Small engineering company with its own design department.

Microniq Ltd.-From design to production! Our company's main activity is the manufacture and development of custom and mass-produced components, machine elements, design, manufacture and on-site installation of devices. We try to fill our spare capacities by contract manufacturing. We are innovative, creative, precise and highly flexible!

Company founded in 2021. Milling and turning capabilities. Especially machining of aluminium, brass, stainless steel and technical plastics.

The production of a die follows a long process: it starts with the conception of the object, moving through a process simulation aimed at studying the stamping method. Once agreed upon with the client based on production volumes and the designated presses, the design phase begins, which M.C.S. prides itself on for its precision. The manufacturing of the equipment is then immediately undertaken, coordinated by a thorough analysis of the process. M.C.S. also manufactures dies based on designs provided by the client, as is common in the automotive sector. M.C.S. specializes in the construction of dies for the automotive and home appliance sectors, but any sheet metal part can be produced by our team. You design a sheet metal product, and we will manufacture it for you. We handle single-stroke dies, progressive dies, and transfer dies, cooperating to fine-tune the part handling process. Our production flexibility enables us to engage in automatic production of both small and large series of parts with dimensions up to 3 meters, as well as in low-volume production using manual recovery dies. We rely on a team of highly skilled and experienced professionals in the field. One of M.C.S.'s unique characteristics is its advanced processing technology, which keeps the company at the forefront of the industry and ensures very high-quality standards Progressive dies:Our most innovative target Transfer dies:We aim to be a comprehensive partner, assisting the client throughout the entire process until production launch Prototype dies:When time constraints challenge us, prototype tools allow for rapid production and/or enable refinement of the stamping methodology study Milling and subcontracted mechanical processing:With our machinery and flexibility, we enthusiastically embrace the timing and technological challenges presented by the market. We have experience in the petrochemical valve sector, metalworking, and complex mechanical components AUTOMOTIVE INDUSTRY Molds for chassis framework and interior body panels Molds for reinforcement brackets, window lift guides, flanges, and mufflers Molds for components of any type Molds for thick sheet metal Molds for heat shields, including those made of aluminum MILLING MACHINE DEPARTMENT The milling machine data is summarized as follows : 3 x 3-axis milling machines with 5-face machining capability, 3000x2200 mm (10,000 rpm) 3 x 5-axis milling machines with a working area of 1750 x 1400 mm (18,000 rpm) 1 x Okuma milling machine for machining hardened steel and superfine finishes (15,000 rpm) 8 x CNC milling machines for parts up to 1600x1200 mm EDM DEPARTMENT The EDM data is summarized as follows: SODICK AQ400L SODICK AQ600L 2 MITSUBISHI MV2400R ONA BIHLER automation for the production of structural elements with steel, aluminum, copper elements

High product quality, consistent focus on quality, motivated personnel, efficient operations: These guidelines characterize our company! So we could since the company was founded on 1.8.1998 expand our production capabilities continuously and finished today in modern office and production buildings of 3,000 sqm in 3 layers. Our quality management system according to DIN EN ISO 9001:2008 ensures our customers process safety and impeccable product quality. And for many of our customers is the incoming inspection of long past!

HSP Schwahlen GmbH was founded in 1945. From on 1951 the production had been focused on adapter and withdrawal sleeves being the basis of our current line. At the beginning of the eighties CNC production of goods having greater dimensions was introduced. HSP supplies all main bearing manufacturers as well as the larger distributors. The standard production range on adapter and withdrawal sleeves, nuts and locking devices is completed by optional hydraulic assistance, abnormal metric inner diameter or complete inch-sized sleeves as well as all specialties based on customer specifications. Besides this we manufacture hydraulic nuts as well as precisely turned and milled thin-walled parts. Since 2000 HSP is also manufacturing various kinds of cages for bearings from 100 - 4000 mm outer diameter in high quality, small lot sizes and variable material (brass, steel, bronze, aluminium, ...) according to customers requirements. In this segment we produce for all main bearing manufacturers. In addition to the production know-how HSP has continuously improved quality, logistics and administration. This leads to the high level of quality, delivery conditions and service of HSP. At our newly built production facility in Langenfeld, established in 2001 and in between extended several times, we manufacture with the latest technology including 3D-measuring equipment. The certification of the quality management system based on DIN EN ISO 9001 and of the environmental management system based on DIN EN ISO 14001 by Lloyd's Register Quality Assurance Limited underlines the endeavour to achieve highest possible precision and satisfaction of our customers as well as the best possible environmental sustainability. HSP product range The HSP production programme covers adapter and withdrawal sleeves, nuts and locking devices with 130 mm up to 3000 mm outer diameter and approx. 600 mm in length. Besides the standard we offer the following: • Sleeves with abnormal bores and threads, metric / inch dimensions, special materials, ... • Production according to customer specification respectively to drawings • Special surface treatment (e.g. phosphating) • Longterm packaging • Direct deliveries, global sourcing and other logistical add ons Standards of the HSP production • Adapter sleeves according to ISO 2982-1:1995 (-> DIN 5415:2009-05) • Withdrawal sleeves acc. to ISO 2982-1:1995 (-> DIN 5416:2009-05) • Nuts following ISO 2982-2:2001 (DIN 981:2009-05) • Locking devices acc. to DIN 5406 • Any standard or recommendation of customers by drawing or text Additional products Cages for bearings with complex milling and drilling processes up to 1750 mm outer diameter processed in five axis. HSP is not limited to any design according to customer requirements. Most ferrous material can be machined (brass, bronze, steel, aluminium, etc.).

