Keurhorst Metalworking was founded in 2015 by Michiel Keurhorst, an experienced metalworker, who has mastered the profession from practice after years of experience in the world of machining. As a company, we mainly focus on complex 3D milling, but whether it is workpieces of Steel, stainless steel, aluminum, titanium or plastic, we always aim for the best results and are satisfied with nothing less. Furthermore, we are pre-eminently the address when it comes to high-end fine mechanical parts for, among other things, injection molds. In order to achieve this, we have access to a beautiful Hermle milling machine, and a Bridgeport. Furthermore, we naturally work with the best (measuring) tools, in a fully air-conditioned workshop. In addition, we can sometimes offer something extra with our Radial drilling machine, and a 3D printer. We are a young and dynamic company that does not shy away from challenges and where perfection is of paramount importance. Need something that requires high accuracy? Look no further .. and work with Keurhorst Metalworking.

The company Basement mold manufacturing is a high quality operation, tool and supply company, we characterized the precision, reliability, and low cost manufacturing from. Reliability and speed extra special in the wire and sinker EDM but also "NEW" in CNC 2-3D / to 5Achsensimultan milling are our strengths. We are a top supplier for renowned customers. Injection molds, stamping and bending tools and their spare parts, precision parts As well as our own developed product: Clamping systems for wire EDM machines possible with very good Oualität, individual designs, affordable clamping systems for your needs.

We are a small, medium-sized family business in the 2nd generation, which specializes in aluminum permanent mold casting. We also offer machining, surface and heat treatment of the cast parts. We have been supplying our customers both nationally and internationally with high quality and on-time delivery for over 50 years

Highest technical standards The injection molding plant was established with the aim of providing customers with plastic products or products containing plastic parts that have a long run and reliably contribute to the ongoing improvement of quality of life through the continuous development of our expertise. Machine park development We are continuously upgrading our machinery to provide the technical background for our customers’ needs. Customer oriented production We strive to maintain customer-oriented production through continuous improvement. Training of our employees We pay constant attention to the training of our employees.

We are a family company established in 1993. We manufacture the following: machinery and equipment, molds, zigs, metal construction, CAD-CAM, moulds for injection molding, investment casting, 5- axis milling (aluminium and steel) and welding (steel constructions and stainless steel) Since 2003, we are also engaged in manufacturing sports gear especially for the Ski-industry . Today our company has over 27 specialized, highly experienced technicians.

We are a young, modern company in the CNC contract manufacturing sector. Our quality standards as well as our adherence to deadlines are the top priority of our company. This is the only way we can identify with every product and every service. That is why we have set up this homepage for you so that we can inform you even better about our services. The service-oriented customer care is an essential cornerstone of our successful corporate strategy. Fulfilling your wishes is our focus. Qualified employees provide friendly and expert advice. Our extensive range of services leaves nothing to be desired. Convince yourself of our range of services and our diverse range of services in the field of CNC contract manufacturing. Our products are characterized by the highest quality and the most modern manufacturing technology. Of course we offer you all this at a fair price. Every employee has special knowledge and many years of professional experience in the field of CNC contract manufacturing. These are reflected in our products. You as a customer benefit from this, now and in the future!

Ladies and Gentlemen’s, We are a Polish producer of mechanical parts. We employ qualified engineers for the production processes and quality control. Production processes are prepared on the based of an insightful analysis of customer requirements, and own production capacity. The price offer is also a guarantee for the customer, receives a product that complies with the requirements of quality and strictly within the agreed delivery period. We produce and delivery: 1. CNC turning of metal parts with a maximum diameter of 250 mm and a length of 400 mm. - the accuracy of turning +/- 0,005mm (IT5-IT6) - obtained surface quality to Ra0,63 / Rz4 - machined materials: Stainless steel, black steel, aluminum alloys, copper alloys, plastics; 2. CNC 4-axis milling of metal parts with maximum dimensions 750x500x500 mm. -precision of milling +/- 0.01 mm (IT6)? -the resulting surface quality to Ra0,8 / Rz6,3 - machined materials: Stainless steel, black steel, aluminium alloys, copper alloys, plastics 3. We cooperate with carefully selected service providers for the following areas: - laser cutting of sheet metal - thickness up to 20mm - plasma cutting sheet metal - thickness up to 100 mm - sheet metal bending on press brakes - MIG, MAG and TIG welding - other processes related to the machining of sheet metal and welded machine parts (shot blasting, powder coating) We provide production of parts strictly according to customer requirements, by working on our own quality assurance system based on the requirements of our customers from Switzerland and Germany, consisting in: - preparation of production including a detailed analysis of the customer's requirements - careful control of acceptance materials and semi-products - systematic inspections during production and immediately corrective actions - specific selection process for material suppliers and subcontractors of additional services - careful protection of goods during delivery to the customer Best regards Eng. Karol Miaskiewicz CEO Tech-Project Tel. +48 609 425 898 Email K.Miaskiewicz@tech-project.eu

