Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

The company Brero Engineering Srl was established to meet the needs of worldwide customers in the Tochterfimen Brembomatic Srl and Brembotecnica Srl. Thanks to the support of an experienced engineering team, we are able to handle many machining processes as the prime contractor. In addition, thanks to the mutual trust and the solid partnership succeeds Brero competitive to be (in terms of quality, service and price). The company can deliver in every area of complex technologies with the support and cooperation of competent companies.

Aluminium foundry All major aluminum casting alloys Chill casting in gravity and tilt casting Sand casting HWS molding machine molding box size 850 x 650 x 250/250 mm Heat Treatment Steel shot blasting Vibratory Grinding Machining: milling to 5-axis machines and turning

Since 2010, our company has been working as a contractor and supplier of special machinery and equipment on the market. At the beginning of our activity we were mainly occupied with the assembly of machinery and equipment, but over time it became necessary to acquire machines for the precise machining of elements. At present we can provide complex services in the field of mechanical engineering - from design to execution to final assembly. Our strengths are experienced engineers and adequate technological assistance. Price competitiveness, short execution times and high quality of the offered services and goods are our priority.

Dear Ladies and Gentlemen, we are a family business operating in the metal processing for fifty years. Our company works with twelve employees mainly on CNC machines, ranging from small to medium quantities (up to number 10000). Our customer base consists mainly of large and medium-employed industrial companies. Our strength is the high flexibility, which is in short delivery times and a good value for money. A simple structure with qualified employees form the basis for this. In the range of rotation are six CNC machines with driven tools and sub-spindles available. Work of the rod are possible in diameter from 2-75mm, edits in the feed may be 650mmausgeführt up to diameter 350 x. We also have a Mazak Integrex 300 IV S multitask machine, so that we are able to high-precision workpieces of 6 Pages to machine in one clamping. Main passage, and counter spindle 77mm. Turning diameter max. 760mm x 1000mm in length. In the milling area 13 CNC machines are six of machining centers in the area to 1200x650x600mm available. Weitehin two Mazak VTC BAZ 300 with the CII processing mass X 1744, Y 760, Z 660 mm. The work area is divided for pendulum machining. For quality assurance, we are two CNC 3-D measuring machines, a 2-D height gauge and a NC-meter contours are available. Our machinery is supplemented by a variety of conventional machines for turning, milling, drilling, tapping and grinding. Also, assembly and surface treatments and hardening processes are part of our range of services.

our mechanical processing is aimed at all industrial sectors. In addition to the AUTOMOTIVE sector in which we have been operating since 1997, the main and historic customers belong to the following sectors: FOOD - BOATING - CYCLING - AUTOMATION AND HOME AUTOMATION - RAILWAY - TEXTILE - GEARMOTOR INDUSTRY Our large machine inventory and treatment partners allow us to satisfy any request. At our plant we are able to perform: TURNING, MILLING, TOOTHING, SLOTTING, AUTOMATIC RIVETING, TUMBLING. We can also guarantee PRECISION GRINDING, HEAT AND GALVANIC TREATMENTS, THERMAL DEBURRING, DYNAMIC BALANCING. Machining from 1 to 90 mm bar (all machines are equipped with bar loader); Shooting up to 300 mm with automatic loading and unloading with robot; In addition, all the machines have a double spindle, at least 2 or 3 turrets, all with Y axis and with motorized tools;

Machining of individual/small-serie precision machine parts. Production of A/C Tooling, Engine Tooling and GSE Heat-Treatment . Quality Control and Material Testing Designing and manufacturing of Purpose-built Machinery, Production/Assembly Lines. Repair and renewal of Machine Units/Parts. Measuring Calibration of measuring devices and torque wrenches

Gera Makina is a Turkey-based manufacturer specialized in large-scale welded and machined metal parts for the machinery, construction, and energy industries. With over 5,000 m² of production space, we offer CNC milling (up to 10,000 mm), heavy welding, surface treatment, painting, and CMM inspection. Our manufacturing capabilities include 7 bridge-type CNC machines (3+2 axis), welding stations with manipulators, powder coating and wet painting booths, as well as sandblasting and laser welding systems. We also operate a new 2,000 m² advanced sheet metal facility (VISION), equipped with a fully automated LVD PX-1530 turret punch, high-precision LVD Easy-Form press brakes, and a robotic powder coating line. This facility allows for 24/7 high-volume punching, bending, and finishing operations. Gera is certified to ISO 9001:2015, EN ISO 3834-2, and EN 1090 EXC3 standards and provides full measurement reports. We serve global OEMs with high-precision components, custom-built assemblies, and turnkey manufacturing services.

We manufacture installation or storage-finished machine parts according to drawings or samples from all machinable materials. Furthermore, we produce almost any type of gears, milled, or ground encountered. The respective wheel center can be delivered or made by us. Due to our high manufacturing depth which the complete mechanical processing (such as turning, milling, grinding, eroding, clear) covering, a fast and inexpensive for you to order processing is guaranteed. Quality, on time delivery and customer satisfaction are important cornerstones of our corporate policy. All the work we carry out in accordance with DIN EN ISO 9001. One of our strengths is the fastest Production of repair parts, which is ensured by a high flexibility of our employees.

