The company Unruh Maschinenbau was founded in September 2016 by Elix Unruh as the owner. The range of services included the contract manufacturing of various milled and turned parts. In August 2017, the company Jansen & Bahlo GmbH in Bad Salzuflen, which had been operating successfully in toolmaking for decades, was taken over. The merger of the two companies resulted in Unruh Maschinen- & Werkzeugbau. With the takeover of the toolmaking company, we were also able to gain very well-trained specialist staff with decades of experience. In the short time, our company recorded very good successes, so that we now employ eight people.

SPANPOWER CNC Precision Parts is the manufacturing specialist for high-quality CNC-manufactured components and assemblies. With our modern machinery, we produce prototypes and series. Our services include CNC turning and milling and wire EDM. Customer-specific surface treatments and module assembly round off our manufacturing options. Our customers come from the fields of plant engineering, mechanical engineering, optics, automotive and aerospace.

Company founded in 2021. Milling and turning capabilities. Especially machining of aluminium, brass, stainless steel and technical plastics.

Microniq Ltd.-From design to production! Our company's main activity is the manufacture and development of custom and mass-produced components, machine elements, design, manufacture and on-site installation of devices. We try to fill our spare capacities by contract manufacturing. We are innovative, creative, precise and highly flexible!

The production of a die follows a long process: it starts with the conception of the object, moving through a process simulation aimed at studying the stamping method. Once agreed upon with the client based on production volumes and the designated presses, the design phase begins, which M.C.S. prides itself on for its precision. The manufacturing of the equipment is then immediately undertaken, coordinated by a thorough analysis of the process. M.C.S. also manufactures dies based on designs provided by the client, as is common in the automotive sector. M.C.S. specializes in the construction of dies for the automotive and home appliance sectors, but any sheet metal part can be produced by our team. You design a sheet metal product, and we will manufacture it for you. We handle single-stroke dies, progressive dies, and transfer dies, cooperating to fine-tune the part handling process. Our production flexibility enables us to engage in automatic production of both small and large series of parts with dimensions up to 3 meters, as well as in low-volume production using manual recovery dies. We rely on a team of highly skilled and experienced professionals in the field. One of M.C.S.'s unique characteristics is its advanced processing technology, which keeps the company at the forefront of the industry and ensures very high-quality standards Progressive dies:Our most innovative target Transfer dies:We aim to be a comprehensive partner, assisting the client throughout the entire process until production launch Prototype dies:When time constraints challenge us, prototype tools allow for rapid production and/or enable refinement of the stamping methodology study Milling and subcontracted mechanical processing:With our machinery and flexibility, we enthusiastically embrace the timing and technological challenges presented by the market. We have experience in the petrochemical valve sector, metalworking, and complex mechanical components AUTOMOTIVE INDUSTRY Molds for chassis framework and interior body panels Molds for reinforcement brackets, window lift guides, flanges, and mufflers Molds for components of any type Molds for thick sheet metal Molds for heat shields, including those made of aluminum MILLING MACHINE DEPARTMENT The milling machine data is summarized as follows : 3 x 3-axis milling machines with 5-face machining capability, 3000x2200 mm (10,000 rpm) 3 x 5-axis milling machines with a working area of 1750 x 1400 mm (18,000 rpm) 1 x Okuma milling machine for machining hardened steel and superfine finishes (15,000 rpm) 8 x CNC milling machines for parts up to 1600x1200 mm EDM DEPARTMENT The EDM data is summarized as follows: SODICK AQ400L SODICK AQ600L 2 MITSUBISHI MV2400R ONA BIHLER automation for the production of structural elements with steel, aluminum, copper elements

Small engineering company with its own design department.

As a contract manufacturing operation in the field of CNC machining, we are equipped with the latest CNC machines and measuring instruments. The company focuses on precision machined parts, in the area of 5-axis simultaneous machining. Production is in the numbers 1-10000, that we are moving in the typical one-off production, prototypes to small batch production. We finished with the claim precision in manufacturing in mechanical engineering, plant engineering, medical, pharmaceutical, chemical, aerospace, tooling, IT industry, defense, electronics, automotive, fuel cell research and work with various research institutes together. As a contract manufacturer, we also offer ultrasound-assisted milling (Ultrasonic). We ((Aluoxid), tungsten carbide, zirconia, carbides, nitrides, etc., such as glass, ceramic) is milled with diamond tools in the so called Advanced Materials. So far we have the following materials processed in the hard state as: Pane glass, Zerodur, variousHard metals, ceramics (Aluoxid Al2O3), zirconia, silicon carbide, silicon nitride, marble stone, granite, boron carbide, Syalon. In these materials, we also bring in thread from size M3. We offer the following performance profile: - Extended workbench - System Supplier - Technology Supplier - Milling with HSC - Milling with vacuum clamping technology - Mehrachsfräsen (5-axis-simul.) - CAD / CAM workstations (all CAD interfaces) - Wage measuring tactile until cubic 500mm, optical up to 300mm; accuracy jew 1.8 microns - Certification to DIN ISO EN 9001:2000 - Graphite machining - Ultrasonic machining With our employees - all skilled workers and almost all of their own offspring - we will work on our machines all materials such as steel, stainless steel, aluminum, plastic, graphite, Ampco, Kovar, titanium. With our already 20 years of activity, we can draw on a wealth of experience and know-how. Our customers include large-scale industry and medium-sized businesses and small craft.

