We are a company founded in 1987 in Iffezheim, owner-managed company and are dedicated to the industrial contract manufacturing. Schneider & Gemsa provides specific and professional solutions for customers in the automotive, industrial, electrical, electronics, renewable energy, electric automotive, telecommunications, and medicine. The range of contract manufacturing ranges from the single production of the construction group production through to complete production of devices and complete system solutions. With our locations in Germany, the Czech Republic and Romania, but also through cooperation in the Far East, we are able to offer cost-optimal solutions and market-based performance. Through our collaboration with a supervised workshop for disabled people, we take our social responsibility seriously. Schneider & Gemsa has decades of expertise in the fields of mechanics, electronics and mechatronics.Since its founding more than 150 million electric linear actuators, mechanical and electrical assemblies and terminals were manufactured. Moreover, in a modern wire strands, data control cables and wiring harnesses with innovative technologies and modern machines and tools are manufactured. Our manufacturing priorities include eg • Manual assembly with safe processes • Semi-automated assembly • Fully automated assembly • assembly of complex devices • harnessing of single lines • production of cable harnesses and wire harnesses • Manufacture of measuring and test leads • cabinet • preparation of the required equipment, tools, test and Manufacturing facilities As a system supplier we can therefore offer all manufacturing services that are needed by the product design. In addition, we offer all the necessary consulting and implementation services in connection with manufacturing outsourcing and production relocation. We consider quality as an integral part of all activities and strive for continuous improvement in all processes. The company operates according to a quality management system according to the standards of DIN EN ISO 9001-2008 and ISO / TS 16949:2009 (Automotive) certified. As of May 2012, we will certify our environmental management system according to DIN ISO 14001:2009.

As an up-and-coming steel and sheet metal processing company, GB is known for fairness, speed and delivery reliability. The aim is to further improve the quality, efficiency and reliability of production through constant further development.

The ASD engineering has specialized in the area of individual production of machine components, as well as small and medium series for almost all areas of mechanical engineering, special purpose machine and related industries around the metal processing. We loaded and processed but also plastics and non-metals. We deliver the complete part or the complete package with all the surface requirements and other requirements such as printing, embossing, labeling, etc. Individual Manufacturing The ASD Engineering manufactures you put your items according to drawings or on request by sketch. However, it is important to learn from you, the boundary conditions, so that a very good or better an excellent result. Milled parts up to a length of 1600 mm and turned parts up to a diameter of 600 mm, we can perform by finishing with all requirements of surface finish to special treatments such as anodizing or many other species.We deal with any machinable materials and leave us even when impossible demands something. We can also produce items made of sheet metal or as welded plate assembly including surface. You can trust us with sensitive requirements. Our customers in optics and metrology know, be that in ASD parts touched with "kid gloves" and well packaged. Our employees are highly qualified, of course, and sensitized in dealing with precision in the thousandths range, but also know the requirements can not be interpreted by the drawing is clearly evident in features. Series production The ASD engineering customized for you, even small and medium-sized series of lathes, milling machines - and sheet metal parts. With such highly complex parts, which generate in a large organization considerable administrative work at relatively small numbers and block the flow of production, we are the right partner.We are the service provider who supports your productivity, where he relieves you of the "productivity killer". Our business model is the lean organization with shortest paths and high information quality that characterizes us. You get the highest quality with minimal administrative effort. But even for companies who themselves have no production, we are the partner par excellence. We not only manufacture according to drawing, but also assist you in the design production-oriented "set up" for your part incl surface. Production and assembly of components The ASD Engineering also provides you with the manufacture and assembly of complete assemblies. These include welded assemblies or assembly units according to your wishes or with our assistance if you can describe to us exactly how the required function presents. We manufacture and procure the necessary parts and thereby also logistical tasks. Wish we can also obstruct parts provided, such as motors, pneumatic or electric elements orelectronic components. In cooperation with an external service provider, we also realize automation tasks and functional tests of the individual components. Please feel free to contact us for your requirement. We will find a solution!

