The focus of the entrepreneurship in the SCHERDEL Group on people. In this case, the social commitment to the employees is the same as the relationships with customers, suppliers, service providers or partners. The recognition of individual performance, the granting of decision-making spaces that will encourage initiative and creativity, the opportunity for optimal education and training form the basis of a corporate philosophy that counts on traditional values and the cornerstone carry moral and ethical principles. The six corporate objectives are: 1 Customer satisfaction 2 Employee satisfaction 3 Innovation 4 Expansion of market shares 5 Protecting the environment 6 Return on capital employed

We are among the most important suppliers of products for the first use, mainly intended for manufacturers of tractors and heavy vehicles sector. Our production is based on the processing of components in full supply of steel,cast iron and raw with the primary objective of meeting the needs and expectations of the customer, through a continuous improvement of the product and supply systems, applying inside the 'Company Total Quality’. OMG has developed steadily over time its technical and industrial capacity and is the undisputed leader in the production of customer-specific: Axle shaft Transmission shaft Planet carrier boxes Wheel axles Exhaust manifolds Differential boxes Splined shafts Front and rear wheel hubs Reduction casing box Steering control levers PTO Casing Brake piston Steering knuckle PTO Shaft Wheel forks Flession bars OMG is today on the market as a supplier able to offer not only work, but a complete service that can start from the purchase of raw materials and ends with the supply of machined and assembled units. Production processes related to OMG machining are: Turning Teeth /Hobbing Milling Drilling Boring / Reaming Broaching Grinding Induction Hardening Threatment Mechanical assembly Washing I normally processed materials are: cast iron, steel.

Special machines, jigs and fixtures PEM building construction accordingly and make operational. There are designed and manufactured the necessary data for machinery and equipment controls. So PEM combines design, engineering and control technology under one roof. Installation and maintenance PEM mounted in its own assembly center machines and equipment in the customer order. Light crane height of up to 10.5 m and 2 pieces 50 t cranes and more than 3,200 m² mounting surface are available. PEM performs inspections, maintenance, inspections and repairs Experts gem. DIN from 31051. PEM accepts machine installation and implementation, including connection, commissioning and acceptance. PEM produces machines to predetermined performance measures as possible to restore (retrofitting), especially for used Tool or printing presses. Machining PEM performs with modern processing centers in-house and contract manufacturing CNC milling, drilling and surface grinding to a part weight of 25 t.

The focus of the production is the manufacture and sale of CNC milling and CNC turning parts, machine components, and magnetic systems and their processing to complete assemblies including purchase of required system components and services such as surface hardening, grinding, etc.

The company Ecomon is a service company in the field of assembly, equipment manufacturing and cable assembly. We are your partner when it comes to cope with simple high, flexibly and effectively to challenging assembly activities. Often there are works that are holding internal processes and basically usually do not belong to the core competence. The field of activity includes the installation manual (manual installation) and semi-automated assembly of mechanical, electromechanical, electronic and optical components as well as the equipment manufacturing small and medium series.Large series are also available upon request. It does not matter if you beistellen order parts or we take over the complete sourcing for you. Services: Installation of mechanical and electro-mechanical assemblies Assembly manufacturing precision engineering, optics, and hydraulics Equipment manufacturing Cable assembly Soldering, gluing and pouring of electronic components Spare Parts Production Assembly outsourcing (help in outsourcing of parts production) temporary or permanent foreign manufacturing Assembly plastic parts Inspection of incoming goods, picking, complete assembly of components (spare parts) On order-related parts, cable sets are preparing, storing your components and devices, and independent post-production (Kanban), soldering, sorting work, pre-or post-processing, system assembly, module manufacturing, contract assembly, production assembly,

The Schäfer GmbH is a specialist in the area of the bearing, linear, power transmission and conveyor systems. We also supply standard and special parts made of plastic. We supply engineering companies throughout Germany with parts in the areas of bearings, driving and conveying. With subsidiaries in Austria and Switzerland, we are close to our customers in these markets. In addition to pure commercial products we manufacture conveyor belts and flat belts and configure or build complete conveyor systems. In our production range gearing parts produce as timing belts and pulleys, chains and helical gears as well as flat and ribbed discs. Our comprehensive range of tools allows us to produce all the profiles and geometries. In addition, we are not restricted in the choice of material and produce for our customers Verzahungsteile in steel, stainless steel, aluminum and plastic self. Thus, we offer maximum flexibility and short-term reaction or production times. We welcome your inquiries. Sincerely, Markus Schäfer

Step by Step: From blank to paintable product The basis for a clean paintwork: a fat and grease free substrate. However, especially in the metal processing of permanent use of lubricants is essential that supplied us parts are therefore not readily paintable.

