Plastic is our passion. Design our strength. In line with our guiding principle "Innovation in Plastics", we have been developing clever plastic solutions for the individual needs of our customers for decades. The high-quality plastic applications are produced exclusively by experts in our factory in Switzerland. 100% Swiss quality and genuine craftsmanship. No production line work. Reliability and timely delivery are very important to us. Cellwar is an owner-managed company. Benedikt Zenhäusern, Chairman of the Executive Board and Christian Poffet, Member of the Executive Board work day by day with more than 30 highly qualified and motivated employees on new ideas and solutions in processing technology. In order to get qualified junior staff, we directly train our own apprentices.

We, the SAMIX® GmbH, are a rapidly growing manufacturer of stirring systems. Our international customers from the pharmaceutical, cosmetics, food and laboratory sectors appreciate our high quality standards and our service orientation, which we ensure, among other things, through our high level of vertical integration. We employ almost 30 people at our location in Zella-Mehlis, we want to and will continue to grow. We have been part of the Medisca group of companies since 2019 and focus on all sectors that require stirring systems for semi-solid substances in research and development and beyond.

Fully equipped tool shop Every year, we build between 40 and 60 new injection molding tools. Tool relocations Experience from over 250 injection molding tools purchased. We would be happy to assist you with our experience to fully maintain your ability to deliver and to solve previous problems. SPECIALIST IN MAKING Each injection molding project is a very individual, often very wide-ranging project, which must be completely thought through in all areas. This is the only way to avoid unnecessary follow-up costs, coordination difficulties, delays in deadlines and quality problems. Hoffner plans the entire project with foresight, consistently supervises and usually implements it himself. innovative & reliable over 55 years of experience and know-how Why us Generational change completed. Average age of leadership 41 years. Average age of skilled workers 33 years. Highly competent contacts Our own, fully equipped tool shop PVC specialist State-of-the-art technology. Average age of machinery approx. 8 years. We consider injection molding to be sustainable. Classic & with bioplastics What you get from us: We show you the options, think with you Plan with foresight and implement reliably. Highly innovative in the required quality and in the best possible cooperation and communication with you. You'll get what we promised you. Tailored... at best with a positive surprise or two. “Work is love made visible” (Robert Betz) Hoffner-colleagues (4) At a glance Our strengths Experience with all thermoplastics Specializing in PVC processing 27 injection molding machines, average age 7 years Deliberately not automotive 2 component articles semi- and fully automatic Insert technology In-house fully equipped tool shop A strong family of companies, with fun for your own development With experience from over 2,000 tool projects, with experts in every required subject area and With over 55 years of company history, we provide you with our know-how for your success. Hoffner plans the entire project with foresight, consistently supervises and implements it himself.

We are a medium-sized company, which is active as a supplier for general machine building in the greater Hanover. Our company employs 20 people who work in two shifts to 4 CNC lathes with driven tools, and 4 CNC machining centers, including 2 piece 5 axis machines.

inotec GmbH, based in Manching in Upper Bavaria, is a medium-sized company in the plastics processing industry. We specialize in manufacturing optical and technical plastic parts. Our components are used in the automotive industry, medical technology, the construction machinery industry and the electrical and electronics sector, among others. At our site in Manching, we have a wide range of injection molding machines ranging from 25 tons to 1500 tons of clamping force. With these, we produce thermoplastic parts up to a part weight of 5200 grams using both standard and very special injection molding processes. Thanks to our experience in the field of plastics processing, we are your competent partner for the production of a wide variety of components

AKRON means by "Subcontracting" a complete service, including consulting and co-operation with the customer. This is the reason why we put our pluriannual experience in plastic moulding at our customers' disposal, which means that we do not offer the mere plastic molding, but much more, i.e.: we suggest you the most proper type of material for your specifical needs; we analyse your product for you, in order to find the best material and solution to improve it and to get it cheaper; we design and manufacture the necessary equipment and molds; we mold, assemble and pack every possible plastic part, even with metal inserts; as many plastic components after the molding have to be wired, we cut to length, seam and insert the required cables. Thanks to our plant in Bacau-Romania, with more than 100 people, we can offer very cheap and highly reliable assembling works. In 2017 we bought the company Telcavi S.r.l., and produce now also a wide range of circular connectors for industrial applications: M8, M12, panel mount connectors, distribution box, valve connectors DIN 43650.

