Gersfelder Metallwaren GmbH has stood for innovative manufacturing solutions for over 50 years and is now one of the leading manufacturers of assembly and welded components, bent and turned parts in Germany. Gersfelder Metallwaren GmbH is based in Gersfeld in the Hessian Rhön near Fulda and, with around 250 employees, is one of the largest employers in the region.

As a system supplier for electromechanical assemblies, we manufacture plastic and metal components using hybrid technology. This means that we concentrate on the production technologies of plastic injection moulding and punching and bending of metal components. The advantage for you is that you can obtain ready-assembled assemblies of the most diverse production processes from one source. By moving Friedrich Joerg GmbH in 2016 to newly built production and office premises, we were able to create a capacitive buffer. Thanks to a high degree of automation, we can offer you particularly competitive prices. We manufacture manually in small series up to large series fully automated and pre-assemble all components for you. In short, we adapt flexibly to your requirements. We provide support as early as the product development stage in order to take into account quality, cost and tool-specific aspects in the early phase. We manufacture the necessary tools or devices in our own tool shop. This also allows us to increase our flexibility, for example in case of short-term changes. Furthermore, we also offer finishing processes such as: printing on plastic parts (cliché/pad printing), hot foil stamping for a particularly noble appearance of the products, machining and ultrasonic welding. It goes without saying that we are certified according to ISO 9001:2015 and deliver a very high and consistent quality. We would be pleased if you contact us. categories: Electromechanical assemblies; Foil hot stamping; Customised plastic mouldings; Plastic optical fibres; Optical fibre components; Optical fibre systems; Optical fibre technology; Optical fibre transmission systems; Pre-assembly Assembly of small parts for industry; Assembly of plastic components; Assembly of mechanical components; Stamp-bending parts made of stainless steel, non-ferrous metal, steel; Stamp-bending tools; Connectors; Connectors for surface mounting; Complete plug connections; Pad printing; Thermoplastic precision mouldings; Thermoplastic overmoulding with plastic; ultrasonic welding of plastics; overmoulding tools for insert parts; 3-D MID components; connecting terminals for power cables low voltage & high voltage; component assembly; die casting; mould making; housings for the electrical industry; terminals for electrical cables; plastic injection moulded parts; plastic injection moulded parts with metal insert; electrotechnical plastic parts; technical plastic parts; plastic processing; multi-component injection-moulded parts; plastic-injected metal parts; product development; prototype construction; terminal blocks; technical injection-moulded parts; thermoplastic elastomer (TPE) moulded parts; jig and fixture construction; toolmaking; two-component injection-moulded parts; Imprint: https://www.friedrich-joerg.com/kontakt/impressum/ Privacy policy: https://www.friedrich-joerg.com/kontakt/datenschutzerklaerung/

Precision meets innovation. We are your partner for high-precision CNC-manufactured individual parts and specialized special parts for aerospace, and all demanding industries. We have the latest technology and produce according to your data, drawings, samples or ideas. Team and solidarity define work that is fun and develops the full potential of commitment, creativity and enthusiasm.

Your specialist for high-quality surface finishing, assembly of complex components and CNC manufacturing in compliance with the highest quality standards. Making a difference for our customers — that is the vision of Buchert + Feil. That is why we incorporate our knowledge and experience into each of our production areas. Comprehensive and individual support before, during and after project completion, combined with timely and cost-oriented project management, create transparency and planning security. Peter Buchert and Ronny Feil, who enjoy an excellent reputation in the CNC industry, are also closely linked to the region and committed to absolute quality standards. Her customers include high-performance optics and measurement technology companies. While the fate of “Made in Eisfeld” has often been steered by international players in the past, Buchert+Feil, a company from the region is now taking over Noblex GmbH to write a new chapter in the “Quality from Thuringia” success story. Buchert + Feil combine the experience of rock-solid, proven technical processes with the advantages of the latest technologies. The company focuses entirely on digitization and optimization of production, with a focus on manufacturing, surface finishing and assembly of complex components at the Eisfeld site. BENEFITS Machining — milling, turning, grinding, eroding (molybdenum, 4th axis), HM/ceramic, gearing and subsequent quality assurance at the highest level. Surface finishing — We offer you a wide range of surface treatment processes: anodizing (including hard anodizing), burnishing, SurTec 650, gilding, painting, blasting, lasering, passivation, gilding and washing. Assembly — professional assembly of small and large components as well as mechanical, optomechanical and electromechanical components. Cleanroom parts cleaning ISO class 5 — For particularly demanding applications and sensitive parts.

