Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities. Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

As a regional company, we, HEK Präzisionstechnik GmbH, offer small, medium and large series components in the following technical areas: • Milling: components up to 990 mm long, 700 mm wide and up to 350 mm high • Turning: Machining components up to Ø450 mm and 500 mm in length • Small module assembly • Any surface treatment, such as components with polishing • Measurement reports included (Keyence IM 8030T) What makes us a potential supplier is our delivery reliability, the quality of our products, many years of experience and, above all, the requirement for ourselves to achieve the highest possible level of customer satisfaction. On request, we have the option of storing long-range products in our company to ensure timely deliveries. Flexibility is very important to us. We would be delighted to work with you and to count you as one of our satisfied customers in the future. Have we sparked your interest? Then feel free to get in touch with us.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

Saku Metall Allhanke Tehas AS provides subcontracting services, specializing in the manufacturing of sheet metal assemblies with integrated technologies based on customers' drawings and requirements. With all key production processes handled in-house, we help manufacturers enhance supply chain efficiency by reducing delivery times and minimizing quality risks. Our in-house production processes include development, cutting, bending, welding, painting, and assembly, ensuring a seamless and reliable manufacturing experience tailored to your needs.

We bring metal into shape! Your specialist for metalworking & production of complete assemblies About us: We face many different challenges every day. Our range of services ranges from classic sheet metal processing to the production of complex components and assemblies as well as the production of individual components. Custom-made products and individual solutions round off our capabilities. Whether you are a craftsman or a bulk buyer – thanks to our versatility, we are able to meet everything according to customer requirements.

Kmetex is a family-owned company that, by investing in quality and technology, develops solutions for the future. Our company deals with the development, production and sales of machines, industrial components and automated equipment of its own brand. At the same time, we offer integrated production solutions for industry and mobility. Part of our activities also extends to the field of the auto industry and solutions related to the industry. Our goal is to develop products that guarantee safety and sustainability and at the same time follow the expectations of the client. Our guideline is to monitor the project from “development to decommissioning”, which means finding solutions that follow sustainable development.

We are a specialized manufacturing company with a focus on precise individual parts in the field of tool, machine and fixture construction, manufactured on modern 3 and 5-axis milling machines, CNC turning centers and by wire and sink EDM. In addition, we offer surface and cylindrical grinding, component assembly including functional testing and the organization of proven third-party services such as hardening or burnishing — all from a single source. Our production is based on digital processes: Whether samples or series parts based on CAD data — we take over your data sets and process them directly via our CAM software. Thanks to automated loading systems from BMO, we guarantee economical and reliable production — even with complex requirements.

Reseda d.o.o. is an innovative and modern company with a vision, rich experience, tradition and clear goals, which are related primarily to quality products and services, and the related satisfaction of our customers and partners, which are crucial for our activity and development. With our headquarters in Nova vas near Markovci, we strive to work for the benefit of the local and wider environment, so that we can be focused on the best results, and we are distinguished by many years of experience and numerous references. Our main activities include CNC metal machining, production and highly complex assembly of metal products, construction, 3D modelling and planning of production processes in the metal industry. We provide our clients fast response times, experience and high flexibility, to find the most appropriate solution for them. Our business partners and customers come from worldwide companies that are leaders in their fields and operate on a global scale. We provide our clients fast response times, experience and high flexibility, to find the most appropriate solution for them. Our business partners and customers come from worldwide companies that are leaders in their fields and operate on a global scale. We offer them fast response times, experience and high flexibility to find the most suitable solution for them.

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products. In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

Since our founding in 1969, we have stood for maximum precision and continuous growth. With our location in Elzach in the Black Forest and around 100 dedicated employees, we are your reliable partner for series production and prototypes. Our core competencies lie in the production of complex turned and milled parts, chemical deburring and modular automation technology — always with the highest quality standards and cutting-edge technology. We supply demanding customers from the medical technology, mechanical engineering, hunting and sporting weapons, sensors and optoelectronics industries — wherever precision and reliability are crucial.

We produce precision mechanical components and assemblies in small to medium batch sizes. Next is a cleanroom class ISO 5 available. CNC turned parts CNC precision parts CNC milled parts Lohndrehereie Lohnfräsereie Precision Turned Parts Precision milled parts Electropolishing Laser marking

Your specialist for welding work, pipe/plant construction and stainless steel design Since the company was founded in 2004, Montagearbeiten Senfter has been closely linked to the food and beverage industry. The originally regionally based East Tyrolean company has developed into an internationally recognized partner in plant engineering for the food, pharmaceutical and chemical industries through specialization and further development in other welding techniques. Do you have dreams in stainless steel? We have the solution! As experts in stainless steel design, we put all kinds of ideas into practice, because at Senfter, careful planning meets innovative, inspiring design perfection. Whether it's stainless steel railings, stainless steel pedestals, radiators or exhaust — functional perfection and an appealing look are sure to impress. We would be happy to tell you everything that stainless steel design can do.