RTC Engineering is a globally operating technology company based in Slovakia, with a current team of over 140 professionals specializing in various fields such as Engineering, Precision Machining, Welding, Project Management, Assembly, Surface Treatments, and Integration. Our technological capabilities include: 12 CNC Milling machines (6 Five-Axis Milling machines) 5 CNC Turning machines 2 EMD Cutting machines Flat & Round Grinding Quality Inspection (2 CMM Carl Zeiss, Hexagon Scanning Arm, etc.) TIG Orbital & Manual Welding (20 welders) MIG Welding (20 welders) NDT Inspections Heat & Surface Treatments Assembly (Mechanical, Electrical, Pneumatic, Control Cabinets, etc.) Integration & Testing At RTC Engineering, we are committed to delivering high-quality, precise, and innovative solutions to meet our clients' diverse needs. Our state-of-the-art equipment and experienced team ensure that we can handle complex projects with efficiency and excellence. We pride ourselves on our ability to integrate various technologies and processes to provide comprehensive services from initial concept through to final implementation and testing.

Brewhouse develops and manufactures complex, close-tolerance stamping and bending parts for their own assemblies. Fixed partners in close proximity produce these parts SUDHAUS tools. Are used: Ribbons, wire and sections of steel, brass, bronze and chrome-nickel steel. The SUDHAUS tool and equipment meets all Requirements for the efficient production of various tools and equipment. High quality plastic and versatile manufacturing techniques provide the user with countless alternatives. In product development and design of the imagination are almost no limits. SUDHAUS has acquired a special know-how of the painting, the highest demands erfüllt.Teile the so-called Tag-/Nacht-Design not only found in the vehicle industries. The use of modern technology enables individual labeling of parts.

Technology: Development and production of injection molded parts from plastic materials, polymers, rubber and engineering plastics. In the machinery you will find u.a. Injection molding machines for two-color and multi-component injection molding, we also have the patent for the UICEG process In order to be able to offer our customers a ready-to-sell product, the devices of the manufacturing process were automated with the help of robots and manipulators and completed with equipment for decoration, cutting and packaging (blister packaging). From the first approach to the planning, our customers are accompanied by professional third parties, if necessary also with graphic and 3D drawings (CAD-CAM), in order to obtain the desired product in the best possible way by means of appropriate material studies (if necessary a formulation for specific materials is developed). as well as the support in the production of the tools (molds and others) to be able to realize. The aim is to receive a handcrafted product that meets market and / or customer needs.

As the IBS Group, we are a global leader in ceramic and plastic dewatering elements for the pulp and paper industry. With over 55 years of experience in grinding, milling and drilling demanding materials, we manufacture high-precision, complex components using technical ceramics, glass fiber reinforced plastic (GRP), and other specialized plastics.

PAWA-tech GmbH — Your specialist for high-precision 5-axis milled parts & series production PAWA-Tech GmbH specializes in the production of complex 5-axis milled parts as well as the efficient production of small series and series. With ultra-modern machinery and automated parts loading, we guarantee maximum precision and efficiency in CNC machining. 🔹 Our core competencies: ✔ 5-axis precision milling: manufacturing complex geometries with maximum accuracy ✔ Series production: Automated production of small and medium-sized series with consistent quality ✔ Efficient processes: Maximum productivity through cutting-edge automation technologies ✔ Wide range of materials: processing of aluminum, steel, stainless steel and plastics 🔹 Why PAWA-tech? ✔ State-of-the-art 5-axis milling machines with automation for maximum efficiency ✔ High repeatability & tight tolerances for demanding applications ✔ Fast & economical production through sophisticated process optimization ✔ Reliability & on-time delivery for industrial B2B customers Our customers from the fields of mechanical engineering, medical technology, automation technology and aviation appreciate our quality, flexibility and technical know-how. 📩 Contact us — we will implement your requirements to perfection!

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Welcome to the Web Site of Karcoma-Armaturen Decompression valve, pipe filter, drain cock: Just three examples of a few of our innovative products around the engine construction. We design, develop and manufacture fittings. This includes fuel fittings and filter elements such as pipe filters, straight-way filters or fuel filters (gasoline filters) as well as fuel cocks and drain cocks. Karcoma-Armaturen GmbH also specializes in the decompression valve, one-way restrictor and other valves such as the aeration and vent valve. Need a customized solution? We are ready to work together with you to develop a customized design for your special fuel fittings needs. From design to assembly, you are kept well informed.

Founded in 1985 Certified according to TS 16949:02 Audit according to DIN EN ISO 14001:2005 Technical advice for the development of cost-effective and tool fair injection moulded parts Project management, for each of your products you will have a competent person to turn to in our company Construction of process-safe injection moulding and punching tools on the premises Samples as per PPAP Level 1 to 5 and VDA 6.1 Establishing of initial samples test certificates according to VDA script vol. 2, fig. 3 Own toolmaking in case optimizing is required on your injection moulding tools Favourable auxiliary tools, good pre-series tools, process-safe serial tools and high-quality punching tools Takeover of existing tools is possible 35 Precision injection moulding machines with a locking pressure from 15t to 250t Precision injection moulded parts from 0,01g to 400g Two-component injection moulding Precision plastic parts with insert parts from Germany and Czech Republic Round-injecting of artificial leather High-quality articles with Tampon-Print lettering Cost-effective assembly of modular parts Last but not least, 90 employees who will be reliably working for you