Welcome to the Heuer precision parts GmbH in Wernau near Esslingen. Our specialty is the CNC machining of metals and non-metals. For our customers, we produce high quality parts in small quantities, prototypes and pilot series to series parts in larger editions. Again this year, we continue to invest. We have end of January 2012 took another 4-axis machining center with pallet changer 14 in operation. We offer a wide range of other services such as grinding, broaching, burnishing and honing. For edits, we can not perform at our house, we cooperate with reliable partners. The assembly in our house rounds off our product and service range. We have here a selection of stocked by us or short-relatable materials listed: Steel: * Cutting steel: 11SMn30 (1.0715, 11SMnPb30 (1.0718) * Structural steel unalloyed: S235JR (10037 / St37-2), S355JO (1.0553 / St52-3) * Coating carbon steel: C35 (1.0501), C45 (1.0503), C60 (1.0601) * Tempered steel alloyed: 42CrMo4 (1.7225), 42CrMoS4 (1.7227), * Use steel: 16MnCr5 (1.7131), 20MnCr5 * Alloyed Ni - steel: X45NiCrMo4 (1.2767), * Tool steel: 90MnCrV8 (1.2842), X155CrVMo12 (1.2379), X210CrW12 (1.2436) * Bearing Steel: 100Cr6 (1.2067), Cf53 (1.1213) Stainless Steel: * Austenitic: X5VrNi18-10 (1.4301), X8CrNiS18-9 (1.4305) * Tempered, rust-resistant, acid-resistant: X39CrMo17-1 (14122) * Curable X90CrMoV18 (1.4112) * And many more Special materials * Hasteloy * Inconel Non-ferrous metals * Aluminium and aluminum alloys * Brass * Copper * Bronze engineering plastics * PVC (polyvinyl chloride) * PP (Polypropylene) * PE (polyethylene) * PA (polyamide), * POM (polyoxymethylene) * PS (polystyrene) Hochleistungskunststoffe * PEEK and PEK (polyaryletherketones) * PI (pressed polyimides) Examples of our production parts: Adapter flange ring threaded ring gear flange spindle nut gear carrier bracket bolt shaft bottle cap workpiece special flange deflection deflection receiving sleeve socket mount cup leadership leadership idler pulley roller shaft pulley welding flange block driver clamp clamping disc hub spring receptacle lid bearing seat tightening bolt motor flange motor housing brake flange rotor cylinder tube tube cam plate gripper finger gripper

We are a component supplier that provides the following services and deliverables: METAL TECHNOLOGY CNC turning & milling, welding, laser engineering, edging, punching, surface engineering PLASTIC TECHNOLOGY CNC turning & milling, welding, vacuumforming, clean-room and laboratory technology, plant engineering Our unique vertical integration, for instance in plant and mechanical engineering, allows us to manufacture everything in-house, from the base body with a metal-rack to the complete pipe work and electrical equipment, and to respond to our customers’ wishes with great speed and flexibility to ensure a maximum degree of quality, also for complex constructions.

We are the German sales company of the KUAN YI Group. The company was founded in Taiwan in 1989 and today consists of 7 production sites with over 2,000 production machines and 1,200 employees in Asia. We take care of customs clearance and fast delivery within a few days from our production sites.

mbo Osswald has been in existence for more than 50 years now, and that name has just as long been a guarantee for high quality mechanical linking elements. Usage of the latest manufacturing techniques guarantees top quality and rapid delivery times. Our Products made of steel or stainless steel (V2A, V4A, Niro, 1.4305, 1.4404, 1.4301, 1.4571, 1.4435) - Clevises, DIN 71752, DIN ISO 8140, clevis joints, DIN 71751, clevises with male thread, clevises with elongated hole, clevises with hardened cross hole, mating pieces for clevises, folding spring bolts, bolts, cotter bolts, DIN 1443, DIN EN 22340, ISO 2340, DIN 1444, DIN EN 22341, ISO 2341, threaded bolts, DIN 1445, angle joints, DIN 71802, axial joints, ball studs, DIN 71803, rivet studs, housings, DIN 71805, ball joints, rod ends, DIN 648, DIN ISO 12240-4, pivoting bearings, DIN ISO 12240-1, rod ends hydraulic, DIN 24338, ISO 6982, DIN 24555, ISO 8133, shaft retainers, retainers, locking washers, DIN 6799, retaining rings, DIN 471, joint rods, machine parts – are standard. We are also the right partner when it is a question of special parts. We manufacture precision turned parts (CNC turned parts) and milling parts in accordance with your specification or offer you the benefit of our know-how to find solutions to your special applications. Our machinery is characterised by high flexibility, special repeat accuracy and short machining times. For you, this means economical production of simple workpieces or even of geometrically complex parts of high-tensile steels with closely toleranced dimensional and surface specifications. We can manufacture for you rod parts and shaft parts made of steel, machining steel (1.0718) and stainless steel (V2A, V4A, Niro, 1.4305, 1.4404, 1.4301, 1.4571, 1.4435) with diameters of 4 mm to 65 mm up to a total length of 650 mm. In particular, cross-holes, turned grooves, millings, multiple-edge turning and complicated geometries can be executed. Whether you require pilot, small-lot or mass production of your special part, we guarantee short delivery times and especially economical manufacture. mbo – Systematic solutions for linking technology

We cover the market needs from design to finished product in the tooling industry, and in research and development of high technology. Our know-how in the processing of exotic materials makes us specialists in aviation and aerospace, racing technology as well as in laboratory applications. Ausgwiesenes offer expertise as in the area of injection systems for marine diesel engines and tech in electrical drive technology. As a small company we offer flexibility, fast and secure solutions, the best quality in the appropriate price level.

Using its experience gained from a long-standing tradition in massive forming and subsequent machining, Schmiedetechnik Plettenberg produces high-precision components for international customers in the automotive and non-automotive sectors.