In conversations with our customers, we are often asked where our name comes from, how it originated and what it means, because the one might also suspect in the electronics sector. Basically, that's not such a bad combination. But most plastics are very good electrical insulators and are therefore often used in the electrical and electronics. However, the name Polytron derives from the suffix "tron" the products sold by us plastics (Nylatron, Acetron, Ketron, etc.) and from the prefix "poly" as an abbreviation for "polymer" - from plastic. Actually the name is but remember our roots. Our history goes back to the fact middle of the last century. 1946 processed the Americans Louis Stott for the first time nylon, so polyamide to technically usable semi-finished and founded on this idea based his company, POLYMER Corporation in Reading, Pennsylvania, United States. As a subsidiary of Polymer Corporation, we were founded in Cologne in 1961 and were renamed since then as POLYPENCO - Polymer Pennsylvania COrporation - Society for Industrial Plastics GmbH.The history of the plastic we have thus witnessed from the earliest beginnings and also partly influenced. We do not want to so be the main focus, but it does show that we can look back on a very considerable period of experience with these yet new construction materials. And experience seems to us one of the essential factors in the proper handling of plastics to be that we in the design of plastic components such as Kunstoffbuchsen, skid plates, spindle nuts, plastic bearings (with runflat tires, suitable for dry running, gleitoptimiert), wear elements and other milling and turning parts of special and high-performance plastics, with bring. Experience and knowledge that you can fall back as our customer! But the experience is not for is eternal and so we were sold in 1999 by our former owner, the Dutch DSM NV, to the private entrepreneur Bernd Henderkott. He has understood that companies reposition without the experience and knowledge that lies mainly in the minds of employees to waste in recent years. But the name we had to change for legal reasons, so that we Plastics Technology GmbH & Co. KG operate under the name Polytron today.

Jeteprodesign specializes in the design and manufacturing of injection molds and the production of technical plastic parts through injection molding. We act as a trusted partner for companies that develop their own products and outsource mold manufacturing and plastic component production. Our clients come from a variety of sectors, including: - Electronics and industrial automation - Medical and healthcare devices - Automotive and mobility solutions - Industrial equipment and enclosures - Technical consumer goods Combining engineering expertise, in-house mold making, and flexible injection molding production, we provide: - Reduced development times - Competitive pricing - Consistent quality - Tailored production volumes Machinery and Equipment: - Injection molding machines from [130t to 300t] - 3-axis and 5-axis CNC machining centers - EDM (sinking and wire erosion) - CAD/CAM: Creo Parametrics, NX Siemens, Depocam

TREUTECH is your specialist for plastic processing from prototypes to series production. We machine technical plastics such as POM, PA, PE, PTFE, and elastomers with precision according to drawings and ensure that even complex parts are manufactured reliably. In addition to our core competence in plastics, we offer a comprehensive sourcing and manufacturing service. This includes CNC parts made of steel, stainless steel, and aluminum, C parts, assemblies, 3D printing, as well as further subcontracted manufacturing services. As your supply chain partner, we support you from inquiry to delivery with efficiency, flexibility, and cost optimization. Our international network ensures that you receive everything from a single source.

Manufacture of teaching aids, assemblies, milled parts, turned parts and plastic injection parts. Design - manufacture - assembly.

We specialize in the production of special ball bearings, Gleit-/Laufrollen, complete carriage units, extruded parts and balls of steel. We are also manufacture plastic parts as a spray or rotary parts in the situation.

In the precision engineering, we are the right partner for your pattern and prototype manufacturing. Whether prototypes contact parts or semi-finished products - we make your wishes for different industries: automotive and electronics industries as well as home appliances and communication technology. In addition, we are using our products in important sectors such as hybrid and solar technology represented

The HERR Company founded in 1989 located on an elevation of 1.000 m in the Black Forest next to the Triberger Waterfalls, West-Germany. For more than 25 years we produce high quality technical plastic parts. Our main line is flame resitant products for the electric industrie. We also produce parts for the German premium automotive, clock industrie, and special gear boxes. Our Team with 15 employees and 30 injection molding machines produce every year millions of parts.. We can offer you a solution from your idea over the molding tool to the finshed product.

