1956, the company was founded by Master Ferdinand saver savers then led Konrad saver on. 1998 | the company was transformed into a general partnership with Hannes & Gregor savers and has since steadily increased for new workers. Currently 11 people are employed. In addition, the company is in a second production line - the vehicle - entered. 2000 | A new headquarters was built so that even large orders can be made easily (1000 m² production hall and 1,200 m² open area). 2003, the company has repositioned itself and an internal division of duties performed: savers Hannes took over the management of the company, the technical office and production, savers Gregor assembly. 2010 adopted the SAVE GMBH all the work, the technical office is expanding, acquired in April, the SOA records and since September 9001 ISO: 2008 certified.

Technology + Research & Development for a 100% “Made in Italy” Supply Chain A 100% Certified Italian Supply Chain which, since 2004, has been awarded the ISO 9001:2015 Quality Management System Certification followed by the BS OHSAS 18001:2007 Occupational Health and Safety Management System Certification, because the ‘Quality of the Product’ goes hand in hand with the ‘Quality of Life’. The strong attention to the ‘Details of Quality’ will lead F.lli Perin to also obtain the MOCA Certification, which guarantees processes that do not transfer to steel substances that are dangerous to human health or that could compromise the organoleptic quality of food. But the new frontier will be the Green Economy, where words such as Sustainability, Environmental Impact, and Energy Efficiency, with the acquisition of TEE Securities, give an idea of a new, imminent success. It all started in 1960, when Giovanni Perin, armed with knowledge and experience in the sector, decided to start his own business and soon became the reference point for that ‘Industrial District’, the Inox Valley, which in the meantime was developing in Veneto, between the provinces of Treviso and Belluno. Today, in its third generation, F.lli Perin srl is a world leader in the processing of stainless steel for the production of components for large systems in the Ho.Re.Ca., community, industry, and furniture sectors. A success story for a company that is capable of combining the experience of the ‘founder’ with research and technological development, paying special attention to relationships and guaranteeing a 100% ‘Made in Italy’ supply chain. Research & Development are fundamental because they allow us to have a competitive advantage through products and processes projected into the future, but it also means acquiring suitable tools. F.lli Perin, with a program of 2 million euros of investments in the last 2 years, now has cutting-edge equipment, including a Mitsubishi Fibra laser with automatic loading and unloading of the latest generation, for an even greater reliability of production. Why choose F.lli Perin? Because from the ‘Certified Italian Supply Chain’, to ‘Research & Development’, to ‘Continuous Improvement’, up to the affirmation of a ‘Strong Global Personality’, F.lli Perin has established itself on the international market with recognized competence and determination. A company history that, over the turn of two centuries, has translated into a management of the highest specialization and motivation capable of governing a dynamic technological system always aimed at the total satisfaction of the design needs of customers while also developing and proposing new ‘technological concepts’ like the new coloured surfaces that combine strong aesthetic appeal with the usual consistency and reliability of traditional stainless steel.

Garic Engineering GmbH has extensive know-how in the development, design and manufacture of innovative products. We would be happy to support you with our expertise from the first idea of your project to the finished component.

Natec is your partner, from development to series! Both large corporations, as well as growth-oriented Mittelstaender. Whether the market leader in the industrial or service, or those who want to be. Our clients come from all sectors of the economy. In order to meet the current needs and demands of the market, we can provide tailored solutions for your business. We take care of the complete supply chain: planning, procurement, quality testing, warehousing and transportation. For years with much success, as our ever-growing customer base proves. As a service provider with its own production and development, we have the know-how and have the right partner for cost-effective procurement and flawless logistics. The basis for the positive development of recent years is the interaction of these flexible partner and our motivated employees, the resulting rapid Arbeitsablaeufe, a competitive pricing strategy, and of course the central storage at Natec. Our production partner here in Turkey are medium-sized family, far from the expensive and congested mass manufacturers. We know our partners for years and appreciate their design and manufacturing expertise. Through a comprehensive supplier management system is at all times the best supplier opted and appointed for your product. These are continuously tested for quality, delivery and price down. We and all of our manufacturing partners are ISO/TS16949 9001:2008 or DIN ISO: 2009 certified. You always have the possibility here to visit the production facilities in Turkey and to form a personal impression of the technical equipment, processes and working conditions in the respective producing for companies. Your benefits at a glance: - Reducing your supplier through Central Shopping on Natec - This reduction in the planning and control effort in your purchasing department - Cost optimization through market-based purchasing and delivery by bundling - Providing the highest quality in accordance with DIN ISO 9001:2008 / ISO / TS 16949:2009 - 100% delivery performance through warehousing - Short delivery times The satisfaction of our customers is our top priority, so us a trusted and personal contact is so important. Contact us for your strategic partner in Turkey!

