AUTOMAC is your partner for innovative and reliable solutions in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet and in the field of contract manufacturing. We ensure that you get technically perfect equipment so that you can produce cost-effective and reliable. The benefits for you ● Design according to customer services. ● Maintained and tested machinery and equipment. ● Competent advice. ● Cost produce by cheaper investment. ● products with high quality standards. ● Meeting promptly manufacture of our products. ● Installation, maintenance, commissioning and service Services for the end user: ● Design according to customer services ● Plant ● Steel Construction ● Welding ● Samples and Sonderbau ● serial production ● cooperation in product development Contract Manufacturing: ● Turning, milling and drilling ● installation work ● welded assemblies ● coloring NEW! Flame cutting Service / burnouts plasma / oxy fuel cutting machine up to 150 mm thickness. Work table 6000 x 2000 mm Plasmamakieren, plasma graining possible. Welded assemblies, welding technology Reparaurdienst. Sandblasting of the modules / burnouts! Large suitability proof! Cabinet: We design, build and install cabinet systems in different designs according to the specific requirements and operating standards of their customers from the mechanical engineering and plant construction. The spectrum ranges from small control panels or panel to the simple cabinet to large cabinet lines - from the PC cabinet enclosures for up to big benefits. All procedures during project planning and production are subject to continuous quality control. Each cabinet is tested prior to delivery in accordance with the relevant national and international standards and wired to desire location worldwide and put into operation. Our products As a provider in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet, we offer a wide range of products and services. The products listed below are representative examples of our product portfolio dar. We develop customized solutions for you. Talk to us! ● Plant for the precast concrete industry ● conveyor and picking ● Milling Machines ● Handling Systems ● Lift Tables ● Storage Systems ● Presses ● Test Stands ● Welding and special devices ● Heavy load handling equipment (cranes) ● Vacuum lifting equipment ● Separation systems ● equipment for foundries ● Wrappers ● Special Machines ● Steel Construction ● Contract Manufacturing ● Service Services ● Control cabinet

Metz automotive is active in the fields of - machining - tube machining - stamping - tooling and fixturing. With our highly motivated staff, we are able to react quickly and individually to customer inquiries.

We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.

With outsourcing a success The CNC DYNAMIX AG specializes in the milling of medium to large parts. The company CNC Dynamix AG is a service provider in the field of CNC milling services for metal and plastic model making materials. Our main idea is to focus on a core competency. The "outsourcing" of production processes in place its own investment makes sense only if a competent and flexible partner is present. This claim, the CNC Dynamix AG wants to meet. Our ultimate goal is to deliver the required quality you time. Since its founding in 1999 CNC DYNAMIX recorded a continuous solid growth. By customer segment from the modeller to space travel a considerable know-how could be established. By consciously on its own products, a competition with the clientele is avoided. Try our flexibility.

Emerging from a locksmith, founded in 1946 in Wattenbek (Schleswig-Holstein) has the Henning Dierk machine and Appparatebau GmbH due to the constant development and expansion of its manufacturing technologies over the years to become a powerful medium supplier for sheet metal parts / metal parts and assemblies mounting developed, as well as competent and reliable partner, flexible now divided into two production sites. To produce high quality sheet metal parts and assemblies a team of experienced and motivated employees is at the Henning GmbH Dierk next to a modern machine park requirement. The long-term and clear corporate philosophy helps that customer requirements are fully met in close cooperation with our customers and suppliers. In the center of all our activities for decades is the customer and their satisfaction. Our aim is to offer cost-effective solutions for our customers, thath short manufacturing and delivery times, a fair price / performance ratio and a consistently high quality of production. This is exactly where our strengths lie. Take advantage of it! We look forward to your projects. We supply to customers from different industries such as - Machinery and equipment - Interior Finishing - Warehouse - Ventilation and Klimabau - Electrical industry - Medical Industry - Authorities Materials - Steel - Stainless Steel - Aluminium - Copper - Brass - Plastic

Lumel Alucast is a well known manufacturer of aluminium pressure die casting all over the world. We combine successfully nearly 70-years experience with innovative technologies. We provide comprehensive solutions from designing and execution of tools and moulds, through die casting, machining, painting to assembling. Our castings are supplied in wide range of industries, like: • automotive • automation • heating & cooling • lighting • oil & pumps We have been working according to Quality Systems: ISO 9001:2015, ISO 14001:2015, IATF 16949:2016 and PED Quality Assurance System acc. to Directive 2014/68/EU.

