Technical Parts Plastic parts for industrial applications are manufactured in different processes, sizes and designs: Vacuum forming: * Maximum size 1500mm x 1000mm x form 330mm * Required edge about 1/3 of the total height * No undercuts * Minimum slope form provided 0.5 ° and all edges with radii * Form (Not to exact form page cleaner / mold side) as positive or negative model possible CNC Milling: * Maximum working area 1350mm x 890mm * Post-processing of deep-drawn parts, as Höhenbeschnitt, holes and other shaped cuts * Processing of beiliebigen raw and semi-finished parts made of different plastic materials Bending: * Maximum plate length 2000mm * Material thicknesses up to 12mm * Possible Abkantbreite greater 50mm in order to avoid a longitudinal curvature

Located in the Metrolpolregion Stuttgart, we develop and manufacture for decades a wide range of industrially manufactured products of wire, tube and sheet metal. You will receive individual and customized solutions. From the first conceptual step to delivery, we support with our expert staff. Bent wire parts and technical articles Since 1963, we present ourselves as a modern and competent manufacturer of high quality products made of wire The wire parts are manufactured exactly according to customer's drawings, also in combination with pipe and sheet metal. • Quick and inexpensive, we produce your parts from 2mm to 10mm diameter • made of steel (ST37) or stainless steel (1.4301) • on CNC 3D or 2D bending machines. Our decades of know-how in the wire processing, as well as our own tool and fixture supports fast batch production of your parts. For further processing of your parts, we offer a wide variety of surfaces: • plastic coated • galvanized / plated • Nickel-plated • electrolytically polished • blasted If you wish, our quality control checks, and documents your wire parts up to 100%. We will pack according to your requirements and deliver on time to the required delivery date. Send us your data in formats DXF, DWG or in other 3-D formats (eg SolidWorks, Solid Edge, Catia, Pro-E, etc.).

The spring Technology Group, headquartered in Kaltbrunn produced at 4 locations across Switzerland and has over 80 years of experience in the development and production of springs made of wire and tape, assemblies and mounting hardware. Portfolio: Compression Springs: In the range of dimensions, shapes and finishes. We process wires and rods of 0.2 mm to 20.0 mm in diameter as well as materials with rectangular or square cross-section up to 15 x 15 mm. For the following spring forms we have been established: cylindrical tapered (0.2 to 20.0 mm) biconical fitted barrel and chimney-shaped (0.2 to 3.0 mm) Our specialty: Progressive springs (0.2 to 3.0 mm) Extension Springs: In the range of dimensions, shapes and finishes. Oesenform according to customer requirements. We use different materials in the wire diameter range from 0.2 to about 10 mm; 10 mm to 16 mm without lugs, but with tabs or threaded inserts. Rotation and torsion springs: in the range of dimensions, shapes and finishes. The combination of turns, thighs and shapes are virtually no limits. We process materials round, square and flat wire diameter range from 0.2 to about 6 mm. Larger wire diameter on request. Bent wire parts: We have an excellent infrastructure for the production of wire bending parts in a variety of shapes and finishes for medium and large series. We process materials in the diameter range from 0.2 mm to about 6 mm. Flat springs: leaf springs are metal mold parts which possess elastic properties, to clamp, hold or rest. The great diversity requires an enormous mobility and overview. We use different materials in thickness from 0.1 mm to 4 mm, width up to 300 mm (cold or hot worked). Other dimensions on request. Processing in hard condition or processing in soft condition with subsequent tempering.We manufacture flat spiral springs and disc springs. Stampings: We develop and manufacture for you Stampings according to your wishes and requirements. We advise you from the design to the mature part series. Our modern prototype workshop provides you with a short first sampling. The necessary tools are manufactured in our own workshop and our new punching and bending machines manufacture your parts at high speeds with maximum precision. Material thickness: Thickness 0.1 mm to 3 mm, Width up to 160 mm. Materials: For the production of your springs we process the different materials. - Alloyed and non-alloyed steel - Stainless steel - Copper and wrought copper alloys - Heat-resistant spring material

We are a small, in the area round, and flat grinding well qualified company in southern Germany. We specialize in the manufacture of precision components mainly made of tool steel and carbide. We also offer good skills in turning and milling. We are fast, innovative, flexible - good in price and quality

"WE ARE WORKING ON THE ACHIEVEMENTS" Grueber springs, this name stands in the rail industry worldwide-conformal and repeatable quality steel springs. With 180 employees, produces Grueber per year, approximately 9000 tons of steel springs and bent parts, and achieves a turnover in 2012 of about 34 million euros. A quarter of the production is for the rail industry. Well-known international manufacturers of railway equipment put on the quality of Grueber springs. Thus, at the booth this year to see springs for the • double-decker Stadler - DOSTO, • the Italian high speed train Frecciarossa 1000 (Bombardier / AnsaldoBreda) • the Siemens trains Lastotschka for the Olympic Winter Games in Sochi, • coaches of Indian Rail, • and the tilting ICEs of Alstom, which are set in a DB. Of special requirements for the space over low-temperature resistance to extreme corrosion protection requirements solutions are presented that Grueber has worked with its customers. A brand new development in the field of web application are heavy springs from inconstant wire. This construction enables a progressive course of the spring characteristic. In operation, the trains at low loading are soft suspension, whereas with increasing loading the suspension is harder. The resulting pressure force of a spring differs depending on the position of the spring ends from getting on the geometric center line. Under load, the springs have a tendency to shift vertically. Accurate measurements of the transverse deflection and paired set of springs with the same behavior ensure in the primary spring stage uniform load distribution in the bogie for optimum quality and high safety against derailment and ensure in the secondary suspension stage for a symmetric status of development on the bogie to comply with the allowable light room. Move rotary motion of the bogie in curves and traveling through switches the secondary spring is forced into an S-shape.Nevertheless, the spring coils should not touch and do not lift the spring ends. Extensive testing methods ensure at Grueber for the safe operation of the component spring in practical operation.

