Üstek Makina was founded by the mechanical engineer İsmet Üst in 1978. The company manufactures spare parts of automation technology and mechanical parts. Our production contains predominantly fine industrial parts, spare parts of landwirschaftlichen machines, small-caliber precision parts, Pistons, tiller; Multi-axis machining of aerospace industry parts. We have experience with steel, cast iron, wrought stucco, brass, copper, aluminum, titanium, plastics. We can also run on the client thermal processing, surface treatment and very fine loop works requirement. Our company, IS EN ISO 9001: 2000 Qualiaetszeugnis has, is pleased with the experienced Inge kidney and employees under the motto '' The Great products, on time and with best quality 'to serve'. Of course, our company is also the controls that are made by companies from abroad and domestic.

Our workshop is located in Bakonszeg in Hajdú-Bihar county, 7 kilometers from Berettyóújfalu. We are engaged in casting since 1982. We are producing non-series and mass production adopting sand and gravity die casting products.The maximum weight of castings we can produce is 150 kgs for aluminium alloy parts and 200 kgs for copper (tin bronze) alloy parts. We deliver the castings in unmanufactured or after machining. Metal works possibilities are: lathing, milling, AWI shielded-arc welding, heat treatment , sand blasting, electrostatic powder coating etc. We are in contact with companies designing and manufacturing gravity die casting dies. Our customers are companies concerned in transportation, food, agricultural and textile industry, shops selling equestrian sports products.

For more than six decades with leading products on the market. * Machining centers: Milling centers in 3 - and 5-axis / 5-axis simultaneous technology for complex machining tasks * Drilling: Leading in table, column and pillar drilling machines - with over 180,000 machines sold worldwide. * Special equipment: for vertical and horizontal multi-spindle drilling and milling - up to 12 stations, for the shortest cycle times in high-volume production * Foundry and Service providers with a system - of cast iron with spheroidal graphite and flake graphite for processing on color through just-in-time logistics.

In the Components division high-precision components, among others, for manufacturers of wind turbines are manufactured. Customers benefit from over 140 years of know-how of DMG MORI Group in mechanical engineering. The Components division can refer to many years of experience and numerous references from all over the world. The outstanding quality and high reliability of Components is appreciated by customers in industries such as machinery and special machine design, innovative energy industry or the construction machinery industry.

Key points about the company Teutoguss GmbH stands for: • Consulting in material, design and value analysis questions • continuous on request use of 3D CAD data, rapid prototyping • exemplary IT organization, integration of all the key application areas in technical and commercial areas Main applications, customer base: • Shipbuilding • Tool, road construction, testing, land, special purpose machinery • Pumps and Valves • Compressor, Vakuumverdichterbau • Gear, Sondergetriebebau • Wind energy plants • Gas Fittings • Tools and equipment • Hochleistungsventilatorenbau Production methods: • Mechanized hand-formed cast of 50 kg to 1300 kg per piece, in cold resin-bonded sand (furan); box sizes 520x620 to 1100x1100 • Hand Shaped castings to 15,000 kg per piece in GG, to 10,000 kg per piece in GGG, in cold resin-bonded sand (furan); box sizes 900x1720, 1000x7000, 2700x4500, and many special sizes Casting materials: • Cast iron with lamellar graphite according to DIN EN 1561: EN-GJL-200 to EN-GJL-350 • Cast iron with nodular graphite according to DIN EN 1563: EN-GJS-350.3 to EN-GJS-800 • ADI 800 and ADI 1400 according to DIN EN 1564, EN-GJS-800-8-EN-GJS-1400-1 Core manufacturing process: • CO2, cold resin, cold box, Croning

We are a polish family-run company with traditions dating back to 1912. To our customers we offer comprehensive "project to product" solutions in scope of drive transmission components , iron casting and metal machining. One of the most modern iron foundries in Europe along with the full range of metal processing services allow us to offer the final product from "one hand" - wth the highest quality and the competitive price quaranted. We specialize in manufacturing of drive axles, suspensions, gears, transmissions and other traction and drive transmission components. Our systems we offer to the producers of buses, rail vehicles, mining vehicles, construction, agricultural ans ground support equipment. Us a licensed military equipment supplier we develope our cooperation with the armaments industry, our capabilities allow us as well to supply the maritime wind energy business.

