We are the company who is focused on international quality standards in the surface treatment and machine processing. We are represented in electrical and automotive industry. Production and service of company is primary focused on soldering tips, different metal sets (elements) and decorative parts of tailpipes. To assure competitivness of our products, we constantly make new research and improving the production process, as well as education of our employees. It is especially obvious in the segment of surface treatment- galvanization, where from 2010, we are co- owner for the patent in the mode of processing the soldering tips. Commitment of all employees and team work, every day confirm our vision that ZAH is synonym for the company who acts in the step with time, but nevertheless one step before our competitors. CNC machining ZAH is manufacturer of precision products. In our production range there are different types of soldering tips, screws, nuts, guide pins, studs, sockets, connections and a lot of other products. We can offer you production from very simple to very complicated products. As a base materials we use copper, brass, aluminium, and different types of stainless steel and steel. CNC machining performs on the most contemporary centers for automatic processing. For machine processing we use CNC lathes and milling machines of world brands as it is Citizen, Deckel MAHO and Doosan. Using the mentioned machines we can supply you products which maximal diameter is in range 4-32 mm. Respecting the european quality standards and using the high technologie, our qualified staff can offer you complete project construction. Our products are customized to your special requirements. Galvanization Galvanization is the electrochemical process of protecting metal by electrlysis (oxidation/ reduction process that occurs at the electrodes during the passage of electrical current through the electrlyte). Galvanizing assure product protection from corrosion and wearability. As a base materials for process of galvanization appropriate are: steel, stainless steel, brass, copper, aluminium or ABS plastics. In the process of galvanizing, one or more extremely thin layers of only a few µm (1/1000 mm) are deposited onto the base material in the so-called galvanic cell. The product that is going to be coated is immersed into a metal salt solution (electrolytes) and connected with the negative pole (cathode) of a direct current source. The metal that is going to be deposited also enters the conductive bath in the form of anodes (positive pole) and as salt split into ions. Under current conduction, the metal ion that is going to be deposited goes into solution and is activated by the cathode, which represents the part and deposited there as a metal coating. IRON PLATING NICKEL PLATING CHROME PLATING TINNING ZINC PLATING ELECTROPOLISHING VIBRATORY GRINDING Grinding Surface grinding is used to remove the defined material from product with intent to leveling the surface of product. Grinding is used for finishing, because it ensures a high surface quality. Polishing is the process of machining in which the removal of particles, is used to improve the appearance, to remove oxidation and formation of reflective surface. •Grinding- removal of part of material to leveling •Polishing- compressed material planning Welding Welding is the joining of two or more materials, by melting or pressing, with or without the addition of filler materials, in order to obtain a homogeneous weld. Welding versions in our production are: MIG, TIG, MAG and spot welding. References: Soldering equipment- global soldering equipment companies: - Schwer Präzision GmbH - Weller Tools GmbH - Zevatron GmbH - JBC Solderin SL - Steinel GmbH - Standard Metallwerke GmbH Grinding, polishing,galvanic coating and welding: - König Metall GmbH & CO. KG - REMUS Innovation

Giesler Drehtechnik GmbH has been a well-known manufacturer of automatic turned parts for the automotive industry and other sectors for over 60 years. As a family company in the Sauerland, we manufacture complex precision turned parts in large series.

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008. The activities of each company can be found in the following business areas again Textile • batching • centerwind • traveling cleaner • Transport systems (cheeses, roving bobbins, spinning cans) • suction and vacuum systems • coating and dry locations (use behind Web and knitting machines) • storage systems for bobbins • Palletiersysteme Contract production, such as • Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.) • Milled Parts • complete machine and plant construction according to customer requirements from design to Installation and Service • roller production (up to 8000 mm total length) • Locksmith • Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20) Commercial Vehicles • Production of portal elements • Profile editing • Installation • Coating -Machine Elements • Expanding shafts • Clamping Couplings • chucks and adapters • friction and blade shafts • Shaft handling -Kompressorenbau (shipping) • Start air compressors • pressure vessel • Industrial Compressors • compressed air starter • Air-conditioning • bilge oily water separator • Biological treatment plants Environmental engineering �� Screw mills, up to 120 m³ / h • starscreens • Shovel separators • air classifier Products for the steel industry • Band edge processing facilities • rolling mills ��� conveyor systems A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future. A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The Rampf GmbH was founded in 1967 in the beautiful Rettenbach market in the Lower Allgäu and was modernized constantly over the years. A continuous development in quality and processing possibilities unites our company still with customers from the very beginning, as were new customers from industry and trade to be won. The successful cooperation with our customers is very important to us. Our focus is in the manufacture of complex components up to series parts in the fields of CNC machining, CNC turning and CNC milling. For us there is a modern CNC machinery with lathes and milling machines available and guarantees the highest quality standards.

