Water-jet cutting technique

Water jet cutting 2D 3D all materials up to a size of 8 x 4 m. Columns of PUR to a hardness of 96 ° Shore A machining center 5 axis

Manufacturing without limits: turning, milling, eroding, grinding, engraving, laser marking, ... benefit from our hughe and various collection of machines on four locations. Your stock stads by us - over 4.000 materials, alu, steel, stainless steel, titanium, tec. plastic, ceramic-glass, ... We twist for you - ask for impossibilities, our sheet metal forming realizes it. The word is colorful - our longterm experience of perfect surface finishes. Quality is no accident - our optimized quality management. Save paper, time and nerves - the best quality in the right place at the right time, all from a single source. We look forward to all questions, not only to inquiries. For more than 30 years Mühlbauer AG has been a proven partner for the provision of high quality precision components. It all started with a small lathe, from that we have developed into a globally operating company, which realizes all wishes concerning precision around the globe. From consulting, construction and prototype construction via manufacturing including surface finishing up to the installation of complex single components or whole machines, we have everything you will need for an optimum result.

CNC series machining of turned and milled parts in high quality In our CNC subcontracting division, various cast and forged parts in annual quantities of 1,000 to 1.5 million pieces are machined on CNC machining and turning centers. There are currently 30 machines in use in Amkon's Plant II, which are looked after by our employees in two or three shifts. CNC subcontracting was certified for the first time in 2008 according to the DIN EN ISO 9001 quality management system. In series processing, we attach great importance to consistent product quality. It is therefore a matter of course for us to check and document the manufactured parts accordingly. An air-conditioned precision measuring room with the appropriate measuring technology in the form of measuring equipment and measuring systems is available for this. 3D measuring machine Zeiss DuraMax for measuring all parts in the measuring room Conturograph Optacom VC-10 for measuring complex contours Optical measuring device Hommel opticline C514 for serial measurement of turned parts

A brief introduction We employ metal machinists, a shortage occupation in metal industry nowadays, who produce small series of special parts on traditional machines. In this sector CNC machines are so widely used that there is a shortage of traditional machines and excess demand exists for them. With this in mind, we will purchase several traditional machines during our current developments to increase our capacity in this field. We, of course, have CNC machines as well and develop our machine pool regularly. Based on the orders received, we are able to draw up a production program for 1 month in advance and allocate our resources. Our customers basically include producers which manufacture special purpose machines for their customers (e.g. manufacturers in printing industry, shipyards, industrial scale manufacturers, food producers, automotive industry, manufacturers of medical equipment), and we produce components needed for these machines. BAT tobacco factory is included among our customers, and we manufacture wear/consumable parts required for their daily production. We produce components and subassemblies for medical equipment manufactured by Siemens and GE factories. Besides, we supply units for robotic production lines of AUDI and VW factories. The company had its first premises at the residence of the founders in Pécs. Production took place in a small workshop. At the beginning temporary workers were working in addition to a single permanent worker. The first orders we received involved simple processing of materials. In addition to manufacturing new products, we undertook and still undertake to carry out repair works. We undertook all works therefore outgrew the small workshop we used at the beginning, and in 2007 at Pécs-Hird we acquired our first production hall suitable for carrying out industrial activities with a floor space of approximately 250 m2. Here we were able to carry out production on a larger scale and serve more customers. Owing to our continuous progress and current developments, now the floor area of the production hall exceeds 1000 m2. Concerning work organization, our activities include manufacture and assembly of special-purpose products, machines and machine units. Therefore our machines and equipment are universal and able to satisfy all demands.

Your partner in mechanical subcontracting We offer a subcontracting service for mechanical components and assembled machines, in which, starting from the customer's project, we study its industrialization, we identify the most suitable production process, we rely on the most suitable suppliers for each individual production phase.

Our product range includes gaskets, flat and preformed membranes in any kind of rubberized textile or plain rubber, molded rubber gaskets in any specific compound and hardness, extruded profiles, assorted gaskets, O-rings in both standard and metric size, shock-proof lip seals to be used also in high pressure and extreme environments, gaskets for internal combustion engines, state-of-the-art multilayered products, gaskets with silicone creases and surface treatments, ceramic fiber panels, insulating mats, sound insulation and sound absorbing panels, gaskets for refrigeration compressors, gaskets for industrial systems, spiral wound gaskets with or without centering rings, metal-plastic productions, oval and octagonal ring Joints in any type of metal, roves and washers made of any raw material with or without surface treatments, rubber mousse gaskets, assorted smallware.

Joopone, founded in July 2013, is a specialized healthcare, R&D and manufacturing company, probably the only one in the Balkan. JOOPONE is a company with 70 employees.Our clear and compelling mission is to provide customer driven solutions, performing at the highest level, always learning and looking for ways to improve. Joopone achieved a system that helps and supports the work, and improves the levels of customer satisfaction by adopting an approach that starts to implement more efficient working practices and focuses on the business objectives of the company, through implementation of ISO Quality Management System Standards.