As a contract manufacturing operation in the field of CNC machining, we are equipped with the latest CNC machines and measuring instruments. The company focuses on precision machined parts, in the area of 5-axis simultaneous machining. Production is in the numbers 1-10000, that we are moving in the typical one-off production, prototypes to small batch production. We finished with the claim precision in manufacturing in mechanical engineering, plant engineering, medical, pharmaceutical, chemical, aerospace, tooling, IT industry, defense, electronics, automotive, fuel cell research and work with various research institutes together. As a contract manufacturer, we also offer ultrasound-assisted milling (Ultrasonic). We ((Aluoxid), tungsten carbide, zirconia, carbides, nitrides, etc., such as glass, ceramic) is milled with diamond tools in the so called Advanced Materials. So far we have the following materials processed in the hard state as: Pane glass, Zerodur, variousHard metals, ceramics (Aluoxid Al2O3), zirconia, silicon carbide, silicon nitride, marble stone, granite, boron carbide, Syalon. In these materials, we also bring in thread from size M3. We offer the following performance profile: - Extended workbench - System Supplier - Technology Supplier - Milling with HSC - Milling with vacuum clamping technology - Mehrachsfräsen (5-axis-simul.) - CAD / CAM workstations (all CAD interfaces) - Wage measuring tactile until cubic 500mm, optical up to 300mm; accuracy jew 1.8 microns - Certification to DIN ISO EN 9001:2000 - Graphite machining - Ultrasonic machining With our employees - all skilled workers and almost all of their own offspring - we will work on our machines all materials such as steel, stainless steel, aluminum, plastic, graphite, Ampco, Kovar, titanium. With our already 20 years of activity, we can draw on a wealth of experience and know-how. Our customers include large-scale industry and medium-sized businesses and small craft.

We are the German sales company of the KUAN YI Group. The company was founded in Taiwan in 1989 and today consists of 7 production sites with over 2,000 production machines and 1,200 employees in Asia. We take care of customs clearance and fast delivery within a few days from our production sites.

Where is the highest quality, process reliability, smooth operation and process experience matters, develops and implements custom solutions NMH. Perfectly tailored to the individual customer requirements. With about 100 employees at its 88 367 Hohentengen we are marked by a performance-, medium-sized business culture. With qualified staff and modern technology, we ensure the expectations of our satisfied customers with our solutions. The 100 menstrong special machine and plant engineering company NMH GmbH + Co KG in 88 367 Hohentengen is in Upper Swabia, district Sigmaringen, about 30 minutes away from the Lake of Constance and adjacent to the districts of Ravensburg, Biberach an der Riss, Balingen and Lake District.

Eggerstorfer develops and manufactures test benches for numerous highly complex tasks in industry and research, including brake technology, compressors and pumps. With experience and innovative ideas, we support you right from the conception phase and work out performance data and specifications together with you. With our proven engineering process chain, we optimize the organizational workflow, make optimal use of all resources and provide our customers with transparent and comprehensible insights into the project status. Even after installation, we will continue to accompany you with training, service and maintenance and adapt your test bench to new requirements. MOUNTING CONSTRUCTION & SPECIAL PROJECTS Assembly and automation technology does not exist "off-the-shelf". Eggerstorfer's engineering process chain standardizes internal and external processes, thus optimizing the costs and time involved in purchasing special machines and special assembly equipment. Together with you, we analyse the requirements and then implement turnkey solutions based on our broad experience in the automotive, aerospace, military and manufacturing industries. MODEL CONSTRUCTION With our competence in engineering and our modern production technology we supply prototypes, small series and complete assemblies according to sketches, drawings or 3D models. Eggerstorfer successfully implements these projects despite tight budgets, tight deadlines and complex technical requirements. Our CNC machining centres, proven precision measuring technology and the know-how in demanding machining tasks guarantee the success of your project.

We from the model and mold construction J. Gördes produce since 1989 molds, devices, prototypes and foundry models on the highest level. Our aim is to provide our customers with the highest level of quality and dimensional accuracy in the form of our products in order to best support the customer processes. In this way, we create added value in the entire following production chain. In addition, we are available with our entire know-how for our customers and also bring us far beyond the actual mold making. From the very beginning, we understand our customer relationships as long-term partnerships in which we can develop together in order to achieve the greatest possible added value on both sides. The decisive factors for customer satisfaction are essentially the following aspects: • Documented dimensional accuracy • Production quality • Handling in the manufacturing process of the customers • Fast and competent advice and order processing • On-time delivery All employees are involved in the continuous improvement process to achieve the highest possible quality standards, and this ensures day after day that all the knowledge and experience contribute to the sustainable development of our products. In addition to our customers and employees, our suppliers are also part of the quality philosophy. Through long-term cooperation and continuous exchange of experience with them, we ensure consistently high quality and further development of our products. Likewise, we keep up to date with the latest technology through lively exchange with innovative suppliers. With this quality policy we pursue the following goals: • a high level of customer satisfaction in terms of the quality of our services and products. • the lasting assurance of high quality at all stages of the work process through careful planning, preparation and implementation of all necessary actions • the consistent application of preventive quality assurance measures to minimize or avoid the occurrence of errors. • securing the organizational conditions to ensure smooth and close cooperation of all employees of the company permanently. • Compliance with all customer requirements and legal obligations Our quality management is defined in a handbook and corresponding applicable documents and thus binding for all employees of the company.