We are a component supplier that provides the following services and deliverables: METAL TECHNOLOGY CNC turning & milling, welding, laser engineering, edging, punching, surface engineering PLASTIC TECHNOLOGY CNC turning & milling, welding, vacuumforming, clean-room and laboratory technology, plant engineering Our unique vertical integration, for instance in plant and mechanical engineering, allows us to manufacture everything in-house, from the base body with a metal-rack to the complete pipe work and electrical equipment, and to respond to our customers’ wishes with great speed and flexibility to ensure a maximum degree of quality, also for complex constructions.

High product quality, consistent focus on quality, motivated personnel, efficient operations: These guidelines characterize our company! So we could since the company was founded on 1.8.1998 expand our production capabilities continuously and finished today in modern office and production buildings of 3,000 sqm in 3 layers. Our quality management system according to DIN EN ISO 9001:2008 ensures our customers process safety and impeccable product quality. And for many of our customers is the incoming inspection of long past!

Turning and milling for recovering products.

Services on the basis of CAD, HSC milling and die-sinking EDM The company powerCut: GmbH is a service provider the benefits of HSC milling technology consistently for their customers. Our focus is in the design and machining of complex 3-D geometries of tool parts for plastic injection molds, parts, electrodes, small and medium series, prototypes generally, propellers, etc. The quality and reliability of supply is essentially due to the state of the art equipment and employee engagement. Established: In Berlin in 1996 Founder: Dipl.-Ing. Mechanical Engineering Stephan gardener Dipl.-Ing. Mechanical Engineering January Prescher Philosophy: Service provider in the field of product development and manufacturing on the basis of HSC (High Speed) - milling technology. Complete service from design to finished product.

We are the German sales company of the KUAN YI Group. The company was founded in Taiwan in 1989 and today consists of 7 production sites with over 2,000 production machines and 1,200 employees in Asia. We take care of customs clearance and fast delivery within a few days from our production sites.

Welcome to the Heuer precision parts GmbH in Wernau near Esslingen. Our specialty is the CNC machining of metals and non-metals. For our customers, we produce high quality parts in small quantities, prototypes and pilot series to series parts in larger editions. Again this year, we continue to invest. We have end of January 2012 took another 4-axis machining center with pallet changer 14 in operation. We offer a wide range of other services such as grinding, broaching, burnishing and honing. For edits, we can not perform at our house, we cooperate with reliable partners. The assembly in our house rounds off our product and service range. We have here a selection of stocked by us or short-relatable materials listed: Steel: * Cutting steel: 11SMn30 (1.0715, 11SMnPb30 (1.0718) * Structural steel unalloyed: S235JR (10037 / St37-2), S355JO (1.0553 / St52-3) * Coating carbon steel: C35 (1.0501), C45 (1.0503), C60 (1.0601) * Tempered steel alloyed: 42CrMo4 (1.7225), 42CrMoS4 (1.7227), * Use steel: 16MnCr5 (1.7131), 20MnCr5 * Alloyed Ni - steel: X45NiCrMo4 (1.2767), * Tool steel: 90MnCrV8 (1.2842), X155CrVMo12 (1.2379), X210CrW12 (1.2436) * Bearing Steel: 100Cr6 (1.2067), Cf53 (1.1213) Stainless Steel: * Austenitic: X5VrNi18-10 (1.4301), X8CrNiS18-9 (1.4305) * Tempered, rust-resistant, acid-resistant: X39CrMo17-1 (14122) * Curable X90CrMoV18 (1.4112) * And many more Special materials * Hasteloy * Inconel Non-ferrous metals * Aluminium and aluminum alloys * Brass * Copper * Bronze engineering plastics * PVC (polyvinyl chloride) * PP (Polypropylene) * PE (polyethylene) * PA (polyamide), * POM (polyoxymethylene) * PS (polystyrene) Hochleistungskunststoffe * PEEK and PEK (polyaryletherketones) * PI (pressed polyimides) Examples of our production parts: Adapter flange ring threaded ring gear flange spindle nut gear carrier bracket bolt shaft bottle cap workpiece special flange deflection deflection receiving sleeve socket mount cup leadership leadership idler pulley roller shaft pulley welding flange block driver clamp clamping disc hub spring receptacle lid bearing seat tightening bolt motor flange motor housing brake flange rotor cylinder tube tube cam plate gripper finger gripper

