Company has used its long-standing knowledge and experience in civil production sector as well. The main part of civil production covers: welding of structures, their machining and assembly into final products such as traffic, constructional, handling and agricultural facilities. In 2004 more than 80 % of civil production had been made for foreign companies mainly from Germany and Great Britain. Continual investment into advanced machine holding, production workshops, experience of our businessmen, technicians, workers and very good relations with our customers are very good conditions for further development of co-operation production development. Over the last year there has been turnover of 2,5 billion CZK and positive profits. Currently there is 950 employees. Supervision of management, prescribed product properties and parameters are guaranteed by permanent quality control. The company has been certificated in accordance with ČSN EN ISO 9001: 2001, and AQAP 2110 standard and process of welding according to ČSN EN ISO 3834-2:2006 standard both connected with the company informational system. The company is a member of the Economic Chamber and a member of Czech NBC Team aliance (www.nbcteam.cz) operating under the patronage of Czech Trade - the national trade promotion agency. International highway routes, railway service and nearby international airport enhance company international business/co-operation. VOP 025 is situated in the middle of a large industrial region with a lot of companies able and ready to co-operate. Production of engineering parts of building and handling machines, production, cutting, machining, welding, assembly and painting. Welding certificate according to the EN 729-2

I would like to welcome you to METALPROFIL. Our product portfolio essentially comprises the areas: turning, milling and gear cutting. We cover the entire spectrum. From individual one-off production to series production. Together with our customers, product-specific manufacturing analyzes are created in the design of new parts in order to achieve cost-optimized solutions. Let yourself be convinced by it.

Aero Gama is an Italian company operating in the precision mechanics sector in the aeronautical, railway and naval fields. is equipped with a vast fleet of updated machines with 5-axis machines, gantry machines up to 4000x2000mm of working range, horizontal machines for small and large production batches. the metrology room is equipped according to all iso standards. We also carry out small carpentry and assembly activities, as well as construction of dedicated equipment and machinery.

Metallservice Haar GmbH has been a successful supplier of welded assemblies for 23 years. Our certified welders carry out your orders professionally. Our specialists are accompanied by a welding specialist and an internal and an external quality representative. Large quantities can be produced cost-effectively thanks to our production know-how through continuous optimization.

3B FLUID POWER SRL was founded in 2002 from the acquisition of the third-party branch of a metalworking company with a thirty-year history in the sector. Today the company produces cast iron or aluminum die-cast items, hydraulic power units, hydraulic blocks, and aluminum or steel components for automatic machines. MISSION & VISION Respond promptly to market demands, increasing our level of expertise and specialization: a goal that we aim to reach and exceed every day, thanks to targeted technological investments and optimization of all existing resources. Our name includes the hydraulic sector which is now the heart of our production. In the future of 3B, we wish to expand the acquired know-how also in other industrial sectors. THE REFERENCE SECTORS Agricultural Hydraulic Mechanical Automatic machines, labelling Food Automotive Electric motors, gearmotors COMPLEMENTARY PROCESSING We offer the possibility of completing the processing of the product through specific finishes: • Painting • Microphosphating with zinc salts • Microphosphating with manganese salts • Thermal deburring • Galvanizing • Heat treatments for cast iron • Anodizing of aluminum • Nickel plating • Resin or loctite impregnation Today the production plant has a consolidated configuration in industry 4.0 in which we periodically integrate latest-generation machinery. The production is currently composed of: N. 9 - horizontal work centers N. 3 - multi-pallet horizontal work centers N. 2 - vertical work centers N. 3 - robotic islands N. 3 - CNC lathes N. 1 - automatic ultrasonic cleaning system Our horizontal work centers are all MORI SEIKI NH5000 DCG. The vertical work centers are all QUASER. We have chosen to invest in machinery of the same brand and model, to guarantee maximum production flexibility in favor of optimizing delivery times. CERTIFICATIONS Quality and Sustainability are an integral part of our way of operating. The ISO 9001 and ISO 14001 certifications testify to 3B FLUID POWER's constant commitment to improving business processes and responsible management of the environment. ISO 9001 ensures that every stage of our precision machining meets the highest quality standards, while ISO 14001 reflects our dedication to reducing environmental impact.

Firm has activity at repair of tractors Zetor and manufacturing of welded products as pallets,containers,others welded construction according to orders of customers. Firm provides a renovation a disc clutches,brake shoes by gluing of linings.