VITART is a company specialized in manufacturing high precision metal components on demand by mechanical machining. Each internal process is constantly optimized to ensure quality to the final customer efficiency and competitiveness. The VITART look is strongly oriented towards the continuous improvement of company KPIs for the benefit of customer service. Founded in 1966, VITART is a company specialized in manufacturing high precision metal components on demand by mechanical machining. Thanks to the great versatility and experience, VITART carries out mechanical machining and assembly, and produces high precision metal components, even with complex geometry, in stainless steels, special steels, brass and copper alloys and aluminum alloys for any business field. The company philosophy aims at a continuous technological progress and business culture development to offer an organization able to provide an increasingly complete range of services to customers, including positioned packaging, 100% automatic sorting, stock management.

CNC POWER d.o.o. Prijedor is a company that aims to become one of the modern companies for processing materials using milling, turning and grinding technologies on CNC machines. We work with new equipment and modern machines, offering an advantage when machining metals and making metal elements.

The Glaeser Precision Turning Shop GmbH is a family-run business. It is our understanding that you as a customer of our company are also considered our partner. We solve your problems in conjunction with you. Short-term decision-making processes and flexible resetting capabilities ensure a fast implementation even of special demands. Necessary alterations we realize in short terms and without any loss of time. Adherence to delivery dates and short periods from placing the order to shipping can be taken for granted. Through the continuous enlargement of our manufacturing capabilities we grow with the challenges and tasks assigned to us by our customers. Both flexibility and reliability serve as the basis of our business policy. Decide in favour of quality! We always aim at your complete satisfaction and contentment.

The official birth of SML dates back to 1994 and starting from the simplest processes, the company slowly began to specialize in two sectors: firstly, in the mechanical finishing processes thanks to the technical dedication and craftsmanship and secondly, in the processing of car wheels, flanges, channels and other components related to the automotive sector. Our technical knowledge allows a product to go from prototype to series. We have created a short production chain, eliminating steps and compressing production times, for maximum optimization.

Schapenberg Industries GmbH is an owner-managed, dynamic and internationally positioned company, based in Sprockhövel in the southern Ruhr area of Germany. Schapenberg Industries also has local presences in India and Turkey. As a holistic system supplier we see ourselves as an expert in castings (steel, ductile iron, gray iron, aluminum, investment and centrifugal casting), turned and milled parts, forgings, stamped parts and steel welding fabrications. Detailed informations you can see on our official corporate website www.schapenberg.de

NL-Maschinenbauelemente GmbH manufactures various components on 3 and 5 axis machining centers as well as turning centers.

Our company is since 1987 in the manufacture of special purpose machines, CNC machining, 3-D CAD / CAM milling turning, assembly of machines and components, general steel construction and welded constructions in MAG / TIG Our particular strength is in CNC milling and turning in all common materials. we offer you: - Milling - CNC Milling - 3D free-form surfaces - Form milling - Turning - CNC Turning - Assembly - Weldments

ZVIREX, Tržič, d.o.o. is a private family-owned company, which was founded in 1991 and based in Zvirče in the municipality of Tržič. In 1998 the company relocated to new commercial premises in the industrial zone at Loka near Tržič, which is today home to the company headquarters.

Tirometall GmbH is an innovative, dynamic mechatronics company based in the heart of Tyrol. Equipped with state-of-the-art machinery (5-axis milling and turning centers) and qualified personnel in In all areas, we are looking for long-term partnerships. We process all kinds of machinable materials and are constantly looking for new challenges. Through our large network of partner companies we can cover all surfaces relevant requirements and support our customers in the related matters. We offer:  High production competence  High solution competence  Flexibility - short reaction times, fast delivery times  Quality awareness - since 2018 certified according to ISO 9001: 2015  Prototypes co-development, small batch and series production.  Corresponding documentation, measurement records, initial sample test report, material certificates - these are our standard. In addition, we will provide you with a more detailed description of services in the annex or refer to our homepage www.tirometall.at We look forward to a good and successful cooperation with your company and are always available for further questions.

