We are Slovak company with 28years of experience in producing of parts for boilers and boilers itself, we have a lot of cappabilities in technical production. Our technologies: Laser cutting of sheets - 3 machines are available / max. dimensions of the semi-finished product 1500x3000 / Sheet metal punching - 1 machine is available / max. dimensions of the semi-finished product 1500x3000 / Sheet metal shears - 1 machine is available / max. edge length 600 mm / Sawing of material - 3 machines are available / up to D260 mm / Sheet metal edging - 4 machines are available - automated edging is also possible / max. hemming length of the semi-finished product 1000 mm 1x 2500 mm 2x, 3000 mm 1x / Sheet metal bending - 2 machines are available / diameter D70 mm - D1000 mm, max. edge width up to 1000 mm / Pipe bending - 1 machine is available / dimensions 1/2" to 1" / Thread cutting - 1 machine is available /from M5 to 6/4"/ Assembly welding - robotic - 4 machines / 8 workstations / / max. reach radius 1500 mm / Assembly welding - by hand / 11 workplaces / / MIG - MAG, TIG welding technologies / Spot welding of subassemblies - 2 spotting machines are available Bolt spot welding - 2 machines are available Air and water pressurization Painting with wet paint / water-dilutable ecological paint is used / Powder coating - varnish. line / max. part size 1500x1800 mm / Assembling assemblies and subassemblies / area - 1200 m2 / Final packaging of products - 2 machines are available

We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes

“Welcome to WUM — your specialist for precise milling of large parts! We are a small company that specializes in providing high-quality milling solutions for large parts. With our many years of experience and technical know-how, we deliver tailor-made solutions that meet the requirements of our customers.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

We have extensive industry experience. Our customers come from the fields of aviation technology, rail traffic, protection and defense technology, agricultural machinery, measurement and control technology and general machine, plant and vehicle construction. The products we manufacture are mainly welded and CNC-machined special parts, such as brake, clutch and transmission parts for rail vehicles all over the world (Transrapid maglev train, locomotives). What is decisive for our customers is the high product quality and precision with which we manufacture the components as well as their on-time completion and delivery.

Focus on stainless steel and sheet metal forming using laser technology for economic cutting, joining and marking. Provider of all services related to sheet metal: Design, programming, produce, assemble, deliver Core competencies: - Laser-accessible design know-how - Fixture, prototype production, series production - Scratch-free and require no post-processing Machining processes: - Punching, laser cutting, forming and sheet thickness 12mm - Folding up to 3m length parts - Pressing threaded bolts and threaded nuts - Laser Welding - Manual welding jobs for steel and aluminum - Surface treatment - Surface coatings - Assembly activities - Logistics Industries and Applications: Hotel and Catering Equipment - Baking machines and Backgräte - Coffee machines - Dishwashers - Hoods - Wash room facilities Shop fittings - POS Systems - Sales counters, advertising Machinery and Plant - Machine Tool Parts - Packaging machine parts Medical - Operating room equipment - Medical devices Pharmaceutical and Biotechnikanlagen - Machine and housing parts Energy sector - Photovoltaic Systems Food Processing Machinery - Bakery machinery - Filling machines and equipment

We are a Slovenian long-established company, which already more than ten years in the Metal processing industry is represented. We are engaged in the production of Fasteners, such as screws and ornamental elements for the furniture industry. The Our products are manufactured using CNC lathes, automatic lathes and Machines, which are necessary for a postprocessing of our products. Our Company is also specialized in the roles of threads in all shapes and sizes. We also offer the opportunity to galvanize or bronzing products. After Wish we pack products also. Our products can according to your request individually or according to standard specifications be made. In our company, we are aware that the price of the Is directed to the quality and appearance of the final product. That is why we continually strive our Products to improve and at the same time produce favorable for the buyer.

Allow us to introduce ourselves to you. We are your expert partner for stamping and bending products. Since 1983, we have been running a state-of-the-art tool and mould making operation for all branches of industry. The tools and moulds we produce are based either on our own designs or plans provided to us. Naturally, CNC wire cut EDM, die sink EDM, start hole drilling, milling, grinding, and chamfering are all covered in our fabrication. Besides the tool and mould making operations we also have a stamping shop and a bending shop from 10 – 315 t, and a deep drawing press from 20 – 320 t as well as various bending machines. Two fully-automatic welding robots as well as CNC processing centres count as one of our newest acquisitions. Our fabrication range consists of: - Tool and mould making - Stamp and bending products - Drawn and coined products - Clamping and fastening elements - Load securing - System construction - Welded components - Construction of complete component assemblies We make these products from a variety of materials according to samples or drawings. We’ll be glad to answer your needs with construction and design for the fabrication range detailed above. Our services have been expanded to include a wet painting plant so that our products can be delivered entirely coated, mounted and packaged. In our design studio, we will create the constructions for: - Stamp and cutting tools - Bending tools, deep drawing tools - Specialty machines, equipment construction, gauges All of our production is subject to the quality standard DIN EN ISO 9000:2000.

The projects can be diverse and also particularly challenging, but the results are the same — in superior quality, on schedule and within budget. It is a certainty that you can rely on with h.o. Metallbau.

The ETS Stainless GmbH was founded in 1984 in Stuttgart as ETS Edelstahltechnik Stuttgart. We are a medium-sized company with 4 divisions - Stainless Steel Sheet Metal Working - Metal - Grating Manufacturing - Hot-dip galvanizing and currently employ approximately 60 employees. Our headquarters is located approximately 50 km south of Berlin.

