We produce for the machinery, automobile and aircraft, as well as for other companies from various sectors.

Repair and new manufacture of plain bearings with Weissmetallausguss, composite plain bearings, bronze sleeve bearings. Construction of single parts in general mechanical engineering. Overhaul of small hydropower plants.

see for yourself

Since 1959, the company SIMON is active both as a manufacturer of molds for plastic injection and as a designer of special machines. Two basic activities: -Moulds for plastic injection Special-Machines General-Mechanical (small and medium series)

We manufacture precision turned parts of 3-18 mm and a length up to 1000 mm Materials We process all alloyed and non-alloyed materials Specialty - Stainless steels (1.4305, 1.4301, 1.4401, 1.4016, 1.4104) - High heat resistant steels (Alloy; Hastelloy) - Quenched and tempered steels (C45; 42CrMoS4; 50CrV4

In 1956, Angelo Padovan established OTLAV. This company - specialized in door and window hinges - has identified itself right from the outset with the personality, the entrepreneurial skill and the powerfully technical intuition of the founder. The spirit of initiative and an unceasing quest for increasingly innovative technologies have made OTLAV the most important manufacturer of door and window hinges of the screw-stem type, in the world. Its original features, markedly production-oriented, have led to strong natural technical selection in its inside, and the result today is that OTLAV guarantees the most modern production processes, an unequalled range of models, and specific experience of over fifty years in the whole field of hinges. OTLAV today is, beyond doubt, the world leader in this field, and it is significant that, after forty-five years, this success is still tied, as at the very beginning, to the basic commitment of the Padovan family.

Serial production of pneumatic and hydraulic valves, cylinders and components acc. to customer's drawings

Regarding the management of the flows of raw materials, products in the process of manufacturing and finished products, we enjoy the first place in Europe thanks to the efficient computerization and automation set up in our company. Machining tooling and special adaptations for our production machines are designed and manufactured in our workshop. Thanks to our CNC means, we can manufacture industrial prototypes and pre-series.

Romano Decolletage for more than a decade busy to take on the toughest job requirements of the customers. Strengthened by a rich experience, the company has research and development of new projects in close cooperation and in an advisory capacity with its customers the right partner. Messrs. Romano have earned an outstanding reputation in the world of precision mechanics in these years and now make their services in the following sectors available: household appliances, Screws and fastening technology, apparatus engineering, electronics and electrical engineering, defense industry, furniture and equipment, aviation, automotive industry , dental technology, telephony, glasses. We provide parts for the aforementioned sectors and indeed in the materials: brass, steel, stainless steel, aluminum, PX, titanium, copper, silver, gold

The company was established in 1995 - since then we have been successfully fulfilling tasks entrusted to us by our Customers. Our offer includes a wide range of services related to performing overhauls, manufacturing spare parts and rendering services for the companies, including the food industry. Based on our broad experience as well as the Customer’s expectations – we render complex services: starting from the technical analysis of the assignment, through complete material supply, to the manufacturing phase of the subassemblies employing own engineering and manufacturing back-up facilities, as well as the on-site assembly, in the place indicated by the Customer. Such a complex activity is practicable thanks to the experience-based, flexible organizational structure, best fitting into the realized assignments. We have our own engineering department with highly qualified personnel. We have our own technical back-up facilities, based on specialized machinery and equipment. Our experienced personnel with confirmed skills and qualifications as well as the network of the sub suppliers and subcontractors – all this allows us to cope with any task entrusted to us, always within the agreed time and on the highest technical level. The shortest possible time of realization of the contract as well as the highest quality - at the reasonable price - those are our priorities we care most. We are aware of the Customers’ expectations, we respect their time and money, therefore, we treat each and every of Them very seriously and with the highest esteem. The acknowledgement of that fact and the appreciation of our methods is the unceasing development of our company. We systematically modernize our production assets, invest in latest technologies, new manufacturing techniques and technologies and highly-qualified personnel. Our human resources policy is to support young, ambitious and creative employees who, along with the experienced engineering personnel, form a mix of, in positive meaning, professional routine and creative restlessness. Our activity is not routine and it is extraordinarily efficient - the acknowledgement of which is a long reference list of the Companies we had and still have the pleasure to cooperate with. Our company has been granted the authorizations and certificates by the Technical Supervision Office (Urząd Dozoru Technicznego) within the scope of: Quality Assurance System ISO 9001:2001 as well as the techniques of manufacturing, modernization and repairs of tanks and pipelines. For comfortable cooperation and security of our Customers – we have the renewable insurance policy. We sincerely invite you to the cooperation - in return, we offer reliable services, we have been developing for many years and we still will improve.