• CONSTRUCTION • PRODUCTION • INSTALLATION • SERVICE • We are a family owned and powerful system provider with more than 30 years of expertise and experience. We offer design, production and manufacturing of equipment, assemblies, sheet metal parts, plastic parts and assemblies for a variety of industries and markets. Product range: Machines and equipment for X-ray technology and reprographics, medical diagnostics, medical devices, film development, photo development, IT industry, printing systems, textile processing. More product range for the general Machinery and equipment: engineering, equipment manufacturing, acquisition of outsourcing projects, assemblies, assembly, installation works of mechanical assemblies, component manufacturing, OEM products, cable assembly, stamping parts, laser machining, sheet metal, sheet metal parts, sheet metal parts, CNC sheet metal, sheet metal components, plastic parts, plastic processing, plastic welding, deep-drawn parts.

Faist Systeme GmbH, based in Untermeitingen, is part of the Faist Group with locations in Europe, North America and Asia. As a production company, we manufacture high-quality products primarily made of stainless steel at our location for commercial kitchen technology and the automotive industry, among others. Our range of services includes punching and deep-drawing, welding and assembly of components as well as surface treatment through mass finishing and electropolishing.

The family business Schüttler Technik has been active in industrial sheet metal forming and apparatus engineering for more than 40 years. With around 85 employees, we create all conceivable products for our customers - innovative, skilled, and always with the highest quality. Demands and technology in today's sheet metal forming sector are constantly changing, while quality standards continue to rise. Our entire industry is caught up in a rapid development process. Schüttler Technik is always willing to face these dynamic challenges head on, and make the most of these new technical opportunities. Since Schüttler Technik was founded, we have always relied on state-of-the-art technology. Our great willingness to innovate has paid off. Especially for our customers, who can always access a portfolio of services which always keeps up with the times.

Our company is a 68-year-old company and with its expert team and qualified product selection, we offer our customers and the companies that choose us the opportunity to work together by prioritizing quality. Our company video https://youtu.be/iOXV0C5f_v8?si=kLx2VGLXe1QAvMev

We are a family business with 90 employees. The core competencies are the production of precision mechanical components as well as complete assemblies. In addition, the manufacture of Macor glass ceramic components. We have around 35 employees in production and around 30 assembly technicians. We manufacture from single parts to large series. Simple component as well as highly complex. The cleaning of the components is standard and we have a measuring laboratory with standard VDI class 1 (+/- 0.4 ° C over 24h).

The firm Joh Treschnak was founded in 1978. She pursued from the beginning a two-pronged strategy based on metal products according to customers' drawings on the one hand and thermoplastic injection molded parts on the other. In line with the growing demands in the metal-processing area of our machinery has been steadily expanded. The Ter Steege Groep 2003 took over its long-standing Liferanten and supports the company in their current business fields in full. By moving to the new factory buildings at the site Zollhausstraße 5 in 2004, the company also equips spatially for future requirements For more info you like to see at our presentation.

Founded in 2021 as a 100% subsidiary of internationally active Planlicht GmbH and part of the “PlanlichtGroup” group of companies, we draw on over 35 years of expertise in housing and electronics manufacturing for the architectural and technical lighting sector. The highest standards in the area of sheet metal manufacturing for visible housing components determine our daily work. In order to alleviate the constantly increasing complexity across the entire supply chain, we offer, combined under one roof, a wide variety of technologies for the entire range of thin sheets, from powder coating to the assembly of complex mechanical and electrical components. Planfactory sees itself as a local solution provider for demanding partners

Versatility - through years of experience and openness to new ideas. Today MOUNTAIN METAL OHG was founded in 1980 by Mr. Alfons Berg as a sole proprietorship. In 1994 the opening of a branch factory in Oberwiehl and thus the expansion of the power spectrum in sheet metal processing. The establishment of a partnership made in 1999 by the introduction of the individual enterprise and the participation of Mr Andreas Berg, who since 1993 has been an employee of the company. Managing Partners are Alfonso and Andreas Berg. Dedicated and technically skilled staff, supported by a powerful technical equipment enable quality and on-time reliable results that meet the individual requirements of our customers. With the sum of our experience of over 30 years, creativity and flexibility, we develop optimized overall and advanced detail solutions. Robot Welding Welding Welding Robot welding welded constructions sheet metal forming sheet metal processing milling turning machining sheet metal structures large milling parts assemblies burnouts combustion engine burning operation Abkantarbeiten cut profiles industry profiles structural steel welding welding TIG MIG MAG Stud Welding Drawn Arc Capacitor discharge machining stainless steel engineering tool steel plasma cutting plasma system plasma cutting parts sheet steel processing 16Mo3 Hardox 1.4301 1.4571 1.4404

Glatec is your reliable partner for manufacturing subassemblies from metal. Glatec collaborates with companies from the electronic, machine building, home appliance and furniture industries. Glatec is one of the leading producers of fittings for beds and kitchen appliances in Europe. Our production is set up for manufacturing components and subassemblies in order quantities from 5000 to 500’000 articles. This allows us to react promptly and flexibly to your requirements. We focus on processing sheet metal, varying in thickness from 1 to 5 mm, coils up to 400 mm wide. We operate three automatic feed presses with a pressure range from 630 to 2500 kN. For separate operations, presses varying from 100 to 2500 kN in force are available. Stamping, bending and progressive dies are designed and produced in our own tool making shop. We also produce our automation solutions inhouse. For quality assurance 3D measuring equipment is available in-house. All CNC controls are linked into the company network. Programming of the machines is done with NX CAM Express.

