With access to a wide range of products and production spectrum in the field of sheet metal processing (perforated sheets, expanded metal mesh, metal mesh, knitted wire mesh, drilled sheets, embossed sheets, demister, metal filters, wire bending parts, ornamental chains), as well as cross-industry knowledge, we are able to optimally to use. We work with qualified partners throughout Germany and parts of Europe, resulting in a fast and professional advice and support is guaranteed.

In our industry, ensuring the highest quality standards depends on smooth workflows. With two elements we stand for this claim: Team spirit and our extensive know-how in steel, aluminum and machining of plastics. We gladly and always set for you! Give us a try! The company "Innovative CNC - Milling" was established on 1 June 2000 founded by Volker difficulty. At the present time, the workforce has 7 employees. Production takes place with a total area of approximately 600 m² in a production hall. The maximum total capacity is approximately 200 machine hours / week. We provide all kinds of high qualified CNC machining in metal and plastic. Our modern machinery and our extensive know-Howbei the machining of stainless steel, aluminum and plastic meets the highest quality standards. Precision is our passion. We are cooperative, flexible, and reliable as they find it only in small establishments. Skills, team spirit and fun at work characterize our workforce. Here are your tasks in the best of hands.

As a contract manufacturing operation in the field of CNC machining, we are equipped with the latest CNC machines and measuring instruments. The company focuses on precision machined parts, in the area of 5-axis simultaneous machining. Production is in the numbers 1-10000, that we are moving in the typical one-off production, prototypes to small batch production. We finished with the claim precision in manufacturing in mechanical engineering, plant engineering, medical, pharmaceutical, chemical, aerospace, tooling, IT industry, defense, electronics, automotive, fuel cell research and work with various research institutes together. As a contract manufacturer, we also offer ultrasound-assisted milling (Ultrasonic). We ((Aluoxid), tungsten carbide, zirconia, carbides, nitrides, etc., such as glass, ceramic) is milled with diamond tools in the so called Advanced Materials. So far we have the following materials processed in the hard state as: Pane glass, Zerodur, variousHard metals, ceramics (Aluoxid Al2O3), zirconia, silicon carbide, silicon nitride, marble stone, granite, boron carbide, Syalon. In these materials, we also bring in thread from size M3. We offer the following performance profile: - Extended workbench - System Supplier - Technology Supplier - Milling with HSC - Milling with vacuum clamping technology - Mehrachsfräsen (5-axis-simul.) - CAD / CAM workstations (all CAD interfaces) - Wage measuring tactile until cubic 500mm, optical up to 300mm; accuracy jew 1.8 microns - Certification to DIN ISO EN 9001:2000 - Graphite machining - Ultrasonic machining With our employees - all skilled workers and almost all of their own offspring - we will work on our machines all materials such as steel, stainless steel, aluminum, plastic, graphite, Ampco, Kovar, titanium. With our already 20 years of activity, we can draw on a wealth of experience and know-how. Our customers include large-scale industry and medium-sized businesses and small craft.

Microniq Ltd.-From design to production! Our company's main activity is the manufacture and development of custom and mass-produced components, machine elements, design, manufacture and on-site installation of devices. We try to fill our spare capacities by contract manufacturing. We are innovative, creative, precise and highly flexible!

SPANPOWER CNC Precision Parts is the manufacturing specialist for high-quality CNC-manufactured components and assemblies. With our modern machinery, we produce prototypes and series. Our services include CNC turning and milling and wire EDM. Customer-specific surface treatments and module assembly round off our manufacturing options. Our customers come from the fields of plant engineering, mechanical engineering, optics, automotive and aerospace.

Small engineering company with its own design department.

Metallbau Müller GmbH About us: Metallbau Müller GmbH is a medium-sized company that has been active in the metal construction industry for over 10 years. Our company consists of a highly qualified team of three experienced employees who specialize in tailor-made solutions for private and commercial customers. Our services: Design and production: We offer individual planning and manufacturing of metal structures such as stairs, railings, balconies, window and door frames. Assembly: Our team performs professional assembly work to ensure that every project meets the highest standards. Maintenance and repair: We service and repair existing metal structures to ensure their durability and safety. Our philosophy: At Metallbau Lars Dietze, quality is paramount. We place great value on precise craftsmanship, reliable adherence to deadlines and close cooperation with our customers. Our philosophy is based on sustainability and environmental awareness, which is why we rely on high-quality, durable materials and use resources sparingly.

The production of a die follows a long process: it starts with the conception of the object, moving through a process simulation aimed at studying the stamping method. Once agreed upon with the client based on production volumes and the designated presses, the design phase begins, which M.C.S. prides itself on for its precision. The manufacturing of the equipment is then immediately undertaken, coordinated by a thorough analysis of the process. M.C.S. also manufactures dies based on designs provided by the client, as is common in the automotive sector. M.C.S. specializes in the construction of dies for the automotive and home appliance sectors, but any sheet metal part can be produced by our team. You design a sheet metal product, and we will manufacture it for you. We handle single-stroke dies, progressive dies, and transfer dies, cooperating to fine-tune the part handling process. Our production flexibility enables us to engage in automatic production of both small and large series of parts with dimensions up to 3 meters, as well as in low-volume production using manual recovery dies. We rely on a team of highly skilled and experienced professionals in the field. One of M.C.S.'s unique characteristics is its advanced processing technology, which keeps the company at the forefront of the industry and ensures very high-quality standards Progressive dies:Our most innovative target Transfer dies:We aim to be a comprehensive partner, assisting the client throughout the entire process until production launch Prototype dies:When time constraints challenge us, prototype tools allow for rapid production and/or enable refinement of the stamping methodology study Milling and subcontracted mechanical processing:With our machinery and flexibility, we enthusiastically embrace the timing and technological challenges presented by the market. We have experience in the petrochemical valve sector, metalworking, and complex mechanical components AUTOMOTIVE INDUSTRY Molds for chassis framework and interior body panels Molds for reinforcement brackets, window lift guides, flanges, and mufflers Molds for components of any type Molds for thick sheet metal Molds for heat shields, including those made of aluminum MILLING MACHINE DEPARTMENT The milling machine data is summarized as follows : 3 x 3-axis milling machines with 5-face machining capability, 3000x2200 mm (10,000 rpm) 3 x 5-axis milling machines with a working area of 1750 x 1400 mm (18,000 rpm) 1 x Okuma milling machine for machining hardened steel and superfine finishes (15,000 rpm) 8 x CNC milling machines for parts up to 1600x1200 mm EDM DEPARTMENT The EDM data is summarized as follows: SODICK AQ400L SODICK AQ600L 2 MITSUBISHI MV2400R ONA BIHLER automation for the production of structural elements with steel, aluminum, copper elements