Two traditional companies have become one strong entity: Wöhrle GmbH & Co. KG and Oskar Rüegg AG have been among the leading specialists in stamped, pressed, drawn, and bent parts as well as sophisticated assemblies for over 100 years. Since 2025, we have been operating jointly as the international Woregg Group—with a new brand and a clear profile. Our brand values: Cohesion · Foresight · Determination What we offer Stamped and bent parts as well as complex assemblies – from product and process development to series production Development partner on equal terms: DFM/DFX, value analysis, series production start-up support Prototypes & small series in our in-house prototype construction for fast pre-series testing In-house toolmaking: block cutting, progressive and transfer tools Machinery & materials Press capacity: 8–2,000 t Material thicknesses: 0.1–8.0 mm Strip widths: up to 1,300 mm Materials: steel, carbon steels, aluminum, stainless steel, and non-ferrous metals Downstream processes Surface grinding, hardening, vibratory grinding, brushing, surface coatings, and special packaging solutions—everything from a single source for quality, delivery reliability, and competitive costs. Locations Wildberg and Krautheim/Jagst (Germany) · Šurany (Slovakia) · Jona (Switzerland) · Stara Zagora (Bulgaria) · Querétaro (Mexico)

The quality requirements for products in consumer and investment goods sector continue to rise. That means more durability, longer service life and optimized finish for parts, assemblies and components. And so exactly the right job for H + K. Because with over 30 years experience and full-service solutions in all the hardening process, we offer the best quality and most economical solution for each batch. The H + K product portfolio includes the method hardening, vacuum hardening, gas nitriding, salt bath, carbonitriding and tempering as well as galvanic surface treatments. Modern systems, innovative process technologies and skilled staff guarantee that the increasing quality requirements are met on time and every day.

As a reliable series supplier of turning, milling and grinding parts we have established our company on the market and in different industries. Our customers are continuously rating us as A-supplier. Our services besides turning, milling and grinding include surface refinement, hardening and many more services. Beyond this we can also offer the production of assembly groups. Our experiences in assembly processes are outstanding. To assure the quality of our processes we have established a quality management system according to DIN EN ISO 9001:2008, we are using excellent measurement and testing equipment and employing a highly motivated and competent staff. Furthermore we solely use turn and mill centers from the market leader Index.

flexible, high-quality production of single parts, assemblies and prototypes to customer specifications

The company specialized at precise machining small and medium parts.

Binder Automation is a modern mechanical engineering company with 30 years of experience. Our field of activity is the development and manufacture of customer-specific special machines. Our individual complete solutions cover all relevant fields of activity of your project. From planning, design, manufacture and programming to service and maintenance by Manufacturing facilities: Our service areas are in areas such as - assembly and machining - Transfer and handling - Check and measure - Production lines and transfer lines - Special equipment, special machines - test stations - setting and riveting devices

CP Tech GmbH from Büren has been part of the Nedschroef Group since June 2017 and focuses on innovative in-house products, engineering services, high-performance components and complete solutions for the automotive, motorsport and aviation industries. The focus of the corporate strategy is on the development of new mobility concepts, shaped by global trends such as e-mobility, lightweight construction, networking, sustainability and autonomous means of transport. With around 210 employees, CP covers the entire value chain from development through project management, production and assembly to testing and validation of complete vehicles. The core competence of CP lies in the production of high-precision lightweight components from high-strength steels and the interaction of hand-held welding processes, heat treatments, mechanical processing, including the associated device concepts. CP also has its own agency in Shanghai (China) and works there with various companies.

Services for the thermal processing of technical components. From prototype to production part. Listemann AG is an internationally operating company with headquarters in the Principality of Liechtenstein. Since 1990 we offer our customers successful material know-how, from consultation to production. Our technology base are thermal processes in vacuum and inert gas, which are carried out for the production or processing of components in three production facilities in Liechtenstein, Switzerland and Poland. One of the largest vacuum furnaces Europe allows treatment of large components (within D1, 5xH1, 8m). The services offered by the Listemann AG includes the following key activities: • soldering and heat treatment in vacuum and inert gas • gas nitriding and nitrocarburization • Thermal spraying (APS) • Electron beam welding (EBW) • Sintering of MIM parts • Material and Process Engineering. Through cooperation partners, we also offer laser generation. All areas of production are certified to ISO9001. The location of Eschen / FL has an additional certification in accordance with ISO 13485 and the location Winterthur / CH according to EN 9100 and NADCAP. Do you want a finished component relate then we also coordinate the procurement of materials and machining.

The metalworking company G.B.G. specialises in precision machining based on customers’ drawings and projects. Since 1969 it has offered concrete and original tailor-made solutions at high quality standards to satisfy all Customer needs. The workshop stands as an example of Made in Italy excellence in terms of production and assembly of customised high-precision mechanical components. Commitment, precision, reliability, organisation, synergy between human intelligence and advanced manufacturing techniques: this is the present and future of the company.