Surfaces with system The Matthias Wetzel Industriebeschriftungen GmbH stands for the treatment, processing and labeling of surfaces. She has mastered technologies such as laser marking, engraving and mechanical parts, screen and pad printing, powder coating and painting as well as precision finishing, drag finishing and processing. Both the printing of round surfaces especially of optical components and surfaces of tools, trim panels, front panels, labels, watches trays, implants, scales, mechanical parts and complete assemblies can be coated and grafted. We are certified according to DIN EN ISO 9001, DIN EN ISO 14001 and OHSAS 18001 for laser-etched labels we are CSA approved supplier for the North American market.

Plastic is our passion. Design our strength. In line with our guiding principle "Innovation in Plastics", we have been developing clever plastic solutions for the individual needs of our customers for decades. The high-quality plastic applications are produced exclusively by experts in our factory in Switzerland. 100% Swiss quality and genuine craftsmanship. No production line work. Reliability and timely delivery are very important to us. Cellwar is an owner-managed company. Benedikt Zenhäusern, Chairman of the Executive Board and Christian Poffet, Member of the Executive Board work day by day with more than 30 highly qualified and motivated employees on new ideas and solutions in processing technology. In order to get qualified junior staff, we directly train our own apprentices.

Teamwork between you and us is the cornerstone of successful cooperation Are you looking for a system supplier? Talk to us when it comes to manufacturing and assembling mechanical components. Prototype construction, gauges, equipment and devices, we are also used to this precise work and can shine with the highest quality and short delivery times. If you need individual parts or small series again in the near future and are looking for a reliable system supplier for manufacturing parts, you should think of EL4TECH Fertigungstechnik GmbH. We manufacture materials such as aluminum, steel, stainless steel and plastic. For more details, please see our simplified homepage: www.el4tech.de We would be happy to discuss processing sizes for your specific request with you personally.

AKRON means by "Subcontracting" a complete service, including consulting and co-operation with the customer. This is the reason why we put our pluriannual experience in plastic moulding at our customers' disposal, which means that we do not offer the mere plastic molding, but much more, i.e.: we suggest you the most proper type of material for your specifical needs; we analyse your product for you, in order to find the best material and solution to improve it and to get it cheaper; we design and manufacture the necessary equipment and molds; we mold, assemble and pack every possible plastic part, even with metal inserts; as many plastic components after the molding have to be wired, we cut to length, seam and insert the required cables. Thanks to our plant in Bacau-Romania, with more than 100 people, we can offer very cheap and highly reliable assembling works. In 2017 we bought the company Telcavi S.r.l., and produce now also a wide range of circular connectors for industrial applications: M8, M12, panel mount connectors, distribution box, valve connectors DIN 43650.

Brewhouse develops and manufactures complex, close-tolerance stamping and bending parts for their own assemblies. Fixed partners in close proximity produce these parts SUDHAUS tools. Are used: Ribbons, wire and sections of steel, brass, bronze and chrome-nickel steel. The SUDHAUS tool and equipment meets all Requirements for the efficient production of various tools and equipment. High quality plastic and versatile manufacturing techniques provide the user with countless alternatives. In product development and design of the imagination are almost no limits. SUDHAUS has acquired a special know-how of the painting, the highest demands erfüllt.Teile the so-called Tag-/Nacht-Design not only found in the vehicle industries. The use of modern technology enables individual labeling of parts.

Well-known customers worldwide rely on the high quality and best standards of Haslach group. From the company's history out Haslach has a deep understanding and knowledge of the materials used. This extensive experience is rooted in the minds of our more than 200 employees - and we are proud of it! For a successful company are good employees, each and everyone is looking for a specialist in the field. So it creates the Haslach group regularly to set new standards in sheet metal, steel, stainless steel / aluminum and composite materials technology. Company founder Helmut Haslach makes now with his 30 years of experience as general manager for strategic decisions in the company. Since 1999, supported by his daughter Marita Haslach-Then. A second generation graduate economist for Commercial Affairs With over management in 2005, she is responsible for staff development, purchasing, organization and investment. A year later, Jürgen was then appointed as the third manager who drives forward the innovative, highly complex designs. The Haslach group has for many years from their own apprentices. We are a qualified training company, and an intensive youth development is very important to us.