We are pleased to introduce Next Level Robotics - your expert partner for advanced metalworking. With two decades of industry experience and a team of highly qualified specialists, we are the first port of call for precise and reliable manufacturing services. Our comprehensive service portfolio in the field of CNC solutions covers the entire range of state-of-the-art machining technologies: - CNC machining centres: from versatile 3-axis machines to high-precision 4- and 5-axis vertical machining centres that realise even the most complex geometries with maximum accuracy. - Specialised machining: Precision lathes and milling machines, wire erosion (electrical discharge machining) for the finest cuts, horizontal boring machines and specialised Swiss screw machines for demanding small parts. - Sheet metal processing: State-of-the-art laser cutting machines as well as bending and folding presses for flexible and precise sheet metal processing. We also offer you a comprehensive service package that goes beyond pure machining: - Welding: professional welding solutions for robust connections. - Heat treatment: Optimisation of material properties for maximum performance and durability. - Coating & painting: High-quality surface finishes that combine protection and aesthetics. We attach great importance to offering you not only excellent quality standards, but also attractive conditions and comprehensive availability.

You want to focus even more on their core competencies? They want to keep their fixed costs and low investment requirements? We will help you by taking over a part of your production. The Rädisch GmbH is a specialist for sheet metal working processes of any complexity and is characterized by its extreme vertical integration. Our services range from individual production in small batch size on mass production to the development, manufacture and supply of complete assemblies, including eg of complex material handling systems. Our clients are mainly from the transport and vehicle industry, the machinery and plant engineering, material handling, retail and consumer goods industries. You will appreciate the simple, reliable co- working with Rädisch and rely on the uncompromising Quality of our products and solutions.

AS IRM is a metal working company with years of experience that specialises in: subcontract metalworking (milling, turning, grinding, welding, painting) mold form production custom equipment (development and production of machinery and equipment upon request) saw grinding, sharpening and adjustable equipment for the woodworking industry AS IRM was established in 1959 as subsidiary of AS ALFA and in 1993 as an independent enterprise, later in 1996 as a joint stock-company. Our extensive expertise gained through years of experience has enabled us to provide the highest quality service to our customers. We work with companies of all sizes (small, medium, large). Our business partners are mostly based in Germany, Finland, Latvia Services: Metalworking: Turning Milling Grinding Mold form Punching Bending Engraving Welding Coating: Powder coating Surface treatment Aluminum surface treatment: anodization - natural, black, color Cutting instruments sharpening & surface hardening

Göcke Umformtechnik: customized and intelligent Göcke-Umformtechnik - the guarantee of conscientious, precise and punctual order handling, whether the contracts come from small, medium-sized or large-scale industry. As a supplier of so-called semifinished products we offer a crucial time advantage in steel, stainless steel or aluminium. Modern mass production in sheet steel working unfortunately leaves little room for customized solutions. We have therefore come to specialize in the working of unusual flanged profiles. Over a production area of around 35,000 square metres we offer with our many years of experience a professional alternative and a comprehensive all-round service. A total of 135 employees combine state-of-the-art DNC technology, machine professionalism and peak performance.

METAL SERVICE LOGISTICS Delivery range: • blanks (laser, punching, firing) • Laser cutting of pipe / profile • Edges, folds, round bends • welding, points, grinding • Conventional and CNC machining • Module assembly • Riveting, pressing, gluing, sealing • Delivery incl. All surface treatments • Coordination / Organization of contracts • technological consulting regarding manufacturing costs and process optimization • Assembly and manufacturing documentation • Sample and prototype production • Compilation of mounting kits according to instructions • Quality assurance and documentation • Partial finish and ultrasonic cleaning • Part-specific packaging solutions • Warehousing and documentation • customer-oriented logistics included Just-in-time delivery • short-term delivery of spare parts at blanket orders • Delivery on behalf of the customer

Pappert Hydrocut GmbH & Co. KG operates as a service provider in the field of water jet cutting There are materials separately without thermal influence Hardness increases and delays, dripping or melting slags not arise here The following materials can be processed: Aluminum, stainless steel, copper, brass, steel, spring steel, titanium, Hastelloy, granite, glass, fiberglass, foams, plastics and all composites Material thickness of 0.05 mm to 250mm. We have the option of three dimensional contours on a working surface of 6,000 mm X3.000mm to edit

We have been manufacturing small and large series seals for the entire industry since 2001.

Metal construction, welding work, water jet cutting, CNC machining,

The FME company is a supply firm for precision mechanics and medical technology. We offer everything concerned with precision mechanics, from series prototype to complete subassemblies ready to install.

Our orders come mainly from companies in the mechanical engineering, medical technology, electrical and automotive industries. But we also fulfill individual wishes for private prospects