The company has been dedicated for more than 30 years of development and production of complex tools for stamping and forming. From the initial idea, through development and construction, the prototype to series production, you can have things under one roof. As a contract manufacturer we are happy to produce for you from small series to mass production - exactly the number of pieces that you need. We manufacture tools for stamping and metal forming. With precision - in perfection! From a simple hole tool, to complex progressive dies, be carried out at the various feeding stations cut hole and bending operations. Tools with 3-D machined flexures and actuated valve cross-inclined punch are part of our range of services, such as drawing tools for the production of sheet metal parts, which can accommodate precision ball bearings. In addition, we produce tools for smooth cutting and trimming products, final ridge and straightening tools for casting and die casting industry.EDM and CNC milling operations are carried out as contract manufacturing. PROTOTYPES AND ZERO SERIES: CREATING KNOWLEDGE IMPRESSION. We focus on holistic development of forming tools. To make your ideas "grasp", we use the method of rapid prototyping. Through rapid prototyping, we are able to quickly show our clients a prototype of its desired stamped and / or formed part. Once the tool to enable us to run a first pilot series in our home. The knowledge gained in Sheet Metal Forming the first edition then - if necessary - used to optimize the tool for serial production. For the production of the prototype, we use a different method. Production tests can be performed with a A geo-test press with 125 tons of pressure and production presses with a pressing force of up to 400 tons. Can be used for composite tools with a total length of up to 2500 mm. Complex shapes, intricate geometries or simple tool requirements - precision is required for each tool. The combination of many years of know how with the necessary care can arise daily quality products in our home. Modern technology is a critical performance factor in the construction of tools. Customers can therefore be confident that their tool is manufactured to ultra-modern machines. For multi-axis machining centers with automatic tool changers provide for economic production. For the testing of tools including a Ageo-test press with 125 tons of pressure and production presses up to 400 tons of pressure available to us. Homepage: www.volkergehlen.de Homepage: www.schulte-press.de

BAUR METAL TECHNOLOGY is a medium-sized family, the ever-located since 1980 in the expansion. The company founder Manfred Baur stood at the beginning two employees to the side. Due to the development of the company moved in 1997 from Weissach im Tal-break after Unteraspach, the original 250 m2 production area were tripled in a new building. In several stages, the production area was expanded to today 2000 m2. The current MB-team of 10 employees leads customer orders still just as promptly and flexibly through, like 20 years ago. The metal is still the core business of Markus Baur. By investing in machinery that Leistungssprektrum is constantly being expanded. Products: We produce samples of parts, small-medium series in the area turning milling drilling, turn (10 mm to 80 mm and a length of 650 mm), mill (10 mm to 1 560 mm, width 10 mm to 750 mm, height 2 mm to 750 mm Speed ���up to 10 000 1/min). The production of steel, aluminum and V2A modules on our 3D welding hole table length 50 mm x width 50 mm height 50 mm, up to 2500 mm wide x 2500 mm high x 12 500 mm long, with partial machining CNC and lacquering in our paint shop ev mounting. We can weld steel, aluminum andn V2A TIG, MAG welding workshop DIN 18800 part 7, our authorization for the production of oil-bottom trays according to WHG § 19I is up to date Steel sheet blanks of 1.5 mm to 10 mm (to a length of 3000 mm / V2A 1.5 mm to 6.0 mm to 3000 mm.) Our paint shop was extended and modernized in 2008, the painting of small parts (width 100 mm x High 100 mm x length 100 mm) and machine components, cabinets, furniture, truck vintage cars, trucks, containers, machinery, etc. is available with different coating processes possible, eg : spray gun, Ayrlis high and low pressure possible (Dimensions: Width 4000 mm Height 3700 mm Length 12 500 mm). We manufacture special-tow bars for cars and trucks with TÜV certificate seit1998. - Gantry crane up to 4.5 T, forklifts from 1.5 to 6.0 tons. - At the programming station DXF files can be edited. Everything in one hand Planning & Construction Advice Production Delivery Assembly Customer Care

Consulting, development and production of means of production, machines and components from engineering to manufacturing detail to the complete system, we assume responsibility for the project. Sheet metal working: Your manufacturer of precision parts, assemblies, and partner for complex manufacturing solutions in sheet metal processing. The flexibility of the plants, together with the creativity of professionals enables new solutions. Manufacturing noble parts: Design and fabrication of components, series and pre-finished assemblies including post-treatment, logistics and functional test. Sharpening and Rental Service: The sharpening of ABB is your guarantee for cutting tools of the highest quality. Both the sharpening of standard and special tools, as well as in the procurement of new tools you need to make any compromises. Our rental services for measuring instruments, standard and special tools offers a wide selection at very attractive terms.It is much more economical for you to rent from us than to buy rare and short-run and manage resources. These include in particular oversized tools and measuring equipment that you can find and hire. Heat treatment: The services offered by the heat treatment comprises the traditional methods such as annealing, hardening, tempering in an open atmosphere, an inert gas or vacuum. In addition, we offer special techniques such as nitrocarburization, an environmentally friendly surface hardening process, with impressive characteristics, as well as the necessary pre-and post-treatments. A unique service we offer regarding expertise and infrastructure in the tempering of aluminum alloys. Translation by Google Translate

Emre Makina founded at 2004 in Bursa and it has a powerfull design team, test, control, mounting apparatus, special machine, conveyor and etc... Our objective to obtain is making solution for our customers with special equipment manufacturing. The company name was changed to Arge-Emre MakinaLtd. Şti in 2012. We haveISO 9001-2015 Quality Management System. We serve the best quality with our expert personnel. We have developed to meet the needs of our customers through quality growing business volume and client portfolio.