Leading Italian company in the field of design and manufacturing of injection moulds as well as development of process solutions for the automotive sector. Our specialization is in the field of complex 1K moulds as well as multicomponent injection moulds with different technologies (core back system, rotational tools, index tools, vertical rotation, transfer tools - pick and place - and coreside lateral shift). With our 2K and 3K injection moulds we can also supply auxiliary injection units for the production of multicomponent parts by using a conventional 1K injection machine. Our injection moulds are applied both in the interior as well as in the exterior of the car. Our product portfolio is completed with the supply of a diverse range of industrial automations, such as end-of-arm grippers, machines for sprue cutting, cartesian robots, equipment for quality control, pressure check and assembly, robotized cells, equipment for film wrapping, gauges, laser cutting stations and others. Our purpose is to be a system supplier for turn-key solutions to our customers.

Since 1972 specialist in injection moulding of high precision plastic technical parts Starting from a little workshop, Rosà Plast is today a solid family company at the second generation, specialized in injection moulding, ready for the future challenges and to assure high precision and reliability in the production of plastic parts. Rosà Plast is located in North-East of Italy , 80 km from Venice area. 42 injection moulding machines of best trademarks, controlled by a full computerized production process and a systematic quality control assured by ISO 9001:2015 and UL QMMY2 certifications of third party. Rosà Plast supports the customer from initial phases of project and co-design , gets the most efficient solution starting from specific requests and solves problems related to existing tools thanks to a individual analysis .

We specialize in the manufacture of complex components of the tooling and engineering, typically in the lot size "one" and even small lots & prototypes. We are equipped with machinery that covers the entire process chain of such components. From the pre-and soft processing, about the hardships in the area of the tool and machine typical types of steel, extends to the finish in air-conditioned rooms, our machinery. Machining Centers / Drilling / milling from DMG / DMU and Hermle, Roeder HSC milling, turning / lathe Mori Seiki and Okuma, grinders grinding / Jig Grinding by Hauser, Kellenberger, and the young and the EDM / DEM Wire EDM / EDM SEM from AgieCharmilles and OPS / Ingersoll are installed by us. With 170 machine operators and 120 machines we make about 450,000 per year production hours. We manufacture plates, frames, stamp guide plates, molded frames, moldings, 3D-shaped parts, guide plates, stripper, stripper plates and precision parts such as stamps, molds up to a size of 2000 x 1700, 3D parts up to 1700 x 1400, turned parts up to diameter 650 x 1000 In-house hardening, coatings (PVD, TiN, TiCN, CrN, WCC) in cooperation. The materials we specialize in tool steels, high alloy steels (1.2379, 1.2343 ESR, 1.2344, 1.2311, 1.2312, 1.3343, Divar) powder metallurgy steels, PM steels (CPM, ASP, Vanadis VAN, REX, Hotvar) as well as hard metal carbide ( G10, G20, G30, K10, K20, K40, H40S).

We are a small family manufacturing company that has specialized in the realization of any claims or demands of our clients in the field of mechanical engineering. Our core business is Cnc milling and we can offer you milling range up to 1250x600x650.(5 machines) Production site is located in Samobor, CROATIA near capital Zagreb,2 km form highways A1,A3,A4. Offer: -Milling -Form milling -Engraver milling -Spark erosion wire cutting -Spark erosion and Etching -Injection moulding -Stamped and sheet metal formed parts