Specialist in the machining of castings from aluminum, cast iron, brass, bronze and steel parts Individual production of drawing parts according to customer specifications from prototype to series of 100,000 units in Specializing in the machining processes milling and turning Mastering CAD / CAM programming for fast and high-precision manufacturing Our own tool and jig allows quick series start and high flexibility 50 specialists in turning and milling at two locations in Buchkirchen in Wels technologically strong partner with high investment potential in modern machinery Industries Served: Special vehicle industry, automotive industry, equipment construction, design, rail vehicles, Winter sports industry, mechanical engineering, electrical industry

ForgingCastingSolutions - We bring your construction into shape! You have the drawing and we have the right foundry or blacksmith. We procure your parts for you internationally at good conditions as requested and deliver them to your warehouse on time. These can be raw parts or machined parts. Also electroplated or hot-dip galvanized or painted. Do you need detailed advice on the choice of materials, design or implementation of existing welded and milled constructions for new cast or forged parts? Then you are right with us. Would you like to have all parts of an assembly fully assembled? No problem either. We take care of the quality, the right packaging for sea or air transport, customs clearance and then deliver the goods to the desired delivery location. Also with special packaging requests such as printed cardboard boxes or the like. With our experience for more than 10 years, we try to make everything possible, please contact us.

ALUMETALL CZ s.r.o. - Aluminium Alloy Casting Foundry - ISO 9001: 2008 and ISO 14001: 2004 certified company. Customers highly appreciate: 1. Ensuring of complete technical development and 3D computer product designing in cooperation with the customer. 2. The construction and manufacture of foundry tools, its maintenance using non-abrasive dry ice blasting. This kind of blasting does not harm the shapes and surfaces of moulds thus considerably extending their service life. 3. Excellent products quality. 4. Short delivery times. 5. Helpfulness and speed communication. Production programme: components of hydraulic pumps, fittings, the high voltage transmission systems, pneumatic tools, engines, looms, fire extinguishers and other products in accordance with customer requirements. General parametres of the castings: weight 0.1 up to 30 kg/pc, minimum wall thickness from 4 mm. Material: Aluminium alloys according to standard EN 1706: AlSi12, AlSi12Cu, AlSi10MgMn, AlSi10CuMn, AlSi9Cu3, AlSi7Mg0.3 and the other. Production Technology: 1. Gravity casting into steel moulds. 2. Low pressure casting into steel moulds. 3. Sand casting. Production of prototypes, small and medium-sized series. If needed there are used sand cores in above mentioned technologies. Additional manufacturing processes: 1. Heat treatment - T6 2. Shot blasting 3. CNC machining 4. Wet and powder coating 5. Anodizing 6. Galvanizing 7. Assemble of the final product On-site equipment for quality control of castings: 1. Stationary X-ray unit PHILIPS for non-destructive testing internal quality of castings and completeness assembled assemblies. Commonly used in the sampling and mass production castings. 2. Spectral analyser SPECTROMAXx - chemical composition of supplied castings 3. Hardness tester (HB). 4. VIC Helium leak detector MS50 - Leakage test products against the flow of helium vacuum, according to EN 1779: 1999. The test is used for qualitatively very demanding castings. Element helium as control medium due to its very small-sized molecules guarantees 100% confidence compared to tests using air. Destructive and dimensional tests are provided in cooperation with accredited laboratories. Experts at Turning Your Dreams into Reality

At Kowala foundry, located in the heart of Chybie, we have been blending the tradition of foundry craftsmanship with modern technology for over 37 years. Founded in 1986, our journey has been one of continuous development, enhancing our skills and expanding our machinery to meet the evolving trends and demands of the industry. We specialize in producing aluminum castings, utilizing both pressure and sand casting techniques, and are at the forefront of implementing cutting-edge technologies, including CNC machining and 3D printing. Our production processes adhere to the stringent standards set by ISO 9001:2015 certification, reflecting our commitment to quality and continuous improvement. Our mission is to deliver products that exceed our clients' expectations in quality, functionality, and design. With our rich experience, dedicated team, and partnerships with trusted suppliers, we proudly serve both domestic and international markets. At Kowala foundry, we believe that innovation, flexibility, and the ability to tailor our services to each unique project are key to our success. We invite you to collaborate with us and join our satisfied clientele.

