Dear valued customers, We are pleased to prepare a project proposal for you. The following areas are our strengths: - Aluminum extrusions (including processing, surface treatment, just-in-time) - Stamping and bending parts - Pressure die castings (aluminum and Zamak) - Component creation - Plastic parts - Turning and milling parts

Our expertise at the service of customers 30 years experience The mkt metal and plastic GmbH is an innovative, customer-oriented company with a focus on the production of metal-plastic composites and demanding thermoplastic plastic parts and their construction. The foundation stone was laid in 1996 by a successful MBO with 30 years of experience in the tooling and plastic molding. We offer our customers solutions for the thermoplastic injection molding, simple parts to complex assemblies with overmolding of metal and parts in 2-shot molding components. We control quantities from prototype to series production parts with million parts per year. We develop solutions for the most varied of tasks in the automotive, office furniture, aerospace, medical and automation industries. Competent troubleshooting Discuss with us your problem. Through competent partner in the fields of design, tooling and plastic injection we offer optimal technical and economic solutions. We implement the solution found by the design to mass production. Flexible and customer-oriented We are always there for you and advise you. We respond individually to their needs and show you tailored solutions with all our expertise.

Thermal spray processes make it possible to coat components with a variety of different materials. Classic areas of application include wear and corrosion protection. The regeneration of components that have already worn out offers a cost-effective alternative to the complete production of new parts. Due to the low thermal load during the coating process, distortion of the component can be effectively avoided. Functional surfaces can also be applied in the area of electrical conductivity/insulation and to protect against thermal stress. Our mechanical processing RANGE OF APPLICATIONS — Printing Industry — Microelectronics — Food Industry — Metal Construction — Plant Engineering — Aerospace — Electrical Industry — Automotive Industry — Medical Technology — Construction Industry — E-Mobility LOT SIZES — individual pieces — small series PLANT ENGINEERING Mazak Quick Turn 10M Diameter 150 mm travel 360 mm with driven tools with tailstock Tool places: 12 Mazak INTEGREX 200SY Diameter 200 mm travel 1016 mm with driven tools with counter spindle Tool places: 40

Since 1962, Nuova Saimpa has been a trusted partner in plastic injection molding, delivering high-quality solutions across diverse industries. 🔹 Core Competencies Injection Molding Expertise: Over 60 years of experience in single and multi-component injection molding Extrusion 🔹Industry Coverage: Proven solutions for - Home appliances - Operational machinery - Air conditioning systems - Medical applications - Technological components 🔹 Complementary Services - Screen and pad printing - Laser engraving - Assembly and finishing solutions With our long-standing expertise, flexibility, and full-service approach, we are ready to support your projects from concept to completion.

The Klaus Brummer Henrich GmbH & Co. KG (KBH) designs and manufactures custom plastic items. According to customer requirements by drawing, measurement or sample new products are developed and produced in series. In addition to the development of new products and tools KBH accepts as a classical wage splashes to the same extent existing tools into production. The size includes manufacturing products weights from 0.05 to 1600 g The combination of design, tooling and plastic injection molding under one roof makes it possible to realize flexible and in constant exchange between departments the article. This means for the customer: From the first contact to the finished article, he gets everything from one source. The main focus will be housing and functional parts, produced eg for the electrical and furniture industry, articles of construction and plumbing industry, promotional products and writing instruments as well as for packing, but also a variety of other industries can be found in the customer master again. Since 2004, all business processes in an integrated ERP / PPS system are mapped. Since 2006 the company is certified in the areas of tooling and plastic injection molding according to ISO 9001:2000 (renewed in 2009 to DIN ISO 9001:2008) The family business since 1972, handing over to the 2nd generation was completed in 2011. A special attention is given to the resource-saving and energy-efficient production of plastic parts. Since 2010 is a member of the KBH LEEN OWL - the learning energy efficiency network in the region.