MRE - PHN is a French group specialized in plastic injection (PP, PA, POM, ABS, PC ...) and overmolding (Rubber, PVC, Elastomer ...). Our two production sites in France and Romania produce and deliver our customers all over the world. We cover all the process from design to delivery since 1908.

Model Cooperation based on trust, speed and fair prices - at these maxims is oriented the actions of fm group of companies. Particularly important are us close to our customers and their 100 percent satisfaction. Therefore, we regard it as self-evident, that is "the boss himself" in direct contact with business partners. We also make every effort to limit our delivery times to a minimum and have to be here the competition in the truest sense of the word a step ahead. The conscious use of raw materials in our production, we are not only our ecological responsibilities, but at the same time keep the prices at a low level - and steadily improved the quality of our products. As a family we also attach great importance has always been a responsible and collaborative partnership with our employees.This includes moderation in growth to secure jobs as well as the development of individual skills. Production Continuous monitoring and the use of our strict quality management give us and you the necessary security. The products are tested and receive the GS mark. fm office furniture are characterized by their high quality and their particularly good value for money. At our office furniture and office furniture we offer a 5 year warranty. For the production of our office furniture, we use only high quality wood-based panels E1 grade. The processing is done on modern CNC-controlled production facilities. fm offers from consulting and planning through production to delivery and installation of a holistic system. Power spectrum * Complex technically sophisticated products * From prototyping to mass production * Economic Planning and Production * Low tooling costs * Flexibility * High tech 3D Constructions * CAD / CAM * Tool - Model * 5-axis milling * Expertise * Size One * Ability to cooperate * On-time delivery

We are Pecho, a company with a fifty-year tradition, founded in 1968. We are active in the manufacture of cables, the production of components for the automotive, agricultural and electrical industries, and in plastic injection molding.

SRFAM is a Portuguese manufacturer of plastic injection molds, founded in 1996, initially providing mold manufacturing services, then with service notoriety and increased work, began to build complete injection molds. We count on a highly qualified team, oriented to the continuous improvement, rigor and fulfillment of objectives that seeks to innovate with the support in adequate technological resources, presenting the best solutions to continuously guarantee the precision, rigor and high quality of the molds that we manufacture. We are specializes in small and medium sized tools (1k and 2k tools), with high complexity and tight tolerances.

We have been working closely with our customers since 1985 to develop customised injection moulded parts and assemblies. From development and design to finishing and the final product, we fulfil the specific requirements of our customers. We are proud to be a leading manufacturer of high-quality polymer moulded parts and at the same time fulfil our responsibility to the environment. Our development results and products can be found in all premium vehicles worldwide and we also have an excellent reputation in the heating and hot water industry. We have been an owner-managed family business since the very beginning - this makes us independent and dynamic. We maintain long-term relationships in the market and are a reliable and stable partner with more than 700 employees.

AV Consulting founded in 2008 a division dedicated to INDUSTRIAL DESIGN RAPID PROTOTYPING, LOW VOLUME PRODUCTION, SERIAL PRODUCTION. In 10 years of activity this structure has reached a strategic position to serve not only Italian but also European clients. According to the components to be produced, technical specifications, cost targets, production volumes, AV Consulting chose the correct mix between MATERIALS and PRODUCTION TECHNOLOGIES. 7 production plants in Italy between Marche and Emilia Romagna and three partners in France and in China allow us to manage prototypes, small productions and mass production. POLIURETHANE, INJECTION MOULDING, TERMOFORMING, CARBON, COMPOSITES, RAPID PROTOTYPING.

