The company Emil Niggeloh was founded in 1899 in Ennepetal, Germany, and is concerned since the production of fasteners. Over time there was a specialization in small to medium quantities of high-quality specialty and standard screws. The company currently employs approximately 50 people and is very flexible due to its structure.

We believe to gain experience, but the experience us. Eugène Ionesco This quote by Eugène Ionesco brings our philosophy best expressed, because we are a family business with decades of tradition. We are a reliable partner for seamless service including planning, consulting, installation and customer service in our business compressed air technology. And the system supplier in the metal processing for simple or complex components, high-precision single and serial parts to assemblies ready for installation. For quality and timely delivery, we are with our good name for many years.

On moulding markets since 1989, SPIMECA is a recognised expert in its speciality : Design, study and production of metal moulds for the conversion of plastic, rubber and thermohardening materials. AREAS OF EXPERTISE With an integrated design office and appropriate resources such as CAD-CAM, Methods, High Speed Machining and Palletization : DESIGN - STUDY - MANUFACTURE Based on requirements lists and plans, tools for moulding technical, visible, shaping parts made of thermoplastic or thermohardening materials. Prototype moulds, medium and long series, single or multi-cavity, with hot or cold channels, up to 3000 kg. Press tests and metrology reports. TECHNICAL ASSISTANCE Modification, improvement and repair of existing moulds.

The Franz Huber GmbH is a recognized supplier companies with 25 employees, located in the areas of Mechanical Production (range: x 7300, y 1500, z 1800 mm), oxy-fuel cutting and welding constructions has been established in the southwest of Germany. With our new machining center we are able to process work pieces with a length of up to 7.30 meters and weighing up to 10 tons with maximum accuracy. In June 2009, we received a new machining center with rotary table 2500 x 2500 mm (parts up to 25 tons). Our qualified staff that has a sound training (technicians and master craftsmen and welder qualification tests) and our modern machinery to help us quickly and reliably to the needs of our customers to take. We manufacture assemblies, weldments, cut parts and assembly units are stress relieved to customer, sand or glass bead blasted and painted.

Production of technical springs, leaf springs, flat springs, contact springs, stampings, stamped and bent parts, bending parts 2D laser parts max. 3mm stainless steel and 6 mm mild steel grades Individual production and batch production. Assemblies and assembly

Our services at a glance Melting range Electric induction furnace with 3 t crucible contents, Two-shift operation Formereibereich Furanharzformerei, for hand-molded parts up to 2.5 tons unit weight. Two hand shape places conventional type for individual one-off production. Shape space for Großgußteile. Naßgußformerei, for parts up to 250 kg per piece for individual and small series production. Machine molding, max. 60 kg unit weight. HWS air impulse molding machine Box size: 500 x 600 x 340 mm Casting materials Cast iron: EN-GJL-200 EN-GJL-250 EN-GJL-300 Spheroidal graphite cast iron: EN-GJS-400-15 EN-GJS-500-7 EN-GJS-600-3 EN-GJS-700-2 EN-GJS-800-2 Special materials: EN-GJS-400-18-LT EN-GJS-350-22-LT

Innovation for tomorrow ... The innovation of light metal casting by the ALKO METALLGUSS-GMBH is tradition. The vision of a generation left a Leichtmetallgießerei arise at a time when this metal was increasingly used in industrial manufacturing. We continued the development continues with the core competence for sand casting and invest in the future! Today's expected production depth is based trend-setting by constantly adapting the production facilities to the needs of our customers. The casting production are affiliated with the most modern manufacturing equipment externally. As a well-established aluminum sand foundry, we are able to future-oriented and performance-based offer the entire range of products from raw casting on the machining, surface treatment and assembly our customers. Through investments we meet the needs of our customers, so our mid-sized foundry well prepared for the future requirements of the market, and in the future is at his home site a reliable partner.

The core competence of our company lies in the design, manufacture and processing of zinc - diecast and plastic products - injection molded parts. With high-quality technology and dedicated employees with the needs and requirements of our customers are met. Since development, mold making, sampling, surveying, pilot production and production takes place in our home, we guarantee a flexible and competent production process. h2> Our strengths /h2> Our nearly 30 years of experience we are happy to pass on to our customers. We develop and produce according to customer requirements, hand finished pattern and zero series will advise you gladly. Since everything stays in one hand, short-term changes can be implemented quickly. Our strengths are for you: * Flexibility * Short term delivery * Competence * Reliability * Production in 3-shift operation h2> Die-cast zinc /h2> On our 20 PLC-controlled casting machines we manufacture zinc products from the zinc alloys Z 410 and Z 430 according to DIN 1774, primarily for the furniture and window industry, but also for other areas of application.Is produced with modern machinery that has a clamping force of 50 tons and are on the current state of technology. Because of our size we produce machinery parts up to about 500 g and a length of about 250 mm. For further processing of these parts are * Drill, cut, thread cutting, deburring, trovalieren * Finishing (yellow chromating, blue chromate, silver surfaces / chrome-6-free, nickel, black zinc coating, KTL coating ...) * Packaging (cardboard, octabins, bags, plastic packaging, wire baskets ...) according to customer requirements. h2> Plastic Injection Mould /h2> Various plastic injection parts, inter alia, for the window industry are manufactured on 6 injection molding machines. Is produced with modern machinery that has a clamping force of 50 tons and are on the current state of technology. The plastic parts range from 1 g to 200 g piece weight.We process plastics such as PP, PS, ABS, PA6, PBT, POM and Megol. The packaging and logistics is done according to the customer. h2> Mould /h2> The molds for zinc and plastic parts are designed and manufactured in-house tool. The design department works with the CAD system (AutoCAD 2004 and Inventor 8) and the CAM system (MasterCam 9). It can take place a data exchange formats such as on DWG, DXF, IGES, Step and satellite. All initial samples are measured by us and upon customer a first sample test report is created. The forms must be kept for safety in a special fireproof storage room. The machinery consists of five CNC milling machines (max. 500 x 400 mm), four manual and four controlled die sinking machines and various machine tools. By the trained in-house young we always expand (annual) our team in tool making.