The SLR MetallbearbeitungsgesmbH, based in the year 1990, was taken over by SLR Gusswerk II BetriebsgesmbH as one-hundred-percent subsidiary factory in 1997. Since 1990 the SLR-MetallbearbeitungsgesmbH machines cast parts for SLR Gusswerk II BetriebsgesmbH by modern manufacturing machines. These cast parts are for the vehicle industry with high quality standard. Certification: ISO9001 Production of: CNC turning and milling turning workpiece milling parts contract manufacture of series production part assembly of component assembly for middle and high volume vertical turning and boring mill precision turned parts Products for: Drive and gear components Construction equipment Utility vehicles and agricultural vehicles Railroads, machine tool industry Hydraulic industry Materials: processing of all current metallic materials Machines: 11 processing center 7 CNC-lathes 3 3D-measuring machines 1 Broaching machine

The FLAMMMOTEC GmbH & Co. KG was founded (formerly STAN DRAWING, since 1954) 1993. We manufacture in the works of Berlin and Nauen stamped and drawn parts, primarily for the automotive, white goods and electronics industries, primarily in the United series. Other strengths lie in the field of manufacturing of components. We specialize in die-castings of medium size to large stampings (pressing force of up to 16,000 kN). Our stamping presses and transfer presses have table sizes up to 5200 x 2300 mm. The manufactured parts have up to 13 kg in weight and up to 1 m². In addition, welded assemblies are produced on a modern 6-axis welding robots (1 m³ action space, part weight up to 1000 kg) and spot welding machines. Production Our parts range covers all types of forged parts in all grades of material from small parts up to parts of approximately 1 m². For years we have specialized in the field of deformation of aluminum and stainless steel sheets (also in sandwich construction). In our pressing plant single, progressive or transfer dies are used up to a weight of 25 t. There are automatic punching machine with a printing speed 1000-16000 kN and a table size of up to 5200 x 2300 mm. There are additional single presses with a pressure capacity up to 6300 kN in use. For the production of sandwich parts (especially shielding plates made of stainless steel) is a 8000-kN large-scale press. On our punching machines are used to coil up to a width of 1200 mm and a plate thickness up to 5 mm, depending on the section that process. We are predestined for assemblies, ie. For the implementation of welded structures with six-axis welding robots and automatic joining of nuts and bolts In order to achieve an optimization of the work, we have assembly, placement and spot welding machines in use. By working closely with our partners, we are able to also surface coatings and galvanizing on grafts from powder coatings to cathodic dip coating offer. Logistics As a supplier with world-resident customers, we measure the Logistics Management utmost importance. As requested, we deliver just in time and place value on adherence to your requirements in terms of delivery quantity and packaging. Here we support a modern, always with the latest requirements customized IT technology. Our logistics department handles your incoming EDI, Internet or fax calls immediately and ensures that production, storage and shipping can implement your requirements promptly and respond to your needs. We work together on request as specified by you or by us carriers commissioned reliable partners and respond quickly and flexibly when difficulties arise. Toolmaking Our tool guarantees us a high degree of flexibility for changes and remakes of assemblies to customer specifications. It is an important partner of our pressing plant because downtime is minimized through him. Through close contact with our production, the tools are optimized in the short term. Preventive servicing and maintenance are an important prerequisite for safe production. 20 toolmaker / maintenance have three layers in use.

We are a small private company in Slovenia. Specialized in the manufacture of machinery for the construction, agricultural and industrial machinery and manufacturing machinery for woodworking.

We are an owner-managed company in the field of special machines, jigs and fixtures with a design and manufacturing area. In addition to manufacturing our own designs, we also manufacture on behalf of customers. We construct in the automotive, special purpose machinery and steel construction and have their own calculation department. We can up to 3 m length edit parts machined.

With the acquisition of the manufacturing operation of Zeiss Group in 1991, the foundation stone for the Böhm manufacturing technology Suhl GmbH was laid. The company had a solid base in manufacturing technology and an excellent potential qualified employees. Based on this, the company could develop quickly and is today a leader in the areas of equipment and special machinery, electronics, handling systems and manufacturing lines. In 2005, Böhm manufacturing technology Suhl GmbH parent company of Böhm corporation with headquarters in Zella-Mehlis. With its subsidiaries in Turkey and the Slovak Republic, the international market is being processed. With multiple six-figure investment and resistant innovations of Böhm manufacturing technology Suhl GmbH managed the transition from a parts supplier to a developer and producer of complex solutions. The company has almost 200 employees covers all segments of development and design, planning, construction, laboratory testing, manufacturing to on-site commissioning or procurement and logistics of large client companies.It will be offered with the highest standard of quality solutions to complex tasks from a single source. The majority of the Böhm-client operates internationally and 80% belong to their segment of the market leaders. Structurally, the spectrum from large international companies moved from many renowned industry through to indigenous SMEs: for example, the food and packaging industry, semiconductor industry, optical disc industry, medical and rehabilitation technology, automation technology, print media industry, textile industry and defense technology. In 2008, the company undertook several new projects and dared to join them as a system supplier in solar technology.

