ČZ a.s. Division Al Foundry is a part of the ČZ a.s. holding, which was founded in 1914 and has now 5 different divisions (Al Foundry, Iron Foundry, Tool Shop, Turbo, Auto) and three LLCs - ČZ Chains, ČZ Machine Plant, ČZ Gastro). Due to the long-term tradition, the Al foundry production was subsequently serving for different sectors of the automotive industry, as an example the production of castings for engine parts or its components. At the present time, the Division Al Foundry has 200 highly qualified employees with a long-term work practice using 6000 m2 of production area. Al Foundry is a holder of the quality system according to the ISO/ TS 16949 and 14001:2004, further on is certified within the Secure Company system. Supported alloys: EN AC 46 000 - DIN 226 EN AC 47 100 - DIN 231 Casting are being produced in a range of 0,1 - 8 kg Die-casting machines: 1 x CLH 160 t 2 x CLH 250 t 4 x CLH 400 t 1 x DAK 500 S FRECH 6 x CLH 630 t – 1x fully automatic incl. trimming, 1x half-automatic (spray robot) 1 x DAK 880 FRECH – fully automatic including trimming 1 x CLOO 1600 t – fully automatic including trimming Die-casting machines are made by: Frech, Hydac, DEL, Snina Trimming presses: Range 10t – 30 t SOL 10, SOL 26, CNOS 16, LHS 15B, ČZ 10 Capacity possibilities: CLOO 1600 - 533 t/yr Frech DAK 880 - 260 t/yr CLH 630 - 1482 t/yr Frech DAK 500 - 282 t/yr CLH 400 - 947 t/yr CLH 250 - 212 t/yr CLH 160 - 40 t/yr Melting house equipment: Gas-melting furnace STRIKO – two – chamber, volume 2.000kg, Electric resistance furnace ELSKLO – output 180kg/hr, volume 600kg, Low-frequency resistance furnace Siemens – output 250kg/hr, volume 1.000kg, Degassing equipment ammonia-based. Finishing technology: Basic machining: 2 x screw-cutting 2 x drill presses Finishing drum washer tumbling – tumblingequipment Rössler blasting – suspension blast machine SPH Disa and a drum blast machine PTB Disa

Strong all-around - SLM 360º We develop and manufacture complex aluminium die-cast solutions for the automobile industry and its system suppliers. As a Group, our strengths lie in the development of tools, products and processes as well as in our high level of flexibility and ability to take action quickly to implement solutions for our customers. We want to expand our business activities to increase flexibility, transformation time and cost-effectiveness in the provision of light metal components for our customers. Therefore, we are expanding our capacity for order-related assembling. From company to group The original and main activity of the owner-run Group is the manufacturing of aluminium die-cast products for the automotive and component supply industry. Created in 1989, the aluminium die-casting foundry originally made unfinished parts for the European automotive industry. Today as a Group, we are a competent partner to our worldwide customers for the entire process, from product development to the delivery of complex, ready-to-install light metal components. The right approach Our aim is to obtain full customer satisfaction and to build a business relationship designed to develop into a long-term partnership. It therefore goes without saying that we deliver products of the desired quality, in the agreed amount and at the required date. Our references are proof of the level of confidence we have established over the past years with our customers. The principle of error prevention always comes first in regards to quality measures and our quality objective is “zero defects”. Our numerous certifications are proof of our commitment.

Producer of aluminium window and door furniture.

• Pump Manufacturer • Transmission and valves manufacturer • Metrology • Medical equipment • Injection Molding • Special machine • Sawing Technology