Custom Manufacturing CNC Milling Services Since 1974, We are reliable suppliers and manufacturers. Manufacture of prototypes with small and medium series. 46 years of experience, knowledge, expertise and continuous technological improvement. Milling, Turning, Special tools, Molds Manufacturing. Export to all Europe in 48 hours. Experience, commitment, constancy and determination have been our values for 46 years in the metal industry. Engineering & Design Services Machining Milling Milling & Turning Screw/Swiss Machining Turning Stamping Tool, Die & Mold Making Injection Molding

Unsere Betrieb ist seit 1988 tätig im Bereich Metallkonstruktionen und -wartung. Unser Hauptziel ist die maximale Qualität der Konstruktionen zu erreichen, die Einhaltung, der Lieferzeiten und mit die Verwendung unseres Wissens, die besten Lösungen und Anwendungen für jede Konstruktion zu garantieren. Wir fertigen alle Arten von mechanischen Teilen und Ersatzteilen nach Muster oder Design unserer Kunden. Unsere Werkstatt ist völlig ausgerüstet mit spezialisierten High-Tech-Geräten wie: C.N.C. Drehbänken, drei- und fünfachsigen Bearbeitungszentren aber auch mit einer breiten Palette üblicher Maschinen wie zum Beispiel (zB) : Drehmaschinen, Fräsern, Bohrern, Zahnradfräsern, Schweißgeräten. All dies in Kombination mit unseren hochqualifizierten Mitarbeitern, die ständig geschult werden, ermöglicht es uns, unser hohes Qualitätsniveau aufrechtzuerhalten und unseren Kunden die Perfektion eines vollständigen und genauen Endprodukts zu bieten. Unsere hochmodernen C.N.C. Maschinen gewährleisten die Möglichkeit, die Konstruktion zu wiederholen, sowie deren Zuverlässigkeit und Genauigkeit. Einige der von uns verwendeten Materialien sind: Stahl, Edelstahl, Gusseisen, Messing, Aluminium, Kupfer. Alle Materialien werden von einem Bauzertifikat begleitet.

We, the company “MWU”, produce high-quality CNC turned and milled parts on behalf of customers according to standard and customer drawings. The main customers of our company are from the fields of mechanical engineering, intralogistics, agricultural machinery, equipment and apparatus engineering, etc.

The Zaron precision parts Eberswalde GmbH is a company of the metalworking industry, was established in 2002 (slewing bearings through spin-off from the DRE / CON GmbH). By means of a new manufacturing process precision workpieces are individually manufactured according to the specifications and designs of our customers. This newly developed broaching method is patented and protected internationally. Our customers Our customers are mainly in the areas of safety equipment, instrumentation, tools, and electrical engineering. Furthermore, we manufacture for companies in the automotive industry and its suppliers. Toolmaking Our in-house tool is used not only for its own broaching tools and devices, but also stands our customers with appropriate capacity. Employee Zaron employs a highly motivated and qualified staff, who has many years of experience in sophisticated metalworking. Our innovative broaching method differs in many respects from the conventional spaces.The main difference is in the design of the tool. This consists of lined cutting plates, using shims gaps are created, each forming the chip chamber. All clamping stages are mounted in this way and connected by guide elements and fasteners to a stable Räumpaket. This simple geometrical construction of the cutting plates enables easy resharpening without special equipment. Precision in tooling The nuts and bolts when Zaron methods are the tools. The end product can only be a precision part, if there are already the tools. Is achieved the precision wire EDM machines. Corresponding to the finished contour of the finished part, the exact geometries of the individual cutting boards are fixed in the design and pass it directly to the machine for processing. With our procedure can be produced virtually every conceivable profile contours, regardless of whether any serrations or symmetric or asymmetric contours.The design and manufacture of the tools is carried out by highly qualified personnel on CNC EDM machines in-house. Our core business is the profiling of external contours in with the new broaching, including toolmaking. This process is in many cases an economical alternative to milling, planing and slotting of teeth and grooves or other profiles. Products: Synchronizer body: Clean the teeth and grooves in one setting. Outer diameter to 90 mm. Contours: Symmetrical or asymmetrical. Teeth Gears and toothed segments. Our services are in addition to the outdoor and indoor spaces: - Wire EDM - Surface grinding - Turning - Milling - ECM deburring

The company SC MATEC CNC TECHNIK SRL, was founded in April 2005 by Mr. Adrian Kreiner, having as main activity the production of parts for the automotive industry. The company operates in a space rented in Sibiu, based on a team of 5 employees and a processing center with numerical control. SC MATEC CNC TECHNIK SRL has as main object of activity General mechanical operations CAEN code 2562, with activities of turning, polishing, milling, reaming and welding of metal parts using machine tools with numerical control and / or conventional techniques and devices.