Technical Trading Dreh-/Fräs-und for sheet metal parts

We have been manufacturing high-quality precision parts, cable assemblies, stamping and pressing of plastic since 1990 Materials: steel, stainless steel, aluminum, brass, bronze, copper, plastics Flexibility and reliability form the basis of our actions.

Our modern manufacturing techniques - your competitive edge! The PAULI Aquatec GmbH is a young and ambitious company based in Fürholz, community Grainet (Bavarian Forest - about 15 km from the Czech border). A modern production facility with well erected machinery and highly motivated, permanent trained staff set us apart. Through the pioneering use of high precision and CNC-controlled waterjet cutting system, almost all materials can be cut. Our facility is equipped with four cutting heads and a changing table - so we are in the area of small and medium batch production unique in our region. With the double face grinding technology and special materials can be ground simultaneously precise in addition to conventional materials on both sides. This allows us to offer you an optimal solution from the water jet cutting loops on the way to deburring. We offer: - Water jet cutting - Double face grinding - Surface grinding - Centerless cylindrical grinding - Trowalizing - Measuring and testing

We are located in Bulgaria, Sevlievo town. We are company founded in 2006, specialized in manufacturing of assemblies, units and components from ferrous and nonferrous metals, for energetics and engineering. Our traditions in cold treatment of metals date back in 1962 as we were part of the mechanical production of Avangard factory, later part of ABB Group. From 2012 the company has moved in new manufacturing premises. At 8,000 square meters production area of which 2800 square meters built edifices is situated a large machine park, divided into two sections: - Preparatory press-welding and cutting area with a band saw machines, hydraulic and eccentric presses, guillotine, punching center, gas cutting machine, welders and others. - Mechanical department/stretch of lathes - universal and CNC, milling machines - universal machining centers, CNC drilling machines and Gear Cutting machine, broaching machine, slotting machine, etc. Frames, supporting elements, housings, rotary and prismatic parts, spur and worm-gears, parts with complex configuration are produced by the company. We use steel, iron, chromium, nickel, aluminium, copper, brass, etc.. materials. We produce units and details based on drawings or specifications of the customer and we can also offer additional services such as oxidation, hot-dipping and electrochemical galvanizing, anodizing, tinning, tempering, silver plating. The entire production process is subject to the requirements of the system of quality management ISO 9001:2015. We are always open for new projects and stand for serious and honest business relationship. We are looking for contacts with new partners and we are willing ti establish long -term cooperation.

CNC TORQUE * CNC MILLING MACHINES Turned parts, milling parts from Lutex: Low-cost. Durable. Reliable. Dear Ladies and Gentlemen, Company Lutex manufactures parts quickly and economically just-in-time: according to drawing, From prototypes to series, from CNC turning parts to CNC milling parts. Qualities with which I convince: • High flexibility, even with short-term inquiries • Reliable customer service: from quotation, through to production and delivery • Cost-effective production with high quality The accompanying company brochure gives you an impression of my performance spectrum. One, I hope, positive impression, which I at a personal discussion or equal at A first order. You will find conditions on request immediately. CNC machines: CT 20 Gildermeister - turning D180mm L = 250mm / small series from 30 to 10000 pieces NEF480 Gildermeister - turning D480mm L = 1000mm CNC strojtos - milling - x = 500 / y = 320 / z = 360mm Lathe new - D500 / L1500 Gallery realization on: www.lutex-metale.eu Best regards, Lucjan Bulenda

Since 1997 our company serves to its customers in the sheet metal industry associated with perspectives such as high level of quality, flexible solutions, and rational price strategies. We have strengthened our corporate identity by using the advantages of innovative, flexible, and success oriented management style. Making accurate investments at the right time turned our company into one of the companies who is well known and admired in the industry. The company is based in Istanbul Beylikdüzü Industrial Area in 5.500 meter square production field. By using its experiences, corporate structure and flexible solutions Sarimet exports sheet metal parts to FRANCE, ENGLAND, GERMANY, SWEDEN and SWITZERLAND for more than 8 years. By using CNC Laser Cutting, Punch Cutting, Bending, Profile Bending, Roll Bending, MIG and TIG welding, Profile Cuttings, Perforated Cuttings, Guillotine Cuttings, Assembly and other sheet metal processing tools, we can supply a lot of services to our customers in just one place. Reviewing the current customer portfolio, we can define our basic customer identity as Machine Producers, Industrial Shelf Producers, Server Cabinet Producers, Elevator Producers, Industrial Kitchen Cabinet Producers, Automobile Suppliers, Industrial Air Conditioning Producers, Rack Cabinets, Personal Safe Producers, Metal based Storage producers and so on, As a consequence of high level experiences that have been accumulated since its foundation, Sarimet evaluates the expectations of its clients correctly. We make difference for our clients who have top-end demands from its supplier. Today Sarimet continues its rapid progress by a vision that takes into account of the deficiencies in its sector. As a company who attributes its success into its clients, we are working harder in order to answer your demands by high quality products, appropriate prices, and quick services which are hard to find in one place. We would be glad to do business with you in order to satisfy your challenging expectations.