The Trindo digital manufactory specializes in additive manufacturing with plastics. Technologies such as the SLS process and the MJF process make many milling components more cost-effective. We take over the analysis of your milling components up to the implementation in 3D printing.

Widmaier-Mechanik GbR has been your reliable partner in the manufacture of sophisticated individual parts and small series for over 30 years. What sets us apart: SPEED – through our 24/7 CNC EXPRESS service FLEXIBILITY - high level of vertical integration for optimal delivery capability SCHLAGKRAFT - committed and highly qualified team INNOVATION - continuous development and marketing of new products PRECISION - our drive

Our company was founded in 1949 by Otto Rimmelspacher in Karlsruhe. We are a universal oriented Lohndreherei and Lohnfräserei. In addition, we are able parts made of steel, stainless steel (V2 and V4) or special materials to weld such as Hastelloy and titanium. Dimensions: Ø20 - Ø300 mm, length up to 3 m, weight up to 200 kg, TIG manual welding, welds with a programmable TIG circumferential seam welding machine. From customers demanded extra-tests of the welds are performed externally. (TÜV, DEKRA, x-ray exams, FE exams, etc.). Furthermore, we can turn, mill and weld plastics. (Heating element sleeve welding or hot air welding). Our metal welders are TÜV - tested according to "EN 287-1141 T". We also process steps according to "DIN EN ISO 15614-1" and "QW-483", and admission AD2000 Module A1 according to Pressure Equipment Directive 97/23/EC. We are also Materialumstemplungsberechtigt for "10204 EN 3.2" At a certification according to "DIN EN ISO 9001:2008" we are currently working, we will complete this certification in the first quarter of 2011. Furthermore, we manufacture eductor and air Reisser according to customer specifications. Eductor are used for pumping water in wells, in low-lying water table. Air Reiser care in domestic water systems for a Constant air cushion in the air pressure tank. These products are designed and manufactured specifically to customer requirements, such as flow rate and head. For more information, please refer to the brochures in our download area. Our 15 employees are almost exclusively skilled metal workers who work independently and know that it comes down to it. On lathes we have conventional center lathes up to a peak height of 250 mm, as well as various CNC lathes Company INDEX to a turning diameter of 300 mm and a tip length of 1500 mm, with and without tailstock, with and without bezel. Our largest center lathe can handle rough-and-work on waves up to a length of 2500 mm and a peak height of 350 mm. Focus of our production is the production of single parts and small to medium series for industrial customers, such as nozzles and diffusers. We also manufacture complete pressure vessel according to customer specification, including flanges according to DIN and ASA. One of our NC lathes can also be operated with hydraulic shuttle chucks for housing to NW 25 or NW 32, the processing can thus be made on 4 sides in one clamping. In NC milling we have a CHIRON machining center with 36 tools and four programmable axes, the fourth axis is set up as a rotary axis. Maximum process paths X = 1600mm, Y = 400mm, Z = 415 mm. In addition, we still have a smaller machining center with 8 tools for drilling and thread to M 12 in steel. Quantity Spectrum 1 to 1,000. A CNC lathe is equipped with an automatically operating portal charging system for chuck parts up to max. Diameter of 120 mm and a maximum weight of 5 kg set.Here we can also realize larger batch sizes. For painting, we have a small spray booth. Can we have a customer, such as galvanized surface coating, not solve yourself, we cooperate with reliable partners.

Measuring gauges; encapsulation tools; special devices - design department - milling department - assemble department - measuring department - Polyurethane competence centre * measuring gauges and fixtures * polyurethan encapsulation tools * special devices (joining, glueing, positioning, covering, edge folding, aktivating ...)

We are an efficient company from Saxony with our own development and well-trained and experienced specialists in design and production. Since our foundation in 1992, the company has expanded continuously and we can refer to a large number of satisfied customers in Germany, Europe and all over the world. Convincing quality in production, extensive experience in the fields of tool making, forming processes, automation technology, special machine construction as well as apprentice training and further education are among our strengths. We manufacture mainly for the automotive and supplier industry, mechanical engineering, electronics and precision engineering, the construction industry and other industrial sectors. Translated with www.DeepL.com/Translator (free version)