Centrifugal casting Tubes in Steel and Stainless Steel

We specialized in aluminum Kippgießteile their specialized piece weights in the range of approximately 10 g are up to 100 kg. The large volume Kippgießteile with dimensions up to 1.5 m in length are manufactured in Germany. The wage-intensive products are manufactured at competitive prices in our new plant in Hungary. A variety of products we supply finished in all common remelting and hut alloys. For years we have been supplying reputable clients in the areas of the vehicle, drive line, machine and plant construction. Likewise, we manufacture manufacturer of electric motors, awnings, exterior lighting and industrial scales. This is mostly to various gear housing or drive housing and motor flanges, cover and cylinder with high technical requirements. The unit weights of these products are in the range of about 1 to 100 empty kg, we have specialized in large-volume Kippgießteile. A variety of products we supply finished in all common remelting and metallurgical alloys.Cast parts are eg. Base frame, housing, brackets, base, magnetic enclosure, equipment rack. Our special services: 1 Construction services as early coordination with our partners to achieve a technically and economically favorable solution for the casting and the casting die. 2 Foundry Technical consulting for the development of new castings on initial samples to mass production. Advising on necessary technical changes to the article. 3 Electronic monitoring and control of casting machines to ensure that our clients want quality. 4 Delivery of castings and heat treated if necessary and machined Aluminum alloys The melt is continuously monitored with existing spectrum analyzer (Spectrometer). Molded be the most common alloys, both in remelting and in cabin quality. The following alloys are in use in our: Alloy designation to DIN EN 1706 numerically chemical symbols EN AC-21100 - EN AC-Al Cu4Ti EN AC-42100 - EN AC-Al Si7Mg0, 3 EN AC-43300 - EN AC-Al Si9Mg EN AC-44000 - EN AC-Al Si11 EN AC-44200 - EN AC-Al Si12 EN AC-46200 - EN AC-AlSi8Cu3 EN AC-47000 - EN AC-Al Si12 (Cu)

The predecessor of FÉMALK (Fémöntészeti és Alkatrészgyártó) Zrt. was founded in 1993 by Hungarian private individuals. Since then it has become one of the largest privately owned aluminum pressure foundries in Hungary. Its turnover exceeded 20 million Euro in 2006, and it employs 225 people. The main profile of the company is pressure die casting, and it also does several other task and work phases (product and tool design, modeling, tool production; machining, surface treatment and assembly of castings). The company exports almost all of its products. It provides mainly German, Swedish and Austrian suppliers of the automotive industry with castings.

In more than 50 years came from a small family, a modern company. Our work is based on the latest technology in production, a customer-oriented organization and expertise in all areas of Al and Zn die-casting, as well as the Al-Kokillengusses. Customer satisfaction, short distances, quality, experience, flexibility, environmental awareness and innovation. This will make us a lot of customers to a major supplier for castings of aluminum and zinc. We help you in achieving your claims in the shortest possible time and in top quality. We have specialized in casting products in small and medium series. We assume not only casting production, but also the mechanical machining, surface treatment, assembly and logistics of pre-finished parts. A high degree of punctuality in through a personal contact person is the foundation of a successful partnership for us.

Casting materials: Cast iron with lamellar graphite Cast iron with spheroidal graphite in all classes Main products: Medium and large series Unit weights from 0.5 to 600 kg coreless and core intensive

MOD-GUSS is specialized in delivering parts for machines and installations used in such industrial sectors as chemical industry, oil industry, paper industry, machine industry and agriculture. Our twenty year experience in foundry business let us become acquainted with the best technological solutions for various kinds of parts for machines and installations.

h1> Business /h1> We are a development partner and manufacturer of cast products of light metal for the automobile industry. The economic strength of our company is to be the basis for expanding our market presence and to enhance our Innovation and competitiveness. As a growing international group of companies, we strive for the highest Customer satisfaction through value-oriented service and partnership with our customers and supplier partners. Our company-wide quality-lived, environmental and work-safety-oriented Management System strongly supports the fulfillment of our corporate responsibilities. Raw materials, energy and water we use to conserve resources sparingly. We continually improve the environmental impact of our production processes and workflows with the aim to reduce the waste and emissions. Each employee ensures the Compliance with applicable legal obligations for our company. Motivated and qualified employees are the foundation of our success and the driving force for continuous improvement of our processes. Information and training are prerequisites for economic and quality-and environment-conscious thinking and action. In our society, social and environmental responsibility, we are righteous, we have a world of work create, to which our employees can be proud of and that allowed them to personal development.