We offer perfect service for small and medium-sized companies. We offer unbeatable service in the industry. Our goal is perfect results and the satisfaction of our customers always has the highest priority. We are proud of that. We advise you in the procurement of complex or technically demanding components. Thanks to our experience, we can quickly and easily develop measures and implement them together with you. Do you lack capacities in purchasing or are your employees involved in special projects? Just ask us! - We are here for you! Use our know-how, our global network and our experience in terms of technology, production and supplier selection.

Nedimpex Mij BV is supplier of constructive parts. We supply different kind of turning & milling parts, welding & construction parts, sheet metal cutting & bending parts, castings incl. several. surface treatments. We combine our knowledge and experience with a wide range of technological production possibilities. We deliver high-quality products at a low cost price and short delivery times. We work together with Nedimpex Products BV for the assembly of components and semi-finished products.

We manufacture cost primarily small castings: * Carbon steel casting * Low-alloy steel casting * Cast iron with spheroidal graphite * Wear-resistant castings in single, series and mass production. The largest part of our range of products is manufactured on an automatic molding line. With this system we are able to manufacture a broad range of high quality and dimensional accuracy. The melting operation was completely renovated in 1991. Two modern medium frequency of ABB were installed, which allow a wide range of materials.

THE SPECIALISTS FOR PROTOTYPE AND NICHE SERIES The BÖLLINGER GROUP with their subsidiaries HPP, KONCAST and INPECA specialise in manufacturing innovative prototypes and producing development parts, as well as niche and special series production runs – primarily in the field of drive Engineering, chassis frame and steering mechanism. Across all processes and technologies, our service begins with expert consultation for our customers and covers everything from engineering to the production and demand-driven provision of components for the automotive, aviation, machinery and plant construction industries.

Our company was established in 1965. The headquarters is located in İstanbul Turkey. It is very convenient to be reached with an advantageous geographic position; it is located about 40 kilometers away from the Ambarlı Port which is the biggest port in Turkey, and about 25 kilometers away from the İstanbul International Airport.The foundry is equipped with several types of production lines including automatic or semi-automatic production lines of key processes:

The company Vitz-metal casting is a family-run aluminum foundry in Velbert and is now in its third generation. We have 20 employees and are committed with ♥ blood-casting. We are certified in 9001 for many years according to DIN EN ISO and are constantly working on securing our high quality standards. By size of our company we use the opportunities to respond to the needs of our customers flexible. We manufacture castings in a box size of up to 1200 x 1000 mm. For custom-made (eg for prototypes), in small batches and medium-sized series we are your fast, flexible and reliable partner. If you want to use a 3D printer for their prototypes and know how the serial part will look like in aluminum, we are able to produce with the help of the 3D model an aluminum casting. Through many years and competent cooperation partners, we also possible to deliver to the finished part.These include: • Model Facilities • Heat treatment • mechanical processing • Trowalisierung • Coating / Anodizing In addition, we can offer you the production of complete subassemblies. Up to what degree of processing, we can supply you, you can choose yourself. • Supply of raw cast parts • supply of machined castings parts • Delivery of edited and assembled cast parts • Delivery of complete assemblies including assembly and testing Our standard alloys are: G - Al Si 10 Mg G - Al Si 12 G - Al Si 9 Cu 3 G - Al Mg 3 , and metallurgical alloys: G - Al Si 7 Mg G - Al Si 9 Mg Of course we also manufacture in consultation with other alloys. If you have further questions about our company or our abilities, we are very glad to help you. Please give us a call! www.vitz-metallguss.de

Walter Wagener GmbH is a metal foundry that provides comprehensive technical consulting services in addition to high-quality brass and aluminum castings. The company has state-of-the-art CAD and casting simulation workstations as well as CNC-controlled machining and turning centers at its disposal. Walter Wagener supplies customers with raw castings and machined die-cast parts and counts both medium-sized companies and numerous larger traditional companies among its clients.