Laser Engineering Manufacturing of prototypes, Production of small series, Serial Production Customers: precision engineering, electronic industries, toolshops, suppliers, laboratories, research and development, jewellery, watch-making industry, optical frames industry, medical technology, designer etc. Materials: steels and aluminium from 0,05 to 2mm NF-metals from 0,05 to 1mm precious metal on inquiry silicium and ceramics Cutting: matrix, contacts, circuit boards, conductors, chain links, rings, cylindrical pieces etc. Welding: Our machine turning process enables watertight welding without additional alloys. Different metal alloys can be welded together with the laser. Marking: running serial numbers, trademarks, symbols, marking of tubular or solid bar pieces, logos, bar-codes, data matrix codes, product-codes, micro engraving Precise and Flexible Advantages that count!

Industrias Peralta was founded in 1995 with a determined pursuit of quality in the machining of Taylor-made pieces. Thanks to this idea of quality, in materials but also in services, our company has growth constantly working for sectors such as Iron & Steel Industry, Naval, Automotive and other manufacturing companies.

The company BIRD CNC MACHINING GmbH is headquartered in 76547 Sinzheim (near Baden-Baden) and is an innovative family business that specializes since 1976 in the manufacture and CNC machining of high precision turning, milling parts and the assembly of components has. We offer fast, non-bureaucratic and competent help for the problems of our clients in turning and milling small batches and sample parts. 45 years Dreh-/Fräserfahrung 28 years CNC experience 25 years of experience in crafting mechanical components for laser sensors Materials: - Stainless Steel - Aluminium - Plastics - Non-ferrous metals ... Batch size: - 1 - 300 pieces Workpiece size: - Dice: up to 400mm edge length - Round material up to Ø 130 Machining of 5 sides: - A set-up Highest shape, position, passport, and surface accuracy Full service: - Blanket orders, kanban, picking, surface treatment; Custom transport containers; consignment store

Our company was founded in 1991 and continues to evolve forward. Next to the stairs production, the manufacture of gates and fences, railings and general metal more and more connections develop in the direction of machine and plant engineering. The manufacture of welded assemblies and machine base frames plays an increasingly important role. Extensive machining for large parts are possible on nearby farms cooperation. With subsequent powder coating, we supply finished assemblies to our customers. We currently employ total at both operations a variable workforce 25-30 man! Farmer for both companies - Mr. Alfred Wojan We hope to have piqued your interest and we look forward to inquiry and orders from you. Our Service - Manufacture of welded assemblies and machine base frames after .. Drawings. By the client - Exhibition of stairs, gates and fences - Advice and accurate measurements on site - Extensive machining and hot-dip galvanizing on . Kooperationsbetriebe.möglich - Installation of metal stairs, gate and fence systems in the radius of 50 km - Corrosion protection / coloring - Organization of transport to the customer We mainly manufacture welded assemblies for mechanical engineering and plant construction, steel St 37 area and St 52, processing of profile steel sheets, by the possibility of subsequent powder coating, we are bound to the following dimensions - Oven size 9m x 2,5 m x 3m trouble-free coating possible 8m x 2,3 m x 2,8 m to 2.5 T unit weight

Power spectrum measurement, Architectural Technology Your advantages: Years of experience in the 3D Measurement Experience in programming and installation of Audi DMIS measurement and IDA programs for all standard CMM types Measuring rooms in Ingolstadt, Wolfsburg Perfect teeth of expertise in metrology and Engineering High flexibility due to low overhead

S.C.Dr. Köcher SRL – 100 employees Bucharest / RO * Research and development * Tool design and construction for aluminium die casting * Die casting moulds for aluminum and zinc alloys and plastic injection moulds * Aluminium casting house * Machining * Mechanical Steel Constructions * Primary CNC-Machines Components * Krause Products sales * ISEL Automation CNC Machines sales * CNC OEM applications(laser, plasma, welding etc.)

