline construction -Steel construction -Plant engineering -Underground pipeline construction -Repairs -Hard orders (tanks) -Contract welding -Deposition welding -Assembly -Cut Manufacture of pipes and distributors The procedures -Wig (processes 141) -Mag (process 135) -Mig (process 131) -Cored wire process (136) -E-hand (process 111) materials -Steel -Stainless steel (CrNi) -Aluminum -Titanium -Cast

We are a pipe and wire processing company and vearbeiten stainless steel, steel, aluminum, brass, etc. according to drawings or samples. We are a welding company with manufacturer's qualification "B". We weld MIG / MAG and TIG by hand or with our robot, in addition we have a Hartlöterei. To our operating facilities include: - Various metal cutting saws as well as a Rohrsägeautomat concatenated with a Bürstenentgrater - Welding robot - 4 piece CNC bending machines, bending up to Ø 80 x 2.0 - Gewindeautmaten, male thread to M 52 internal thread to M 27 - Punching, drilling, shaping with various machines - Pipe End - Own fixture With our partners we are able to supply all surfaces in the area.

Metal Sebastian Schoenfelder is a reliable and competent trade partners for private and business customers. In compliance with your wishes, the correct choice of materials as well as other important factors that I create or plan that suits you offers tailored to your project. For a taste I like to offer views in 3D. Enjoy the welcome and benefit from quality with sustainability. Metal Sebastian Schoenfelder your trade partner for metal - Custom railings, gates and fences made to measure - Locksmith & Wrought iron - Small sandblasting and minor repairs So that I can provide you with a suitable offer, please contact me for further details or request an appointment for a site visit. Metal Sebastian Schoenfelder Garden Street 2a 08309 Eibenstock Mobile: 0152/22 67 39 91 info-mbs@t-online.de Fax: 037752/3804 www.mb-schönfelder.de

Industrial technology, mechanical engineering

We are a medium-sized company specializing in electric drive engineering. Since 1927 we have manufactured and delivered electric motors and transformers. Our product and service range includes the production and customisation of motors in stock on short notice and the project-related manufacturing of motors. In this context, we see ourselves primarily as a service provider with the capacity to realise tailored product solutions within very short periods of time. As a medium-sized family business, we are proud to set ourselves apart from the rest of the field by virtue of our high-quality engineering, our outstanding service, and our stock-keeping concept. This enables us to respond flexibly and, above all, quickly to customer needs at any time. The corporate values we have committed ourselves to include quality, flexibility, and reliability and we encourage a self-reliant and result-driven approach in our employees along with dedication in every sense. For more than 90 years, this has helped us win the trust of countless customers around the world.

The BLG srls manufactures steel wire-mesh grids in all geometrical forms and shapes for a wide range of shelvings end exhibitions stands for industry and trade. Production is mainly on bulk contract-basis as well as costom-made supplies. the Blg 's wire-grid products are directed to producers and suppliers of paint brushes, metal furniture, shelvings and exhibition stands to sales outlet of all kinds and sizes. Diameters used from 2 mm to 10 mm

Production and installation of industrial plants. Pipeline construction, steel and metal construction

Precision turned parts and Fräsbauteilelieferant, job shop almost all materials including surface treatment process and heat treatment processes. We manufacture mechanical assemblies, devices and machines with very large potential for value creation, Problem solving as a "comprehensive package".