iswo metall gbr is an owner-managed, medium-sized metal processing company based in Lower Franconia. Since our company was founded by Almir Islamcevic and Ute Wolf in 2007, we have been welding and turning, especially in the areas of machine and plant engineering. Development and continuity are at the heart of our work. Since its founding, iswo metall has relied on a well-coordinated team, short distances between the different areas in the company, and quality guaranteed by the owner-managed structure. Our employees are specialized and in constant contact with management active in production and administration, which ensures quality and guarantees flexibility. Iswo Metall Gbr Main road 144 97904 Dorfprozelten www.iswo-metall.de info@iswo-metall.de

Customized solutions – We shape plastics As a reliable partner for the processing of high-performance plastics, we support you from the initial idea to the finished product. Our decades of experience and technical expertise enable us to develop customized solutions for a wide range of industries such as medical and electrical engineering, mechanical engineering, sanitary and water technology and the aviation industry. We rely on state-of-the-art technologies, including advanced simulation techniques and prototyping, to meet your exact requirements. Our flexibility in production and in-house toolmaking guarantee not only the highest quality, but also fast and efficient processes. Thanks to flat hierarchies and short decision-making processes, we are customer-oriented and offer you solutions that are tailored to your individual needs. Our passion for plastics technology and our commitment to innovation make us your ideal partner for the implementation of complex projects.

We offer innovative solutions made of plastic and metal, from the precise manufacture of individual components to complex assemblies – everything from a single source, from development to series production. Our range of services includes injection moulding, machining, sheet metal working and welding technology, as well as the manufacture of tools and components. It extends from toolmaking and high-quality components to customised special vehicle construction and certified special protection systems that protect people worldwide. Customers from industry, medical technology, mechanical engineering, agricultural technology, the off-highway industry, railway technology, defence and many other sectors – including the automotive sector – rely on our experience and quality. With around 1,000 employees at seven locations in Europe and a modern machine park, we are ideally equipped for every task – and are sure to provide you with the right solution.

CNS — Your experts for contract manufacturing, special machine construction, trade in testing equipment and sensors, manufacturing of individual testing devices and sensors, testing services and service and maintenance services related to non-destructive material testing!

SD Partners Ltd. was founded in 2006 by Dipl. Eng. Hristo Dradalov who has more than 25 years of experience in the field of mechanical engineering. Our scope of work is versatile, offering a vast range of services, suited for the needs of our clients. The company is a manufacturer of machined parts and electro-mechanical assemblies. ​ We are a quick developing company with customers from whole Europe. We are aspiring for growth and success, therefore we are constantly investing in new machines, technologies and staff training to keep up with the continual thechnological evolution and customer demand.

CNC processing (milling, turning, surface and cylindrical grinding) of individual parts through small to medium series Milling up to 10500mm in length Turning up to Ø1800 and 6000mm in length Surface grinding up to 3000x1500mm Cylindrical grinding up to Ø1200x600mm With our own QA for the production of ready-to-install components

Spectrum CNC d.o.o. is a production and service company for mechanical metal works with CNC milling in large and small series. We can work on most materials used in the metal industry. Most of our final products go through complex processes, and they achieve high speeds, small tolerance and modern technology. Customer satisfaction is guaranteed by the high quality of the products. According to our customer’s instructions we can make products in complex shapes and for very specific purposes, where employee know-how and experience come in very handy. Good communication and professional advice help our customers reach their goals and help us make the products they like.

Precision in every injection-molded part Welcome to L&S Technische Kunststoffteile GmbH — As an independent and family-run company, we have been producing technical plastic parts using the injection molding process since 1994. As a reliable partner, we support our customers in all matters relating to the development and production of high-precision plastic parts. Our range of services includes prototype and small series production, as well as fully automated series production of plastic parts. Our products are used in a wide variety of industries and areas of application, from automotive to industry to medical technology. In addition, we offer our in-house tool and mold manufacturing customers many years of expertise in the design and manufacture of all types of injection molding tools. In doing so, we focus our actions entirely on the needs of our customers and always strive for a reliable and long-term partnership. In doing so, we offer our customers added value in terms of quality, flexibility and efficiency through our comprehensive range of services relating to plastics technology. Learn more about us and how we help shape our clients' success stories through long-term and reliable partnerships.