Visit our website

The "Officina Meccanica Gualco" has been working in the metal industry for 40 years and is specialized in Turning, Milling, Threading, Broaching and Wire-EDM. These areas are supported by a technical office equipped with CAD-CAM stations for design and calculation of tool paths sent to the machinery. With experience gained over decades of activity, we are able to manage the processing and production of a wide range of mechanical components from 10 mm to 450 mm in diameter, with lengths up to 1200 mm. We work in stainless steel, all the 300 and 400 series, and other types of materials such as: Alloy steel, Aluminum and its alloys, Copper, Brass and bronze, Plastic, Super alloys and cast iron. Quality control is the primary strategic objective of the production process and guarantees requirements met for each product component. Each step of the quality control process is verified by the instruments most suitable for a particular control. Among our measuring equipment, we count a portable arm CMMs which is an accurate gauge. This tool allows us to optimize the processes of control and dimensional analysis processes and moreover gives us the opportunity to compare the opportunity to compare the products with the related technical drawing. To provide the best service we follow the details of all manufacturing and production processes, from raw material to finished product, taking advantage of partner companies to perform operations such as surface and heat treatment, grinding and painting. Our philosophy is expressed through passion for our work, innovation and reliability. Customer satisfaction, the addition of support and ancillary services, and analysis and solution of problems set us apart from other competitors in the market. On the basis of the policy pursued, we have achieved ambitious goals, among our references it is a prestigious factor to mention the Politecnico of Milan besides important names of Made in Italy for the chemical, electromechanical, packaging, furnishing, health care, Industrial handling, oil & gas, motorcycle and Shipbuilding. We invite you to visit our web site to learn more about our company. Thank you for your attention, we are waiting for your interest in this. Team Officine Gualco Mario, Licia, Werner and William

We are a contract manufacturer for small series and have specialized in the production of aluminum.

We are a young & dynamic team. Thanks to our modern 3 and 5 axis machines and our automation systems from DMG MORI, we specialize in small series and single-part production of the highest quality. We also process almost all materials.

A company that produces machining parts using 4-axis and 5-axis CNC machines, Can process aluminum, steel, stainless steel and plastic parts

The Uwe Kneule GmbH is a versatile family-owned company that has been producing high-quality products in the fields of mechanical engineering, toolmaking, automotive, and aviation for 25 years. With our efficient production facility in Schwabsoien, we deliver quickly and cost-effectively, focusing on the quality and satisfaction of our customers.

Your fastening solutions designed, manufactured and optimized, worldwide

Our strengths lie in the production of hardened and ground precision parts and sockets of 25 -400 mm Ø

The company STN Neugersdorf was founded in 2007. Meanwhile five people are employed. Our main task refers to the precision welding using the TIG process of stainless steel, aluminum and aluminum-magnesium alloys, cast iron, copper, brass, titanium and chromium-nickel. In addition, we weld assemblies according to customer request and requirement in the MIG and MAG welding using the latest processor-controlled and water-cooled, double-pulsed Rehm and Cloos systems. Furthermore, we are able to solder galvanized steel sheets also MIG and TIG, as the brazing of hard metals and cast iron with special silver solders. Orders in resistance spot welding and pressure welding bolts we can meet on time and in large numbers. Our factory is checked for all welding according to DIN EN 287-1 and DIN EN ISO 9606-02. In addition, we also offer the Salzbadbrünieren of steel parts for the tool and mechanical engineering. For inquiries, as well as sample production we are at any time. Please visit us on the Internet at: www.schweisstechnik-neugersdorf.de You will find numerous product and production examples, and our reference.

Located in the Mida Business Center, in Trofa, Pontec - Mecânica Precision, Lda is designed to respond to small and medium series, producing technical parts for various branches of industry. We are a young and dynamic company with a highly qualified team, competent and experienced in the manufacture of high precision components. We carry out with high quality and rigor all kinds of projects related to metalworking: • We perform work in CNC machining centers; • We specialize in milling and turning services; • We are committed to supporting the study, realization, assembly and control of all parts or assemblies in the most diverse areas. • We develop all kinds of articles from the following materials: steel, stainless steel, pvc, aluminum and light alloys; In our organization we have: • A sales team always available to discuss the most advantageous offer for your company; • A study office to develop, design and study the details of your projects; • An industrial team with a level of technical competence that meets your needs; • An efficient and rigorous planning team, able to inform you about delivery times and status of your orders; • A logistics team focused on receiving and shipping your parts in the best condition.

The factory in the Saxon watchmaking town of Glashütte was founded in 1936 by Gerhard Grießbach. Today, the third generation of the company continues to be run by the family. Our range of services ranges from manufacturing and assembly to product development precisely according to your specifications. -Turning, drilling, milling -Micro-turned parts, reworking -Gears (m=0.08 -max m=1.0) -Assemblies- as complete production, as an assembly and complete assemblies, also with electrical. powering -Small batches -Grinding and polishing -Barrel finishing and polishing -Custom-made products/prototyping