We are a medium-size exempt private company and have experience for many years in the plastics processing. Our company is in the beautiful sour country in North-Rhine/Westphalia between Siegen and Dortmund directly to A45. Our products are customized articles from thermoplastic plastics of all industries (e.g. automobile, sanitary, cosmetics, household, mechanical engineering, electrical industry, garden,…), as well as the complex building groups installed from it with accessories. We exclusively work as suppliers and have no own product program. We stand for experience of many years within the range coupled with a competent young team for new ideas, with dynamics and high flexibility beyond that profit we from our the plastics processing. Beside well-arranged production, assembly to complex building group and printing of their articles on in our house, we co-operate with very competent partners, which paint, metallize and chromium plating their products! For the preparation of their tools we co-operate likewise only also highly competent partners. The maintenance and smaller repairs are accomplished in our house in the own tool construction at our expense! We have parts with Shot weight jet moulding machines within the closing force range of 250 kN to 2700 kN, with those con approx. 0,1gr. to approx. 450 gr. fully automatic to be produced can. We process all thermoplastic plastics, how e.g. PP, PE, POM, PVC, ABS, Surlyn, PA6.6,…, in addition we can supplement all finished plastics with all usual filling and reinforcement materials! In our modern automatic warehouse we have to store additionally possibilities created their products well-arranged and normal! It belongs to our enterprise principles to orient our acting at the requirements of our customers to react competently and flexibly to customer needs our service concerning the time and cost factor for the customer to optimize and highest Qualitätsanferderungen fulfill! The Meinhardus-plastic technology team will also create in future the necessary conditions to the quality assurance of the services of the enterprise and seize additional necessary measures when required immediately. Quality is not only to reflect the requirements of our customers, but when are regarded to challenge!

General machining, prototyping, series production. The company TIKT industrial projects was founded in Germany in 1999 and is a recognized name for himself with it, reliable and cost-effective to provide the high-tech industry with parts and assemblies from all machinable and formable materials. These quality products are manufactured according to customer drawings in license holdings in the former Yugoslavia. We can help your company reduce costs and achieve savings by providing production capacity. In this case, the company's founder, who was born in Germany Kresimir Bodrozic, his Croatian origin comes to good, so voice and mentality barriers are virtually absent. With highest personal use, is the axis between the customer and the production, made very efficient and stable. Transport difficulties we reply with our own vehicles at all times to respond quickly and flexibly. Our motto is: quality, personal commitment and reliability is your satisfaction.

We are a medium sized company in the metalworking industry with 18 employees. We precision turned parts to customer drawing and have specialized in mass production. As your competent partner we want to achieve together with you the best solutions! Our over 35 years of experience in the manufacture of precision turned parts is supported by our motivated employees implemented.

Optimal Solutions The customers of our customers wanted often customized technology solutions. Through our experience in machining and metal forming, we can respond quickly and flexibly to these wishes. Related material, sophisticated processing methods ensure at the IZT the production of reliable products of excellent quality. We create the conditions to our customers in getting kürzerern development cycles can offer Qualifying Products wirtschaflich convincing. Excerpt from power spectrum: * Methods Planning * Stepped tools * Follow-on composite tools * Elementary study concept * Project planning and organization * Simulation and design of production tooling * Transfer Tools * Preliminary study tool and mold production technology * Tool Layout and tool production technology * Provide resources technology to support their project We are an innovative organization that is engaged in the following areas: - Machining - Tool - Forming - Welding Technology - Assemblies

We made the cutting parts on CNC cutting machine (oxygen and plasma). We are able cut steel plates (S235, S275, S355, C45 etc.) of thickness from 1mm to 200mm. We can offer welding steel construction to weight 6000 kg and machining on horizontal boring machine. More information om e-mail rod@kovpal.cz.

Precision is no substitute ... With this motto we use Reißig of precision mechanics GmbH variety of goals that we achieve with our usual perfection, reliability and flexibility. We are specialist in the field of precision engineering and serve our customers as a systems and service partners. Equipped with the most modern 5-Achsbearbeitungszentren and CNC lathes, the company produces items small and large production runs to high quality standards. As a complete supplier, we can offer you, of course, grinding (cylindrical, surface grinding). Materials: We process all grades of steel, stainless steel and non-ferrous metals such as copper, brass and aluminum, and plastics of current varieties. Processing methods: Our modern machinery enables the complete machining of demanding milling and turning parts. Industries: Plant Engineering * Mechanical Engineering * Automotive * automation technology * Special machine Heat treatment processes and surface coating: Are complemented our services through the Common heat treatment processes such as carburizing, nitriding, nitro-carburizing, as well as the best known methods for surface coating such as chrome plating, zinc plating, bronzing, etc. Our team is for you combined with quality machine tools and high-precision tool technology sophisticated machine components in metal-cutting manufacturing markets. We edit single, standard or optional parts to your exact specifications. Regular external and internal training the profound expertise of our employees is guaranteed. Welding, annealing, tempering, bending and all surface treatments we can miterledigen course by the same specialists for you. High quality - Short delivery times - fair prices ensure the future!