Barreiros is a Portuguese company, founded in 1986 dedicated to comprehensive management of molds for plastic injection molding, located in Oliveira de Azeméis, Portugal. From planning, preliminary analysis and engineering, manufacturing follow up, inspection, trials, logistics and delivery of the mold and plastic parts at the customer facilities, permanent support team, on site support, we make a complete intervention into the mold life cycle, applying the knowledge of thirty years in the industry, using the state of the art technologies; Our timely responses and permanent care are synonymous of trust, responsibility, hard work and quality, which reflects in the success of the projects of customers who choose our solutions; We work for worldwide markets with the most demanding industries from automotive to home appliances. As such, we’ve reached about 3000 molds and millions of molded parts so far. The corollary of these mature solutions and industrial services, is the recognized product and services quality by all of our stakeholders; Our strategic geographical position within the Portuguese molds cluster, allows us to be closer to our partners with the right know how to respond to new market challenges of the moulds today. If you consider subcontracting tool and mould making, I’m sure we can present you very competitive solutions, with maximum secrecy; Consult us right now!

As a medium sized company we work with our clients in the development of plastic products in partnership. It all starts with your idea! You have drawings or samples of their new product? We advise you on the plastic materials and the implementation of your product in an injection molded product. For new developments we can work together with designers to optimize your new product. With our tool you can get everything from a single source - from planning to the finished product! Our quality and environmentally friendly injection molding parts we provide different industrial sectors such as the automotive, electrical, household and mechanical engineering industries. This guarantees flexibility and allows our expertise in various industries for a continuous development bring. Quality, a reliable partnership, flexibility and competitive prices make the difference! For further questions we are happy to be available - please send us an e-mail or call us a call!

The full-service provider - Integrated Solutions in Plastics Our company is producing plastic parts for over 25 years. We also produce the required tools ourselves. If required, we will build prototypes. For the non-automotive sector, we offer development services for our customers. All our activities are done climate neutral. Our corporate actions are guided by the goal to fulfill our customer’s desires. This must be accompanied with sufficient profitability, as well as an economic activity which is consistent with our desire for sustainability. For this, we include our employees, suppliers, customers and our social environment. The imminent climate changes require great immediate effort from everyone. We see ourselves as a company with a special responsibility, because on the one hand, we consume large amounts of resources of all kind, on the other hand, we have the chance to handle them thoughtfully. This is why BeoPlast aims to implement what is possible. It’s not about striving for profitability, but about a balance between economy and ecology. We want to actively support customers, whose goals also come from a desire for sustainability.

Crafting Quality, Delivering Swiftly: Your Manufacturing Partner for Speed and Precision. Specializing in complex CNC machining and injection molding.

Technology injection moulding 3D foam injection moulding Extrusion – shaping the future together Extrusion – to us, that means creating a wide range of profiles of 45-90mm single screw extruders, co-extrusion lines, and direct gas-injection plants. Using materials such as PP, PE, PVC, ABS, PUR, SBS, and EPDM, we manufacture custom-made cross-sections. Thanks to the fact that we build our own special machines and tools, we are also in demand as a partner for individual requests. Our successful partnerships are based on: * our experienced development engineers * our highly-automated extrusion lines * our multi-dimensional punching technology * our professional laser cutting and inking processes * our process-orientated quality management (ISO/TS 16949:2002)

For more than 40 years we have been engaged in the design, industrialization and molding of technical articles in both metal and plastic; today Segato is specialized in the construction of structures for desks and complements for office furniture with an elegant and innovative design. Customer involvement is very important for finding targeted solutions and responding at best to his needs. The design is carried out within the company, also in collaboration with designer, architects or technicians. We make use of innovative technologies and cutting-edge equipment, we use quality materials to guarantee a valid and solid product, able to persist for a long time. In the company there are highly trained collaborators, able to respond quickly and precisely to various requests. the care of details, attention to functionality and design are an integral part of our mission which is focused on proposing entirely MADE IN ITALY solutions.