We are specialised in springs, wire parts, and metal assemblies.

On our precision and quality you can set. We offer a broad, comprehensive portfolio of technical feathers. Thanks to our flexible manufacturing capabilities, we are able to produce your individual components. Whether it is flat spring components or complex three-dimensional curved shapes of wire and strip steel - we produce the optimal solution for your claim. No matter whether you need a one off, a small, medium or large series, Search or advice in the preparation of prototypes. Make our many years of experience to your direct benefit!

see for yourself

Do you need punched parts on the strip? With or without galvanic surface refinement? We specialize in the production of complex punching and bending parts, especially in the miniature sector, on the belt. The parts are rolled up on reels and can be integrated directly into the production process. As a partner of well-known companies in the electrical and automotive industry, we manufacture on our punching and bending machines from all common non-ferrous metals (as far as they are suitable for punching and bending). The typical end products include, for example, miniature switches, also with the required surface treatment. We process all non-ferrous metals for your application, eg: > Copper > Brass > Bronze > Stainless steels > Blank or even refined (eg, silver, gold, tin, zinc, etc.) > Individual according to your requirements, please ask us.

Eggers Components GmbH — Your partner for CNC machining with a future Eggers Components GmbH has invested specifically in the area of high-precision CNC machining and expanded it into one of our core areas of expertise. With modern machines, qualified specialists and an expanded technology portfolio, we now offer our customers even more options for demanding manufacturing projects. Our CNC competencies: Processing of copper, aluminum, stainless steel, titanium, tungsten and high-strength materials Manufacture of prototypes, small series and series components Specialization in materials that are difficult to machine Highest cleanliness, traceability and quality assurance — ideal for medical technology, X-ray technology, lighting technology and safety-critical industries Why Eggers Components? Targeted investments in cutting-edge CNC technology Experienced specialists for precision and reliability Flexible manufacturing depth — from individual parts to assemblies Innovative processes through research collaborations With these investments, we have sustainably expanded our range of services and today offer you precision, innovation and reliability — everything from a single source. 👉 Contact us — we look forward to successfully implementing your projects!

The BLG srls manufactures steel wire-mesh grids in all geometrical forms and shapes for a wide range of shelvings end exhibitions stands for industry and trade. Production is mainly on bulk contract-basis as well as costom-made supplies. the Blg 's wire-grid products are directed to producers and suppliers of paint brushes, metal furniture, shelvings and exhibition stands to sales outlet of all kinds and sizes. Diameters used from 2 mm to 10 mm

Complex tube processing for medicine, water, air conditioning, industry and automobiles

Even today, in times of globalization, Kögel presents itself as a successful, owner-managed company with tradition and modern know-how. The core competence of the company lies in the development and production of all kinds of metal parts. Innovative products for a wide variety of industries and purposes for international customers are manufactured on over 10,000 square meters of high-tech production facilities. In addition to its own successful range of products, Kögel is an experienced and competent partner when it comes to the development and manufacture of individual customer solutions. From individual solutions to large series, from development to service, Kögel has been supporting its partners with all of its resources since 1948. Kögel - guarantee for the highest quality!

Production of printing, train, torsion springs, bent wire parts in batch, small-and large-scale production of all common materials, such as Federst. Variety DH, CrSi, 51CrV4, 1.4310, 1.4571. Wire size range: 0.20 to 28.00 mm Special alloys such as Hastelloy, Inconel, BeCu on request. Leaf springs, metal stamping, and bending parts (spring) steel strip Thickness from 0.10 to 3.00 and width 1.5-120mm Production is according to customer specifications (drawing, sample or information)

JHM CONCEPT is specialized in engineering, design, production and installation of special purpose jigs and fixtures. OUR DEPARTMENT: 1 engineering office + 1 machining company A single contact your you with capabilities of two companies: the enginnering office JHM CONCEPT and its machining expert partner SODERTAL. For your needs, we develop, produce, adjust, qualify and deliver specific tools or parts. Our team: 6 engineers and 5 technicians are at your disposal to answer your problems. Our strengths : - Development of specific solutions - Prototyping - Machining - Cutting - Manufacturing Our philosophy: Provide French quality products at the best prices!

General machinery, mold and equipment production, Automotive, aviation and defense industry parts production, Glass fittings, facade ve construction equipments production, Food & medical machinery and equipments production, Furniture accessories and parts productions, Boutique and custom products.

Manufacturer of wire and flat springs Cutting pieces on press EtFormage cutting machine on multiple slides

The company Johann Vitz GmbH & Co. KG was founded in 1908 and produces today over 350 state of art machines to almost 10,000 sqm plant area springs, stamped and bent parts. Flexibility, innovation and high quality standards make it possible that products of our manufacture in almost all industrial sectors such as the automotive, telecommunications, mechanical engineering or Haushaltsgeräteindustie come nationally and internationally. Partner for individual solutions We find the right solution for almost any task.

We edit and customize all Arte of feathers and feather products, and bending parts.