MAGXYARMET is a well-known European supplier of ready-machined castings, which find their application in various engineering branches. The company has been producing high value alloy steel products since its foundation in 1981 and is nowadays the leading Hungarian investment foundry. During the past decades the technology has been steadily improved and automated, the castings and components are produced mainly in small and medium sized series. MAGYARMET unites the accurate lost wax technology with a wide variety of materials: low-alloy steels, high-alloy steels (corrosion- and heat-resistant, dupley), war-resistant alloys, Nicke- and Cobalt-based alloys, bronze. Our technology enables the production of castings weighing between 0,050 and 45 kg. The products of MAGYARMET are used in pumps and valves, instrumentation, food stuff processing, general and chemical engineering, petrochemistry, filtration and packaging equipment, automotive industry and other vehicles, medical equipments, big engine production, process and general engineering, construction etc.The bigger part of our products, approximately 75%, is exported to Germany, Switzerland, Great Britain, Austria, Spain, France, Finland, Denmark, Sweden, Italy and the Netherlands. The continuous development and the aim to satisfy the demands of various markets led MAGYARMET to start rapid prototyping. This technology joins together the high-tech laser printing technology and the exceptional development of MAGYARMET during several decades in precision investment casting. Rapid prototyping based on 3D printing makes it possible for customers to get the required part machined and ready-to-assemble within two weeks. MAGYARMET offers full service and ready-to-assemble parts. Our machining shop currently has more than 20 CNC turning and milling machines, NC controlled key-seating machine and other conventional machines at service. For further information, please, visit our website: www.magyarmet.com

Lohmann Werkzeugbau GmbH & Co. KG is a future-oriented, medium-sized company and was founded in 1991. With over 20 years of experience, we have extensive know-how in the technology of tool and mold making. Our focus is on plastic injection molding, hydroforming, cutting, and prototype construction. Our extensive and state-of-the-art technology and machine park enables our team of over 20 employees to solve tasks quickly and in the best quality. We have been known for this since the company was founded. Our customers are located in the automotive, food, packaging and general consumer goods industries, among others

TREVISOSTAMPI is a mechanical workshop of about ten employees who designs, builds and tests injection molds particularly in the automotive sector. In addition to the usual mold construction activity, TREVISOSTAMPI is always more offering mechanical milling / drilling processes of steel, aluminum and cast iron too.

SCAMM Srl and MOLLIS srl supply service and equipment for metal sheet deformation and assembling. MOLLIS produce parts and assembled component made in metal sheet. SCAMM supply dies, hydraulic press and complete process line for metal sheet deformation

High tech injection molding tool manufacturer 4 to 60 tons of tools

Product Development / Construction Area Plastics Components / Assemblies / Medical / Vehicle / Building Technology Construction and construction of small series - and prototypes tools / jigs / gauges Patterning / production of thermoplastic components / injection molding Research and development on shape - memory drives / switching elements / sensors

POLIFORM started in 1979 as a private, family operated mould-making workshop. In 1990 it evolved into a private enterprise assuming the new name of POLIFORM d.o.o. (Limited Liability Company). - Located in Valjevo, company's private property consists of 1500 m² of production and administrative facilities.It includes a mechanical metal cutting workshop and a thermoplastics processing workshop. - Our basic activity is the production of moulds for the injection of plastic mass under pressure. We produce moulds according to the sample, our own documents or the buyer's documents. - We have produced over 400 moulds so far. Maximum dimensions of the mould which we can produce are 1000X800x800 mm. According to our technological possibilities, we produce spare parts and assemblies based on the buyer's documents and the parts for special purposes We own machines for the injection of plastic mass with the capacity from 60 to 1600 gr. - We use the tools of our own construction and workmanship. The annual capacity of the plant for the processing of plastic mass is about 120.000 kg.

Our primary scope is serial production of metal parts on cmc milling centers ,development and production of machine tools. Our beginnings date back to 2002 when we started to manufacture components for the tool and engineering industry. According to the needs of the market we soon expanded to include the manufacture of complete tools. In early 2009, we have decided to extend the activity to the development and assembly of the hardware, electrical and other industries in order to able to offer our customers the entire process from the idea to series production of components. Quality of our products is provided in accordance with ISO 9001:2008 What We Offer: serial cnc milling: 3,4 and 5 axis machining on high productive CNC centers. Machining materials are inox , tool steel , aluminium... Toolmaking: We are able to make tools up to the dimensions of 1500×800 mm and weight up to 2000 kg. Design and development: We design tools or machines, as well as produce final and intermediate products, based on the requirements expressed and with the help of CAD technology. Processing of metals: On the CNC machines we can process separate metal parts and series. Semi-finished products: We are able to produce various semi-products from steel, aluminium alloy or plastic.