TESLA Mladá Vožice is based on milling and turning operations in small and medium series production with the Los until about 10 000 pieces. Herstellpotenzial society oriented to the production of parts for the usual engineering, for the field of electrical engineering industry, medical instruments, automation and packaging technology. The experience of the working of the company, the various species own or supplied material to process: from high-strength steels, through processing of colored metals and alloys thereof to the processing of insulation and plastics. At the cutting machining socialize more with the completion of the parts, with surface treatment and assembly related services. The main activities of the company: Chip machining of metals Get ready the parts after the cutting machining Mechanical work welding Solder Finalization of modules Surface treatment in accordance customer requirements Exit Messe (measurement protocols according to customer standard) engraving rub off

The transmission plant Pirna already exists since 1885 at Pirna and our staff have many years of experience in the machining of stainless steel, steel, gray and ductile iron. We already today deliver parts and components for manufacturers of agricultural machinery, motor manufacturers, make Subcontracting for foundries and much more. The flexible use our extensive machinery production quantities are available from individual production to small series to mass production. Our production is divided into the areas of milling and turning with the most modern machining centers. Through cooperation with companies for castings and forgings, we are able to manufacture complete assemblies from a single source. Quality control with CNC-controlled 3D measurement technique is guaranteed. The aim of the transmission plant Pirna GmbH is to supply our customers with high quality and on time.

We are a traditional medium-sized subcontractor. Our company was founded in 1960 and has since been in family ownership. Today we have 50 employees, which ensure that in at our manufacturing precision and quality Paramount. Thus, we stand with all our staff together and excited behind our products and guarantee you to be a reliable partner.

The Ferrum GmbH has specialized in the manufacture of arched halls of curved elements in grid construction (steel tubes). In addition, the fabrication of single-tube and tie frame and custom designs in small and large series. In all questions of statics and construction, our customers can rely on the experience and the high level of training of our structural engineers, designers, and welding engineers. Perform all statistical calculations for the construction of a hall and monitor each production step strictly in accordance with DIN EN ISO 9001:2008 and EN 1090 - EXC2. The orders will be executed in multiple shift operation of a total of 50 production staff. About the manufacture of arched halls addition, we do on request, almost all other jobs in steel construction. We also guarantee this high manufacturing quality at reasonable prices. Translation by Google Translate

DVF SCREW is a family business growing, located in the heart of the Vallée de l'Arve (Haute-Savoie) for over twenty-five years. Specializes in turning small, medium and large series (maximum capacity 28mm) in various materials such as aluminum, brass, standard steel, non-alloy steel, plastic (PA6-6, Teflon, Nylon, POM) or stainless steel 303.304 L, 316L ... Its fleet technical and diversified machinery enables the realization of simple parts or complex finished parts on machines. DVF decolletage is certified ISO9001 2008 version by TÜV SUD. The industries are furniture, computers, automotive, cycle, agricultural, medical, aerospace or weapons. Periods of rapid responses and listening to its customers demonstrate professionalism in their work. DVF SCREW is a dynamic structure. We are at your disposal to all requests. Translation by Google Translate

The Zöchling Metalltechnik GmbH was founded by Mr. Herbert prince as a machine shop in 1973rd Starting in 1997, we specialized in precision mechanics and CNC technology. In February 2015, the company was integrated into the group of entrepreneurs Zöchling, bringing a new era in the company history began. Many years of experience and market presence guarantees our customers high quality products and services. Moreover, is set to long-term and trusting partnerships with our customers and suppliers. Our customers come first of all from the area plant and mechanical engineering, power plant construction and in the plastics and food industries. Our highly qualified employees are to be motivated all customer requirements.

West Bridge Engineering was founded by Andrew van der Bruggen in 2006 and specializes in manufacturing small to medium-sized precision parts using CNC turning and CNC milling. West Bridge has an extensive machine. We have the latest Mazak machines in use, of which the vertical machining center Mazak VTC 200 C II and the center of rotation Mazak Nexus 250-II-QT are linked to the HALTER Load Assistant. This means there is more flexibility, more can be produced and can be properly respond to specific and sudden customer inquiries. Via mechatronic wants West Bridge, beyond making parts, always get more modules and assemblies in the house and thus have a one stop shop for customers. This combination WBT & WBM is a supplier of

We produce high-quality turned parts on time according to your specifications. We offer you precision, from small series production to mass production. Thanks to our know-how and the use of our CNC lathes, we produce for you at competitive unit costs in reliable quality.