Heggli & Gubler Metalldrückerei AG - Your partner in the high-tech sheet metal forming ... Our strength lies in the forming of sheet metal by metal spinning. Through the expertise of our experienced staff, we are able to offer you to produce prototypes, single or special designs. On our pressing machines we produce smaller or larger series kostengünstigst in the best possible quality.

We are a family company, founded in 1927 in Bologna, the heart of a mechanical and motors region, and specialized in the constructions of mechanical components following customer drawings. Thanks to our web of Italian partners, including high quality aluminium and cast-iron foundries, we can offer a “Turn Key” service, starting from the purchase of raw material until the supply of parts ready to be assembled. We also care about heat or surface treatment and painting. We manage internally dimensional controls, eventual leaking tests and certificates raising. We already work with international groups as Toyota, Alfa Laval and General Electric, on different European and American sites. Please do not hesitate to contact me for any further question You may have, we would be happy to receive Your drawings for any quotation or to have the possibility to visit You. Thank You again for Your time and Your attention.

The company TIGEMMA, spol. s.r.o. has been active in the engineering sector since the early 1990s. It is primarily engaged in manufacturing machine parts and providing engineering services. Its own manufacturing program is focused on the area of industrial filtration, exhaust systems and material extraction tables for CNC cutting machines. In addition, we offer products and services in the field of processing refined materials such as aluminum alloys and stainless steel. These products are delivered in superior quality finishes thanks to producing them with modern, sophisticated technologies. A comprehensive manufacturing park makes it possible to ensure the manufacturing process, from shape cutting, bending, blasting, and painting the material to road transport, is integrated. MAIN MANUFACTURING PROGRAM • FILTER AND EXHAUST EQUIPMENT • MATERIAL EXTRACTION TABLES FOR THE THERMAL CUTTING OF METALS • SUCTION TABLES FOR WELDING • FANS • PRESSURE VESSELS • STEEL STRUCTURES • SOUNDPROOFING HOUSING FOR ELECTRIC GENERATORS AND PUMPING EQUIPMENT • FOOD INDUSTRY EQUIPMENT • AUTOMOTIVE INDUSTRY EQUIPMENT • TEXTILE INDUSTRY EQUIPMENT • MINERAL PROCESSING INDUSTRY EQUIPMENT

Metal Locksmith Jelinek GmbH is a modern, machine-planning family. Seat and operation of the company, we have in Ivancice at Brno. Today we have 30 employees. We deal with the customization products of machining and metalworking parts, we also do various lineups including installation, single-purpose machines, forming and cutting. For all products, we guarantee a complete service - ie the construction (in the forming and cutting), supply of material, production, heat processing, surface treatment, assembly, inspection, measurement protocols and also transportation.

The Binder GmbH conveyor system is a flexible family business, designed and implemented since 1971 with innovative ideas individual solutions. The company offers the entire range of services to modern materials handling and care of you even after commissioning of the plant. The service starts with the design, via design, manufacture and installation of complete production facilities to production of special machines and training the customer's employees. Furthermore, the Binder also performs the expansion and modernization of your existing system. The approximately 60 employees / inside are all experts in their field. Because of the efficient structure within the company, we are able to react flexibly to your requirements and to achieve best quality at high delivery reliability. For optimal order processing. Furthermore, we do contract manufacturing in the field of welding, Machining and turned parts. For solutions on the move.

- sheet metal processing Cutting and folding up to 3 meters in length and 5 mm in thickness Manufacture of metal cups up to 100 mm high - profile bending Profiles made of steel, stainless steel and aluminum using a 3-roller ring bending machine - welding Steel, stainless steel and aluminum up to approx. 10 mm thick - saws Profiles up to 350 x 230 mm and tubes up to 270 mm in diameter - Rotate Steel, stainless steel and aluminum on a conventional lathe

The young company Biltec AG is a reliable and competent manufacturer of precision mechanical precision parts. BILTEC AG has a modern and technically advanced machinery for the machining of metals and plastics. Thanks to precision, innovation and reliability Biltec has made a reputation in various categories, but also in the optics industry not only in general engineering. Biltec AG is focused on the production of: • Standard parts • one-offs • Prototypes • Modules Biltec AG also provides support during the design phase for mechanical machined parts. We also perform construction work on behalf of customers through independent, if desired by our customers.