We offer innovative solutions made of plastic and metal, from the precise manufacture of individual components to complex assemblies – everything from a single source, from development to series production. Our range of services includes injection moulding, machining, sheet metal working and welding technology, as well as the manufacture of tools and components. It extends from toolmaking and high-quality components to customised special vehicle construction and certified special protection systems that protect people worldwide. Customers from industry, medical technology, mechanical engineering, agricultural technology, the off-highway industry, railway technology, defence and many other sectors – including the automotive sector – rely on our experience and quality. With around 1,000 employees at seven locations in Europe and a modern machine park, we are ideally equipped for every task – and are sure to provide you with the right solution.

TURNING & MILLING experience since 1998 On our modern machinery Our experienced team manufactures your turning and Milled parts made of aluminum or plastic exactly according to your specifications. Specialized in opto-mechanical In this area, we support our customers as reliable partner with extensive manufacturing expertise. MODERN MACHINERY Automated manufacturing Our experienced machine operators (f/m/d) use modern and automated turning and Milling machines for every day, workpiece for the highest quality workpiece for our to manufacture customers. In addition to manufacturing turning and We carry out milled parts for our Customers like to organize surface finishing by suppliers and others accompanying services.

RUDA-Metall GmbH The company RUDA-Metall GmbH was founded in 1982 and has its manufacturing focus in the area of technical stampings. Here components for the automotive industry and its suppliers and the electrical industry are manufactured for years. The modernized about 2 years ago vibratory finishing system, we can achieve the best results even for your parts. The tools are designed and manufactured in our own modern tooling. In 1994, with the company K.Fr. Brahm, consisting since 1868, a group of companies founded. The K.Fr. Brahm manufactures focus: furniture fittings, hinges, stampings for light domes, scaffolding, electrical parts, office furniture and fittings for the mirror industry. In order to work more efficiently and more cost effective for your customers in the future, the K.Fr. was Brahm 1-1-2006 integrated GmbH in the company RUDA metal. Our Lord Dannhorn (Dip.Ing. Engineering FH and Dipl. Economics FH), as well as our technicians and master craftsmen to support you in the optimal and cheapest design your parts.

Your Experts for High Performance Plastics The Ensinger Group is engaged in the development, manufacture and sale of compounds, semi-finished materials, composites, technical parts and profiles made of engineering and high-performance plastics. Further development of proven production techniques, new applications and international expansion have earned this family-owned enterprise a place among the leaders in its field.

From sheet metal to the finished product Quick Dependable Holistically. We have been devoted to metal for more than 40 years. We know what it can endure and how we must treat it. We create innovative, tailor-made solutions from metal. Our business relationships are based on partnership and trust. With knowledge and experience, we help you develop your products and optimize them for production so that they meet your needs and fulfill their purpose. This enables us to use the most advanced technology to guarantee you the quality, precision, speed and reliability of product delivery.

JG AUTOMOTIVE: Developer and Supplier in the manufacture of metal parts JG Automotive was founded in 1982, dedicated to the manufacturing, development and supply of metal components for the automotive and industrial sector. Thanks to the mastery of the technologies of manufacturing of metal products specifications provided by clients, we have diversified the industrial sectors of performance and optimized our work processes. In 2002, together with 18 international partners, we created Global Alliance, a large group with 230 cooperative engineers, manufacturers in Brazil, Germany, China, India, Italy, Japan, Korea and USA, among others, managing a joint turnover of € 1,720 M. Dozens of companies in the automotive, energy, railway, agricultural, elevation, etc. sectors, are already among our customers and fortunately for us every year we continue to grow thanks to the trust of our customers and the incorporation of new ones. Our products are presented with their corresponding quality certificates (IATF / TS / ISO / CE / PPAP). In short Technology and high competitiveness in products to specifications provided by clients. TECHNOLOGIES: Forging, Casting, Machining, Stamping, Laser cut, Welding, Raw Material, Microforge, Microfusion, Fasteners, High Pressure Cylinders, Hydrogen cylinders for hydrogen filling stations, Toolings, Precision Bar Turning and Special Parts, Inserts and Profiles, Tubes SW and DW and Rod Formers, Springs, E-mobility, Precision Gears, Bearings, automotive plastic injection parts and Returnable packaging of metal parts.