The steel construction company ZPW ProWal based in the north of Poland about 100 km from Gdansk is a since 1985 established in the steel construction market operation. Our 30 years of experience gave us the idea, through our quality strong performances to make a name for themselves abroad. The first steps have already been taken there, the first orders in Germany and Norway as well. We specialize mainly in the production of steel constructions of black and stainless steel. Our services are wide-ranging and extend from small products such as handrails or railings up to Hallenskeletkonstruktionen, assemblies for steel bridges or machine frames and components. Our customers include shipyards, refineries as well as private persons. The flagship product of us is the launching appliance for free fall lifeboats that we make for some time for Polish shipyard. Our goal is to constantly improve our services and to make future-oriented. Therefore, you do not stop and please get in touch with us, we will put every effort so that the first steps of cooperation with new clients from Germany possible run properly. Translation by Google Translate

The family company with a lot of passion for precision, quality and customer satisfaction. Sirius Maribor d. o. o. (Limited Liability Company) was founded and registered in the District Court of Maribor on October 30 2003. When founded, Sirius Maribor employed 20 workers who produced equipment and technological functional units intended to customers in Austria, as well as in Slovenia (approximately 10 %). The number of employees has risen to 70 due to encouraging work results and increasing demand for our products.

Lathe-turned parts and cast parts from the industry expert Arnsberger Metallwerke is a parts manufacturer in demand in Germany and other European countries with excellent industry knowledge. Our customers are from the fittings, heatings and sanitary industry as well mechanical engineering. With conventional and CNC-controlled single and multi-spindle technology, we machine economically simple and sophisticated turned parts made of brass, gunmetal, steel, aluminum and plastics according to drawings. We produce small and large series and refine them if necessary. In our fully automatic foundry, we manufacture precise castings for pipe fittings made of gunmetal using the environmentally friendly sand casting process. We mechanically process the housings and fittings for you.

Enpro is an international specialist in product development in the packaging industry and currently employs 36 people. We are equipped with the appropriate machines for the production of corresponding system components and for turning and milling work in contract manufacturing. The result is high quality manufacturing and scheduling you can rely on.

We finished with an emphasis milling 3-5achsig, 120x tool changer, with Roboterbeladung.Einzelteile to medium series 30000 parts pa, complete machining incl hardening, grinding, plated surfaces. Focus is Aluzerspanung all alloys with all Oberflächen.Hoher control effort in parts 100%, otherwise as desired measurement protocols via 3-D measuring machine with Meßtasterwechsler. Programs on the machine and 2 programming stations with Solid Cam / Solid Works.Kunden from automotive to medical, locations BW, Bavaria, Switzerland.

Wagner Zerspanungstechnik GmbH & Co KG and its participating companies produce iron and non-ferrous metals for various industrial sectors. Main product groups are: - Milled and turned parts - Aluminum die castings - Aluminum extrusion profiles - Stamped and extruded parts It can be used for small batches, prototypes and large series.

We are innovative company with a worldwide presence with advertising products and products of machine componets. Company owned : - welding robots, - automated CNC production lines and pre-cut machines, - laser tube cutting machine, laser metal sheet cutting machine, - plazma HiFoucs cutting machine, - 3D metal sheet bending machine, - 3 axe milling machine, - turning lathe, welding machines, - stamping machines, - powder coating machine, - and other machineries. Production is focused on the development of the company's own, innovative product concepts and material techniques. The company was founded 1999 and it is located in nothern part of Croatia in Prelog (130 km from Graz, 260 km from Vienna, 550 km from Munich, 850 km from Frankfurt, 1050 km from Berlin, 720 km from Milan and 865 km from Zurich. We are specialized in processing and machining of stainless steel, aluminum and structural steel plates. Also we complete assemblies according to customer specification. Our expertise is in professional team, up to date technology and complete manufacturing process. Due to that at every stage of production we can supervise the quality and delivery time. Please copy and paste the link of our Youtube vides: Company book : http://new.marti.hr/CompanyBook/#p=2 Company video : https://www.youtube.com/watch?time_continue=16&v=7dU3Tmmy-NA Company wood section : https://www.youtube.com/watch?time_continue=1&v=e8UhgaJhWnk Company metal section : https://www.youtube.com/watch?v=eHGO9gSudn0 Space concept : https://www.youtube.com/watch?v=8CoEE6UOEqo

With a production site covering an area of 9.000 m2 FERROCAM has been supplying solutions for steel industry for handling and lifting for over 60 years, as well as offering customers CNC turning and milling solutions. Our experience has allowed us to meet a wide range of requirements by working on high performance CNC machines as well as machine centers. Our qualified engineering department checks all operations guaranteeing the best result of all the processes.