Rubitech Alucast is part of Rubitech Group, whose authentic, innovative and results-oriented corporate culture provides a solid basis. For more than 27 years Rubitech is active on the international market for aluminum high pressure die casting. Thanks our unparalleled experience in the areas of production processes, Supplier management, design and development, technical requirements, Innovation and product development, we offer our customers products and Services with which they can be distinguished from other market participants. Rubitech world The Rubitech Group has subsidiaries in the Netherlands, Great Britain, Malaysia and Romania. Our head office is in Steenwijk in the Netherlands together with our sales office in the UK is responsible for sales, Customer service and R & D. Our employees in Malaysia and Rumänian are for the Responsible local production, quality and logistics process. Sales and marketing business units Our sales unit Rubitech Alucast develops and supplies since 1983 Aluminum die-casting products.Thanks guarantee our supply chain management We offer our clients individual product solutions throughout the supply chain. Rubitech Heating was founded and developed in 2005 and produced Condensing heat exchanger for residential and commercial use. Rubitech Great Britain and Romania are Rubitech for sales, warehousing and Customer service in Britain and Central Europe responsible. Operational business units Monitor the production companies Rubitech Malaysia and Rubitech Romania and coordinate the flow and production in the relevant appendices. Both companies are responsible for production and quality assurance; also accepts our Romanian subsidiary sales and customer service for our Central European customers. Certificates available on request.

MESIT foundry, a.s., is a dynamically developing company with more than 60 years old tradition in aluminium alloys investment casting. We can offer in the house performed testing of mechanical properties, penetrant testing, radiscopy and radiography and 3D measuring. According to customer wish, casting could be machined in our machine shop.

For over 100 years, quality castings are produced in the iron foundry Brackelsberg. A high degree of flexibility, a profound experience and constant innovative thinking and action, our company has been able to adapt to ever-changing economic conditions over this long period. Our strength lies in our specialization in small and medium series 0.05 - 100 kg piece weights, which are made competently by qualified personnel and high-quality materials. We are your reliable partner in the field of gray and ductile iron and malleable.

Modern and future-oriented The traditional company Hiby Since the middle of the century 19.ten we set standards in terms of quality and durability. With the will to innovate and the steady response to new markets, we are also now one of the sought-after and well-known companies. With continuous expansion of its core businesses, we act as Hiby group in fusion with the ELAFLEX as an ultra-modern manufacturing company in the field of SAND CASTING for aluminum castings, gunmetal and Pipe Fittings, as well as for the installation of assembly modules on national and international markets. We are characterized by a high degree of vertical integration, including machining and assembly. Our customers come from all areas of the vehicle, machine and plant construction, from the electrical, installation and environmental engineering. All tools are designed and manufactured in our own tool model and fixture. This resource and our know-how we offer as a service.

We are specialist in the field of production of small and large series of core-intensive and heavy-duty castings. We have a modern electric smelting plant with a 4-ton medium frequency and two 10 ton power frequency induction furnace, which will guarantee us a total capacity of approximately 15,000 tons per year. The products are in the mass range of 100-15.000 kg unit weight in the material qualities: EN-GJL-200 EN-GJL-250 EN-GJL-300 alloy cast iron (Ni, Cr) for heat resisting castings and nodular cast iron of the qualities EN-GJS-350-22LT EN-GJS-400-18LT EN-GJS-500-7 EN-GJS-600-3 EN-GJS-700-2 Our main clients are from the fields of wind power generation, motor, machine tool industry, gear manufacturing, pump and Verdichtungsbau, turbine construction and general engineering.

lost wax precision foundry specialised in technical parts for demanding industries. Small to large batches. 30 grammes to 30 kilo. Parts in any kind of steel, from carbone steel to stainless steel and super alloys. Full service including heat and surface treatment and machining. All kind of inspection upon request: dimension, metallurgical, X ray, ... Strongly involved in medical prosthesis, including grinding and polishing.

At a glance Manufacturing technology Form of castings made of cast iron with nodular graphite, vermicular and flake graphite, SiMo-alloy cast iron and austenitic grades of cast iron Complexes, core-intensive castings primarily for the automotive industry Production Program - Exhaust manifold, turbocharger housing, supporting brackets, spring support - Series from 10,000 units / year with a unit weight of 2-10 kg Key economic data - Turnover: € 70 million - Shipping quantity: about 16,500 t - Employees: 290

Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

Our core competencies are: Tools - Hard Metal Processing - Sheet metal rounds - Punching / pressing (tool Falling) - Punching-bending (Bihler machine) - Stamping - Injection molding, extruding - injection molding - Encapsulation of inserts - To water - Die-casting - Ingot - Machine molding (sand casting) Translation by Google Translate