Adoz s.r.o. is a Czech engineering and manufacturing company with over 30 years of experience in precision metalworking and custom production. We specialize in CNC machining, welding, and assembly of components for a wide range of industries, including automotive, energy, construction, mining, and agriculture. Our modern production facilities are equipped with advanced technologies to ensure high-quality output, flexibility in production volumes, and on-time delivery. We work closely with our customers to deliver tailor-made solutions that meet the most demanding technical and quality requirements. Adoz is a trusted partner for all customers, offering reliable cooperation, technical expertise, and a commitment to long-term business relationships.

TP Metallbau GmbH — Your contract manufacturer for sheet metal and steel processing From design to production to assembly — TP Metallbau GmbH is your competent partner for precise contract manufacturing in metal construction. Our focus is on CNC sheet metal processing, in particular in bending and plasma cutting with a quantity of 10 parts or more. With modern machinery, including high-performance folding presses and a plasma cutting system with a cutting thickness of up to 60 mm, we produce steel, stainless steel and aluminum components — quickly, economically and with consistently high quality. Small to large series? No problem Thanks to efficient processes and production in a 2-shift system, series sizes of up to 5,000 parts can also be realized — depending on material thickness, part design and the desired time frame. An overview of our services: Plasma cutting up to 60 mm material thickness CNC bending and bending Series production of 10 to 5,000 pieces Support with design and drawing (upon request) Our customers appreciate short response times, personal contacts and the flexibility of an owner-managed business. Whether regional or supra-regional — we are reliably by your side. Inquire now — we are looking forward to your project.

MEBATEC is your specialist for sheet-metal-production and high quality enclosures.

Polytech-lab is a center that inherits the tradition of three generations of designers and manufacturers. Our vocation is to provide the theoretical and practical tools for the conception, engineering, implementation and testing of projects ranging from precision mechanics, component technology, industrial design, to architecture and visual arts. The experience gained in the field of traditional construction techniques is combined with a continuous process of research and experimentation aimed at innovative digital design and manufacturing technologies, while an ever-expanding network of partners allows for the organic management of the complex of different phases necessary for the materialization of the project. Indeed, the laboratory provides a network of knowledge embedded in the most important manufacturing realities of the market, matured over decades of fruitful and systematic collaboration. An overall vision of the methodological and pragmatic landscape in the field of drawing and design, together with a layered knowledge of traditional and digital fabrication techniques, passing through a genuine creative flair in the formulation of strategies and the realization of the equipment necessary for the industrialization of the project, are the factors that make Polytech-lab the ideal place to develop and realize your ideas.

Our roots go to the BBC / ABB electron tube factory in Baden, later Lenzburg, back, which sold the ABB Group in 1993 to the Thomson CSF in France. In 1994, the manufacture of electron tubes was transferred to France, only the production of the mechanical parts for electron tubes, including the associated processes, remained in Switzerland and took place in Klingnau a new location. In subsequent years, new businesses have opened up and expanded continuously in Switzerland and neighboring countries. Then in 2009 was the transfer of the production of parts for electron tubes to France and the location Klingnau was taken over by the former Managing Director (Management Buy Out). We offer: Turn Mill Brazing Annealing Heat treatments in mixed gas as contract manufacturing

Ales around industry. All dimensions, for turning, milling cutters, grinding and drilling, we are able To Offer. Welded constructions of all kinds, we are able to 30 000 kg making. Kraus, sro KŘENOVÁ 19 602 00 Brno Czech Republic Region Jihomoravsky (Česká Republika) Phone: +420537014204 Fax: +420537014207 e-mail: jaroslav.dohnal @ krausbrno.cz

Engineering is our " blood group". Our number one priority is to build relationship with bussines partners based on trust. In our field we focus on good quality work. We keep on developing and we try to take advantage of the latest trends not only in production but also in the way we manage our company. Our main strength is quick reaction to given task and AGILE solution of all processes. MACHINING We provide all services in this field. We are prepared for custom-made production and small series production. Machining of steel parts, parts aluminum alloys and stainless steel is our main focus. Providing we will be able to do some operation by ourselves, we will address our partners and get the task done. As for machining of more specific shaped plastic product we are no so experienced and therefore we use approved professionals. Due to modern work management, we are able to reach short delivery times. 100% identification and control of exported parts is the most important operation for us. CUTTING We are experts in shaped parts. We offer laser, plasma and flame cutting. We stock common grades of material, but if the customer has any special request we will try to accommodate him. We are able to arrange water jet cutting. We prefer cutting of aluminum alloys and stainless steel with this technology. We can offer different types of marking parts, for example laser marking and dot peen plate marking. BENDING We enjoy unusual bending . We are equipped by a lot of bending tools. We bend plates up to 15mm, but we are able to arrange bending of thicker material with our partners. We are experienced in design bending without trace of tools mainly for food industry. We are able to bend up to 4 meter long part with thickness of 6mm. WELDING We are focused on MIG/MAG/TIG technology welding. We use precision welding tables which are equipped with many clamping tools. We have no problem with steel constructions, water seal tanks, robot frames atc. We are able to weld smaller parts as well as massive steel construction up to 3 tons. We have a lot of experience with weldments for food industry. We can provide some leak test for example helium test, pressure test and capillary test. We also have some experience with aluminum welding. I the end of this process we run a visual quality check of welds to achieve the best result. SURFACE TREATMENT We can provide bead blasting and glass or ceramic blasting of different parts. We cooperate with partners in galvanizing, hot dip galvanizing and bluing. We are able to provide powder coating of all shades of RAL. We can offer powder coating of small parts as well as huge weldments to maximum weight of 3 HEAT TREATMENT Heat treatment is used mostly to reached to required mechanical and technological properties of metal parts. For this technology we use our professional partners. We offer steel tempering, annealing, hardening, cementation and nitrided.tuns. We are ok with part by part or 1000 pcs series. We can provide anodizing, chromeplating and wet painting.