Our Company's History and Development Tometh KFT was founded in 1997 as the successor to a sole proprietorship that had been operating for five years, with the aim of providing high-tech solutions for the engineering industry, prioritizing customer needs. Over the years, we have continuously expanded our workforce and machine park. Today, we operate more than 20 modern, computer-controlled production equipment, and our team has grown to 52 employees. We have been operating our ISO 9001 quality management system since 2002, which is now fully integrated into our in-house developed production management system, supporting quality-focused manufacturing. In addition, in 2019, we implemented the ISO 14001:2015 environmental management system, reaffirming our commitment to sustainability and environmental responsibility. We utilize a modern enterprise management and MES system in production, and we have been operating paperlessly for nearly 12 years, with a strong emphasis on digital systems for data collection and statistical analysis. Our goal is to achieve robotic machine servicing for medium-batch production (1-500 units) and to implement robotic shop floor logistics. We already have operational divisions in this area, supporting efficient and innovative production. Through technological developments, we have also established the conditions for manufacturing and assembling assembled units. Currently, we produce 50-100 different assembled units and over 1,000 types of parts, regularly serving about 20 clients. In recent years, small-batch assembled unit production has opened up a new, strategic field for us. We use our CAD-CAM systems not only to support our own manufacturing processes but also to provide design and prototype manufacturing services for our clients. Our goal is to offer long-term, value-added partnerships to our customers through our modern technological expertise, contributing to their competitiveness and success.

The company was founded in 1954 by Walter Fischer. At that time they had focused as a supplier to the manufacture of precision turned parts as per drawing. In order not to make some customers as a supplier dependent, it has created another mainstay "Cable Glands". With the latest technology and trained staff we are well positioned for the future. Decades of experience has brought a competitive know-how of the company. Additional investments in machinery, quality assurance measures, as well as training strengthen the market position even further. Our company is certified according to the guidelines of ISO 9001:2000. Our warehouse offers an extensive range of metal and plastic fittings and fittings required.

We are a company with more than 100 employees in Velbert - the city of locks and hardware. Since 1980 we manufacture zinc die castings for various industries. Focus here is on the automotive and shop as well as sanitary, furniture lock and window fittings. Surface parts with various electroplated coatings as well as technical cast as one of our strengths. Because we place great emphasis on intensive customer guidance in the context of product development, we can assure a cost-effective and reliable production. A lean operating organization ensures an above-average short delivery times and a high degree of flexibility. We would be pleased to provide you with even prove our efficiency.

The company BRUNNER rotation GmbH is an automatic lathe in the Nuremberg Metropolitan Region. We finished on our CNC-long rotating machines of the latest generation complex parts in complete machining for various industries in the diameter range 2-32 mm. Our long-standing clients relate a wide variety of bushings, discs, washers, screws, shafts, axles and much more with us. We produce from small series of 500 pcs. up to large series. We process steel, stainless steel and non-ferrous metals copper, brass and aluminum. In the field of metal processing, the rotation BRUNNER GmbH has made a name in a variety of industries. Are complemented our services through the common heat treatment methods, as well as the best known methods for surface coating, such as galvanizing, nickel, etc. These works Brunieren our long-term partner companies do this for us. Through our long history, we have a vast wealth of know-how in the area of the rotating cutting, which we use for our customers' products. Through the use of CNC lathes, it is now possible to complex parts with cross drilling and threading, chamfers, etc. produce. This production is based solely on parts according to drawings of customers, a dedicated product line does not exist. Also, the right to quality is written of course big in our house. So we can with our optical measuring machine your parts-contact, high-precision computer-controlled and measured and you settle upon request a test report, among other things. With the help of this device diameters, lengths, radii, angles, roundness, carousels can be measured with high precision computer controlled and also to complicated external contours, etc.. Through the family ties with the company, the bureaucratic and lean organizational structures and the high motivation of employees, our customers can rely on our company. Should you also have products that fit into our production possibilities described above, so contact us and test us. We are ready!

we offer machining of all types of metals and plastics on the 3-axis Deckel Maho machining center, on which we are able to produce products up to 1100x550x400 mm with an accuracy of +-0.01 mm. We offer services from the purchase of material, cutting, machining to various surface treatments that we can provide.

Since 2013, the company offers BK-Metallbau GmbH as small business to their services. We manufacture a system supplier with the highest standards in the field of mechanical and plant engineering, focusing Dryers for sawdust. Our strength are also welded assemblies of all kinds that we also with modern welding machines in Trans Synergic MIG MAG method and TIG process. By own welding engineer We offer our customers welding technology with the highest degree. Our construction office qualified Auto CAD draftsman are always at pains what planning and Drawing technique relates to support our customers. For a necessary heat and surface treatment are of course proven Partners in the areas of painting, galvanizing and powder coating. We process your request as quickly as possible, and are also willing to visit locally. Translation by Google Translate

We produce turned and milled parts in single and serial production. Highest quality and manufacturing precision is our top priority. We have specialized since our inception in 2002 to the production of parts for the robot and the press manufacture. Through our highly qualified staff and modern machinery, it is possible to take us to accommodate special requests our customers.

Favi S.A. is the biggest suppplier of components for copper alloys in the world

We are a medium sized company in the Dresden area. We offer jointly with a partner company assemblies and installations of orbitally welded stainless steel pipes and stainless steel components. Additional over we also take CAD-based design and planning of assemblies made of stainless steel of all kinds.