The company Seelandt & Utecht OHG Plastics Processing was founded on 01.07.1990 by the shareholders Michael Seelandt and Heiko Utecht in Eldena at Ludwig's content. Purpose of the company is the manufacture and sale of plastic products of all kinds and all activities in connection therewith. The production was initially only an injection molding machine with a clamping force of 50 tons. In subsequent years, the machinery could werden.Im gradually expanded in 1993, the production site of Eldena was moved to Schwerin. At the new location, the product range, and the overall conversion could be increased significantly. Furthermore, the machinery has been adapted to the new requirements of its size and its performance and features. The own production program includes tool box and tackle boxes, household items, motorcycle bags, fishing accessories as well as accessories for the garden area. The export share is about18%. A second and more kicking in the foreground area is the production of technical items in the customer order. These include, for example, housing parts for electrical engineering, parts for automotive engineering, plant construction and mechanical engineering as well as parts for various construction trades, or even complete units, such as speakers for the sound of wholesale markets. Production is done on modern day injection molding machines with clamping forces ranging from 60 to 400 t. Plastic parts to 1,100 parts by weight of g can be injected. We offer our customers more and also complete solutions. Due to the close cooperation with partner companies from the region, the process chain from design and engineering, prototype, tool and mold making is feasible to mass production. The company currently has 14 employees employed principally in the three-layer system. The assembly and packaging of the products is carried out in close collaboration with a sheltered workshop in Schwerin. In December 1999, the company moved into a new 2500 square meter production hall and warehouse. Thus, the best conditions for the production of high-quality plastic parts are given to us. Due to an increased storage volume, we can react instantaneously to information on goods of our customers. A working group of the sheltered workshop has been integrated directly into the assembly and manufacturing process from the middle of 2000. The main markets of our products are also of Germany and Scandinavia and Western Europe. To all our customers' requirements to fulfill in terms of quality and adherence to the agreed delivery dates can be, and to ensure the reproducibility of the operational processes, operations and corporate principles and to make testable, we have developed and implemented a quality management system based on DIN EN ISO 9001:2000.

Your partner in manufacturing technology Using state-of-the-art and networked CAD systems, our engineers and designers develop efficient and innovative solutions for the diverse requirements of our customers. We produce quality. Are you looking for an individual solution? Our technologies are designed to meet all customer requirements With our diverse range of technologies, we offer you tailor-made solutions that are precisely tailored to your needs. Rely on our expertise and flexibility in the following areas: - Drilling mill work - welding - Spin - Milling - Grooves - Interlocking - deep hole drilling - Assembly - Mobile spindles Our range of services includes the construction of special custom-made products, the processing and production of prototypes, individual pieces and series, and the repair of damaged or worn tools and components. Let's talk about your project: Simply contact us or talk to your contact person directly. Our experienced team is happy to hear from you!

We produce stampings, precision springs, and wire forms for the automotive, electronics, computer hardware and lighting industries, among other sectors. Virtually every material is processed by our modern, highly flexible CNC automated machines, allowing quick machine set-ups. Our in-house hardening oven, grinding shop, and assembly equipment further facilitate the timely processing of semi-finished parts according to our customers demands. Perfect surface treatment of our products is guaranteed by plating firms close to our operations. These factors make a quick reaction to customer demands and short lead times possible.

Your Experts for High Performance Plastics The Ensinger Group is engaged in the development, manufacture and sale of compounds, semi-finished materials, composites, technical parts and profiles made of engineering and high-performance plastics. Further development of proven production techniques, new applications and international expansion have earned this family-owned enterprise a place among the leaders in its field.

Our company, Voulgarelis Tooling, was established in Athens, in 1983. The founder, Athanasios Voulgarelis, had gained valuable experience as a mould maker, by working for more than a decade, for well known American and Canadian toolmaking companies. In September 2002, we moved to our new, spacious workshop, conveniently located in the heart of the industrial area in Peristeri, an area easily reached, close to Metropolitan Athens, its nearby vicinities and the port of Piraeus. We are an ISO 9001∶2015 certified company. Our core manufacturing capabilities include: - Toolmaking for injection moulds - Toolmaking for HPDC aluminum and zink - Injection moulding for small to medium production - Hot chamber Die Casting - 5-axis machining