The Röchling Group is a global plastics group. With some 11.000 on the workforce at 91 locations in 25 countries, Röchling ranks internationally among the leading enterprises in the field of plastics processing. With their thee divisions, Industrial, Automotive and Medical the Group, with its companies on the American, European and Asian continents, generates an annual turnover of around 2.6 billion euros. Within the Industrial Division, the Product line Machined Components has over 800 employees and is the world-wide leader in machining plastics. The flexible companies have specialized in the manufacture of high quality machined components for virtually every sector of the capital goods industry. We develop optimum solutions jointly with the customer, then realize them efficiently. Our products are used in nearly all industries like medical, food, intralogistics or mechanical engineering just to name a few. Flexible, powerful, precise The network of 18 machining companies of the Röchling Industrial provide you with virtually unlimited processing possibilities and a leading manufacturer with one-of-a-kind installations and machinery. We have invested in the most modern technology and thus, provide top quality with reliable tolerances and outstanding surface quality. From micro maching (0.5mm Dia.) up to large volume components. Our modern, high-performance CNC machining centres and large-size CNC milling machines offer the possibility of producing products in the largest dimensions with close tolerances. For our customers this means: • High degree of material utilization • Reduced assembly times • Fewer welding seams • Narrow length tolerances Our high-precision CNC systems are equipped with dry and wet processing as well as internally cooled tools. This enables production of complex geometries and narrow tolerances, while at the same time maintaining a high degree of surface quality. In addition, we are also able to perform 5-axis machining. Round components Ø up to 3,500 mm, larger dimensions on request. We have invested in the latest technology and deliver top quality with reliable tolerances and excellent surface quality. We also offer processing of other materials in combination with machined plastic parts. Currently we have, among others, more than: • 100 CNC milling machines • 50 CNC lathes • 15 automatic profiling machines and a wide variety of profile extruders with over 600 tools Combined components The workflows in our machining companies are also designed for the production and assembling of complete assembly groups. Thus, thread inserts, ball bearings or other inserts can be added in further processing steps and combined with other components into complete assembly groups. https://www.roechling.com/industrial/products/thermoplastics-machined-components

The company Stöckl feast is a manufacturer and producer of technical plastic parts for industry and trade, as well as plastic parts for household, dry goods and toys industry. Our capabilities in plastic processing / injection molding department: - Plastic parts 1g - 1000g - Encapsulation of parts - No quantitative restrictions Plastic parts can be produced for all industries: - Household goods, decorative items, cleaning, kitchen - Technical parts such as valves, caps, caps, cups, straps, hooks, cans, lids, buffer On your behalf, we develop projects and solutions that meet your requirements are. By the company's own tool shop we are able to construct your injection molding tool itself and produce From the pattern idea to series production, we produce exclusively for you. The processing of thermoplastic polymers, fiber reinforced how-unreinforced, in all RAL colors orPantone colors can be, we are all the requirements you place on your plastic part requirements. Our additional production procedures, such as cutting steel pipes, powder coating, tube bending, and our assembly lines for partial and final assembly let us additionally complete your product. Direct Sales products are: - Protection against pigeons / doves protection of polycarbonate transparent with protected plug-in or assembly system - The highest power industrial floors made of PVC. For more information and pictures on our website: www.stoeckl-schmaus.de Other production: - Tube processing / tube bending - Powder coating - Assembly Own Products - Bird Control - Pigeon Protection - Floor - Massage Balls - Hedgehog balls - massage rollers - Promotional Products - Tubes Dreher - Promotional Products - Bottle Opener

Containers and tanks in all materials, shapes and sizes e.g.: GFK (glass fibre reinforced plastics), PE-HD, PP, PVC, PVDF and as composite material like PVDF/GFK or PP/GFK carried out as round, rectangular, oval or triangle containers / tanks, also with insulation and / or cooling and heating mechanisms for special assemblies. Milling and turning parts made of all plastics (precise CNC-machining of PP, PE, PVC, PVDF, PTFE, etc.)

We are a medium sized company and have specialized in the areas of tool and mold as well as special purpose machines, jigs and fixtures. You will find our Operational 25 km from Hannover, Neustadt a Rbg .. in the district of Basse. There you will find our experienced team of 65 employees. We offer the following services: Tool and Mould Contract manufacturing in the areas of CNC milling (3/5 axis) and turning  Product Development  Prototyping  2D/3D - Construction  Tools and forms  injection molds  Punching tools and devices  Individual production according to customer specification  Special purpose machines  machinery and equipment including construction  Installation and commissioning on site