HSP Schwahlen GmbH was founded in 1945. From on 1951 the production had been focused on adapter and withdrawal sleeves being the basis of our current line. At the beginning of the eighties CNC production of goods having greater dimensions was introduced. HSP supplies all main bearing manufacturers as well as the larger distributors. The standard production range on adapter and withdrawal sleeves, nuts and locking devices is completed by optional hydraulic assistance, abnormal metric inner diameter or complete inch-sized sleeves as well as all specialties based on customer specifications. Besides this we manufacture hydraulic nuts as well as precisely turned and milled thin-walled parts. Since 2000 HSP is also manufacturing various kinds of cages for bearings from 100 - 4000 mm outer diameter in high quality, small lot sizes and variable material (brass, steel, bronze, aluminium, ...) according to customers requirements. In this segment we produce for all main bearing manufacturers. In addition to the production know-how HSP has continuously improved quality, logistics and administration. This leads to the high level of quality, delivery conditions and service of HSP. At our newly built production facility in Langenfeld, established in 2001 and in between extended several times, we manufacture with the latest technology including 3D-measuring equipment. The certification of the quality management system based on DIN EN ISO 9001 and of the environmental management system based on DIN EN ISO 14001 by Lloyd's Register Quality Assurance Limited underlines the endeavour to achieve highest possible precision and satisfaction of our customers as well as the best possible environmental sustainability. HSP product range The HSP production programme covers adapter and withdrawal sleeves, nuts and locking devices with 130 mm up to 3000 mm outer diameter and approx. 600 mm in length. Besides the standard we offer the following: • Sleeves with abnormal bores and threads, metric / inch dimensions, special materials, ... • Production according to customer specification respectively to drawings • Special surface treatment (e.g. phosphating) • Longterm packaging • Direct deliveries, global sourcing and other logistical add ons Standards of the HSP production • Adapter sleeves according to ISO 2982-1:1995 (-> DIN 5415:2009-05) • Withdrawal sleeves acc. to ISO 2982-1:1995 (-> DIN 5416:2009-05) • Nuts following ISO 2982-2:2001 (DIN 981:2009-05) • Locking devices acc. to DIN 5406 • Any standard or recommendation of customers by drawing or text Additional products Cages for bearings with complex milling and drilling processes up to 1750 mm outer diameter processed in five axis. HSP is not limited to any design according to customer requirements. Most ferrous material can be machined (brass, bronze, steel, aluminium, etc.).

We cover the market needs from design to finished product in the tooling industry, and in research and development of high technology. Our know-how in the processing of exotic materials makes us specialists in aviation and aerospace, racing technology as well as in laboratory applications. Ausgwiesenes offer expertise as in the area of injection systems for marine diesel engines and tech in electrical drive technology. As a small company we offer flexibility, fast and secure solutions, the best quality in the appropriate price level.

Designed with a 120-year tradition and produces KELLER HCW machines and Plants for the heavy clay industry as well as special solutions for logistics and handling tasks. Since 2006 KELLER is a division of the French group Legris Industries. Together with the renowned brands Novoceric, Morando undRieter making it the powerful network of companies KELLER, the world's only Offer complete systems from one source can

If >>> not - there's not Following this motto we combine for more than 15 years of production engineering for the complete machining sophisticated machine components productivity and flexibility with the help of horizontal machining center to a economic optimum. Our services include turning, drilling and milling of large, complex hydraulic components, Machine parts for large vehicles and special purpose machines. Our strength lies in the consistent use of the latest manufacturing technologies. Even turning operations of cubic parts whose processing have usually been very labor intensive to conventional lathes was, can with us on one of the BAZ through the use of combined Rotary milling are carried out completely in one setting. The hereby achieved increased process safety and significantly reduced tooling and clamping times are Benefits that we like to pass on to our customers. The connection of the BAZ to a FMS pallet rack system with 60 pallets and a total of 940 tools allows us sufficient machine pallets to store retrievable using appropriate clamping technology. Thus we are able at any time to react flexibly to customer demand absolute, even in small quantities. The slim structure of a small enterprise, 25 committed and qualified employees, a manufacturing engineering Organization at the highest level and of course quality "Made by MUZ" are the benefits that our Know how to use in long-term partnership clients. Interested? We see your inquiry on gladly!