AB Umega is one of the largest metal processing companies in Lithuania. Company is focusing on technology, products development to meet the end-user expectations and needs. Employees are highly skilled; products are produced from high quality materials, using the innovative technology; all this leads to high level of quality, reliability and durability Our experience working with Western Europe companies is over 15 years. The majority of orders comes from foreign customers and partners. We are always looking for new ways how to improve our business, how to be more flexible and effective and we are constantly looking for new partnership opportunities with new customers. We are open to the various cooperation proposals and we believe we can start mutually beneficial cooperation for your company. We are skilled in various kind of Sheet Metal processing (CNC cutting, bending, punching, stamping, deep drawing), Mechanical processing (CNC milling, turning, grinding and etc.), Welding (robot MIG/MAG, manual MIG/MAG/TIG, spot, stud) and many other technologies Surface preparation and coating, Casting, Thermal treatment. We are also able to design and produce various tooling equipment. We offer reliable, high quality metal processing subcontracting service. We suggest you to try our service prices and technologies by sending us few trial calculations and together evaluate partnership opportunities. Many mutually valuable relations have started this way.

Due to the wide range of production the Giggel GmbH is a competent supplier to the automotive industry and manufactures for the prototype development of all metal and plastics processing industries. Quality, high flexibility, short delivery times, as well as innovative manufacturing processes set us apart. Our ranges include: • Prototyping / Low Volume Production • Construction (Pro Engineer / Catia) • Programming (Tebis / Work-NC / TruTops) Mechanical processing: • Machining of aluminum, steel, stainless steel and light metal alloys • 3-axis / 5-axis / 5-axis simultaneous milling / CNC turning Forming: • /font

Sport silencer Eisenmann Exhaust Systems GmbH: That is handcrafted perfection of stainless steel. Solutions that fascinate in processing, function, design and sound. - Driven by sound - our motto combines the Eisenmann Exhaust Systems GmbH, has established a partnership with the national and international motorsport. Indicator of this is the committed sponsoring successful racing teams. Translation by Google Translate

PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.

Since June 2007 we have been working independently in machine and fixture construction as well as in contract machining. Our area of competence lies in the processing of customer-specific orders in general mechanical engineering, tool and mold making as well as special machine construction. We manufacture various components made of steel, stainless steel, aluminum, cast iron and plastics on our modern machines. We can also machine the most difficult components with up to 5 axes on our processing machines, with quantities of 1- 5000 pieces. cover.

HSC CONTOUR GmbH is a service provider to develop. Construction and HSC machining model, devices and tools for aluminum and plastics industry, as well as for high-speed cutting of any materials and technical components.

The family company with a lot of passion for precision, quality and customer satisfaction. Sirius Maribor d. o. o. (Limited Liability Company) was founded and registered in the District Court of Maribor on October 30 2003. When founded, Sirius Maribor employed 20 workers who produced equipment and technological functional units intended to customers in Austria, as well as in Slovenia (approximately 10 %). The number of employees has risen to 70 due to encouraging work results and increasing demand for our products.

The company Karl Rieker KG was founded in 1936 as a hardware store. Over the years and decades, our focus shifted to the Manufacture of fabricated metal products, in particular the Beschlägebau for furniture and kitchen furniture. Our products in the furniture fittings based on own developments or to customer requests for drawing. Due to the existing machinery we are also capable of other Industries to operate. Punching from coil, lasers, welding on robots, assembly work of assemblies and final inspection, machining of metals. Constructions of new products on 3D CAD systems and a separate tool construction for stamping progressive dies, jigs and fixtures is available. Surface treatment: electroplating, galvanizing, powder coating, painting with long-term partner companies

The core competence is the cutting CNC machining of metals and plastics for turning, milling, drilling, sawing, grinding and EDM sinking. In addition, modules can be made to apparatus, tools or complete machines. There is also the possibility of aluminum Kokillengusses and sheet metal working with the technologies of punching and pulling each with its own tool. In addition, CAD design services are offered based on 3D models. The data exchange with all major CAD formats is possible.