Company founded in 2021. Milling and turning capabilities. Especially machining of aluminium, brass, stainless steel and technical plastics.

High product quality, consistent focus on quality, motivated personnel, efficient operations: These guidelines characterize our company! So we could since the company was founded on 1.8.1998 expand our production capabilities continuously and finished today in modern office and production buildings of 3,000 sqm in 3 layers. Our quality management system according to DIN EN ISO 9001:2008 ensures our customers process safety and impeccable product quality. And for many of our customers is the incoming inspection of long past!

Turning and milling for recovering products.

HSP Schwahlen GmbH was founded in 1945. From on 1951 the production had been focused on adapter and withdrawal sleeves being the basis of our current line. At the beginning of the eighties CNC production of goods having greater dimensions was introduced. HSP supplies all main bearing manufacturers as well as the larger distributors. The standard production range on adapter and withdrawal sleeves, nuts and locking devices is completed by optional hydraulic assistance, abnormal metric inner diameter or complete inch-sized sleeves as well as all specialties based on customer specifications. Besides this we manufacture hydraulic nuts as well as precisely turned and milled thin-walled parts. Since 2000 HSP is also manufacturing various kinds of cages for bearings from 100 - 4000 mm outer diameter in high quality, small lot sizes and variable material (brass, steel, bronze, aluminium, ...) according to customers requirements. In this segment we produce for all main bearing manufacturers. In addition to the production know-how HSP has continuously improved quality, logistics and administration. This leads to the high level of quality, delivery conditions and service of HSP. At our newly built production facility in Langenfeld, established in 2001 and in between extended several times, we manufacture with the latest technology including 3D-measuring equipment. The certification of the quality management system based on DIN EN ISO 9001 and of the environmental management system based on DIN EN ISO 14001 by Lloyd's Register Quality Assurance Limited underlines the endeavour to achieve highest possible precision and satisfaction of our customers as well as the best possible environmental sustainability. HSP product range The HSP production programme covers adapter and withdrawal sleeves, nuts and locking devices with 130 mm up to 3000 mm outer diameter and approx. 600 mm in length. Besides the standard we offer the following: • Sleeves with abnormal bores and threads, metric / inch dimensions, special materials, ... • Production according to customer specification respectively to drawings • Special surface treatment (e.g. phosphating) • Longterm packaging • Direct deliveries, global sourcing and other logistical add ons Standards of the HSP production • Adapter sleeves according to ISO 2982-1:1995 (-> DIN 5415:2009-05) • Withdrawal sleeves acc. to ISO 2982-1:1995 (-> DIN 5416:2009-05) • Nuts following ISO 2982-2:2001 (DIN 981:2009-05) • Locking devices acc. to DIN 5406 • Any standard or recommendation of customers by drawing or text Additional products Cages for bearings with complex milling and drilling processes up to 1750 mm outer diameter processed in five axis. HSP is not limited to any design according to customer requirements. Most ferrous material can be machined (brass, bronze, steel, aluminium, etc.).

We are the German sales company of the KUAN YI Group. The company was founded in Taiwan in 1989 and today consists of 7 production sites with over 2,000 production machines and 1,200 employees in Asia. We take care of customs clearance and fast delivery within a few days from our production sites.

Ottani Meccanica represents more than 50 years ago small high precision parts. The company has grown over the years and has specialized until receipt of the current structure, which is structured as follows: HEADQUARTERS and WORK 1: Here are a machine park of 50 lathes (the cam-controlled single-spindle, movable CNC headstock machine, cam-controlled and CNC Mehrspindeldrehautomaten- including a INDEX MS-40 C - includes) the mechanical machining of precision rotating on a covered area of over 4000 m² made. FACTORY 2: this is just a few meters from the headquarters and extends over a covered area of 800 m², dedicated to the assembly of tested and packaged according to individual customer requirements sub-units and / or finished units.

Bliss-Bret a.s. is a 100% daughter company of SCMBLISS and Bret and member of the HACO-GROUP. Thanks to an experience of more than 100 years in the construction of press machines we became the specialist in welding and machining of big constructions and parts. Our workshop is equipped with extensive, modern machines suitable for machining of small and large parts for the complete processing of precision workpieces. To realize your projects we can rely on our motivated team of in house trained technici and engineers. Our know how and continuous focus on improvement results in a live time relationship with our customers.

The company Noblish Carbon GbR is a startup company from the Rhineland. We specialize in CNC machining of carbon plate material. Already from batch size 1, we manufacture prototypes as well as series for the Aerospace, machinery & equipment construction, model building, and more.