The company KABU-Kuhn Forming GmbH was founded in 2002. As subcontractors we work to order according to customer requirements. We produce stamping, bending and drawn parts of metal. We have particular experience in the processing of stainless steels. The produced parts can be washed in our industrial washing machines and thus delivered from oil and grease. There are a drum washing machine for bulk and pass a washing machine. When washing in the continuous washing machine the parts retain their scratch-free surface. Furthermore, we assemble modules and assemble with spot and projection welding on our two welding machines together. Also the welding of nuts and standard parts is possible. The picking of the goods is the number of items and packaging on request. We are always interested in new business areas and are able to produce for all areas punching, bending and drawing parts. To fully meet customer orders, we offer in cooperation with renowned moldmaking companies in the manufacture of tools.

Welcome to the RUNAWERK, your contact for sheet metal processing, front panel, keyboard slides and small equipment manufacturing. Our highly trained employees serve renowned customers in the electronics and engineering industries as well as medical, communications, measurement and control technology. RUNAWERK is also certified and officially approved supplier for leading large companies in the aviation industry. Our portfolio at a glance: - Faceplates - Membrane Switches - Sheet Metal Fabrication - Industrial Coatings - Repro & Screen Printing - Laser & industrial engraving - Rubber plates & stamps - Nameplates & Labels - Development & Design Our key competitive advantage is to say: Leading by quality. We understand the "zero-defect goal." We are convinced that we are always with high quality work processes able to achieve predictable, stable and controllable results. Our manufacturing processes are designed so that we avoid from the outset errors and thus produce lasting reliable products with high quality. For us, quality means "compliance with the requirements of the customers." "Quality is when the customer comes back and not the goods!"

The company was founded under the name SchwarzTEC SHS (blacksmith trade Black) in December 2009 and led to June 2011 as a pure online trading for wrought products. In June 2011, the Assembly service S + F that was added to and carried out installation work of all kinds. In January 2013, the company was renamed SchwarzTec and took over the company Elektro Radio honey in Titisee-Neustadt am 01.02.2013 and integrated into the company SchwarzTEC. The main tasks of the company are SchwarzTEC. Electrical installations, control panel, customer service, repairs and installation work of all kinds, and metal works, and trade in electrical and metal goods. Our focus is at the moment in electrical engineering, but are currently under construction of the metal area and looking for jobs in the field of steel construction / engineering, whether welding, bending, drilling, punching, shearing, sawing and assembling, we are equipped and able to produce a wide variety of components . We would be pleased as you can to help the supplier on. Your company SchwarzTEC

Briefly about RiWo-Gesamt: We have our production facilities in Austria, Croatia and Bosnia. Organization, assembly, quality assurance, etc., is controlled and monitored in and from Austria, QA and assembly. Croatia: welding, milling, turning - LG1 Bosnia: From 100 pieces. Turning, milling, edge - welding.

I am a mechanical engineer and live abroad. Here the service is very cheap for you. Just tell me your wishes and let me treat you cheap with perfect quality for you.

The company TOMA Engineering Turkey offers software and hardware solutions in the electronics sector for the automotive industry, Bundeswehr industry, medical technology, consumer electronics, telecommunications, agriculture, sensors, security technology and other industries. In addition to a very modern EMS production, a very young and highly motivated team of engineers, TOMA Engineering Turkey has its own PCB production. Of course, this allows us a high degree of flexibility in pricing, delivery times and minimum quantities. Through our management systems and certifications, we handle every project with outstanding quality and reliability. Even if you are not currently looking for a new supplier, it is always helpful to be informed about possible other suppliers in the event that the situation changes. If you are interested, I can also send you our presentation. If you have any further questions by then, I am of course at your disposal at any time.

As an innovative master craftsman and outsourcing partner, we implement the full range of metal construction with individual solutions, inexpensive, on time and with perfect craftsmanship and offer our services for you - of course also with artistic standards and according to your own ideas. As an extended workbench for your company, we can support you flexibly, competently and on time in the cost and personnel-saving implementation of your projects. Our services: - stainless steel technology (welding, machining and processing of stainless steel) - Aluminum welding technology - Processing and repairs of molds - Prototype construction according to information - small series - Individual custom-made products - On-site service - light metal construction - Assembly and disassembly of machines and systems - surface treatments - plant engineering - welded structures / steel structures We would also like to make our resources and services available to you and look forward to a personal meeting and good cooperation. If we have piqued your interest, we look forward to hearing from you. Imprint: According to § 5 TMG: Serkan Bahtiyar MSB stainless steel technology Graf-Konrad-Str. 79 89584 Ehingen Contact: Telephone: 07391/75 22 99 Fax: 07391/75 82 98 Email: info@msbedelstahltechnik.de