Our customer is the most important person in our business, whether it is present, whether he writes or calls. He is no stranger, but a living part of our business. He is the purpose of the content of our work. Our mission is committed to fulfill his wishes and profitable for both sides. Because our goal is the common success. It is in their mutual interest that we fulfill as many requests at once our customers. We therefore he gets everything from one source: From the design and construction of the parts to prototyping to production tooling. And in addition, we also manufacture the parts and assemblies in series and are able to improve upon request. Our services at a glance: Injection molds, plastic parts, system assemblies, finishing (painting, vapor deposition, chrome plating), assembly, laser marking, laser welding, pad printing and screen printing, ultrasonic welding, laser marking (day-night design), hot stamping, foil stamping,

SEI WOO Hi-Tech Polymer GmbH was founded in 2000 and is a subsidiary of SEI WOO Rubber Works Pte Ltd of Singapore, since 1962 a worldwide manufacturer of customized components made of elastomers and thermoplastics. Production and sales In Austria, we have specialized in the injection molding of liquid silicone moldings, which are custom designed for business partners from all over the world. Especially in Europe, we are also responsible for marketing and sales of services or production from the Asian corporate offices, which are located in China, Thailand and Singapore. Liquid silicone rubber (LSR) technology A world leading tool technology and injection molding machines of the latest generation allow us to fully automatic, waste and rework-free production at the lowest cost and highest quality level. This tool technology also allows the use of the needle-closure technique. Asia + Europe - Your Advantage Through this intercontinental production orientation, we can offer you the following: * A wide range of components from materials such as liquid silicone, solid silicone, rubber and thermoplastics (Topic: Suppliers lift) and * The right technologies used in the right location (Topic: quality and price optimization) Quality standards * ISO 9001:2000 * 6.1 VDA

Plastic injection mold

We are an experience manufacture of plastic technical parts, packaging, tableware and specialized in meal service equipment for onboard services. In the past twenty years we have been producing these onboard service items for companies like Air France, LOT, KLM, TAP, Emirates, Qatar Airways, Oman Air, Saudia, LAN Chile, Virgin Atlantic and many others. In those years we have built up a lot of knowledge to meet your requirements in development, production, support, short lead times and logistics. With our molding systems we can be very flexible for bigger but also smaller quantities. Our relatively small organization and the modern machines makes us very competitive! I am sure that we can become a value partner to your company and would be honor to have the opportunity to better present ourselves.

Our core business is design and manufacturing of injection moulds for pallets, bulk bins, waste containers, crates and medium-to-large parts for other applications. Here you can watch our company video: https://youtu.be/MVRRBtNxbj8 Highlights of our company: -since 1982, more than 2000 moulds built for products weighing from 500 grs up to 40 kgs -100% production in our two plants in Jesi -Customers from 35 countries all over the world -High flexibility and easy communication thanks to a lean structure -Product design, injection moulding analyses, reverse engineering, prototype moulds ecc. -Trials in our factory on machines from 750 T to 4800 T -Assistance during start-up at your site -Service and repair, also at your site, also on moulds built by other moldmakers

FOPEX Plastic company has been founded at October 2004. During its short existence it reaches trust of its partners around the world because of its top quality work and liable spirit. Ourmain subject of manufacturing ist: manufacturing of plastic pressed elements for automobile industry, electrotechnical engineering and home appliances ultrasound plast welding assembly of plastic pressed semi-products and elements Our goal is: to provide services at world-wide quality standards to implement modern trends at plastic processing to improve a qualifications of our employers to minimize negative impact for enviroment to the lowest possible level

Precision mold Injection Mold with over 50 years of experience. We develop and build according to specifications and your ideas simple and complex injection molds. A complete design in 3D is always included. Of course, the tool is produced in our own tool for the data and then patterned. It left only ready for production injection molds our company. We are strong everywhere, be it a one-fold or 64-fold tool, it does slide, core pulls or drag plates, with or without hot runner (of your choice), we solve the task. The surface can be polished, textured or etched, we know our stuff and use it the right steels. Even after years, we are able to carry out revisions, modifications or repairs quickly and inexpensively. Precise molded parts of thermoplastic With us you get the injection molds and molded parts from one source! We process all thermoplastic materials (except PVC) from 005 to 300g shot weight on Arburg injection molding machines up to 160t, which are equipped with handling equipment. We specialize in parts for the electrical industry and equipment manufacturing (household appliances), equipment for heating, ventilation and medical technology. Another specialty is the encapsulation of inserts of all kinds Post-processing such as assembly, printing, packaging and chroming are always welcome. Precision parts from thermoset With us you get the injection / compression molding and shaped parts from a single source. We process all thermoset materials from 0.05g to 1000g shot weights on Arburg injection molding machines up to 100 tons and Bucher presses up to 150 tons. Put us to the test. Let us offer your plastic parts. Our versatile production enable us to help you fulfill almost every wish when it comes to thermosets. CNC Machine Shop Our options: • Complete machining • driven tools • subsequent milling and grinding work • We process materials from brass to INOX • parts of up to 200mm diameter • rod diameter to 42mm and lengths up to 3000mm Special machines / devices

P / S KUNSTSTOFFWERKE AG is an innovative medium-sized company in the plastics processing Industry with an own tool. From over 1000 tools, we produce technical plastic parts from 0.1g to 2.0 kg on powerful Injection molding machines with a clamping force of 150 up to 5000 kN and presses with clamping forces from 600 to 3000kN. Product-specific handling systems and peripherals to ensure safe production process at a consistently high level of quality. From our many years of experience in the processing of thermosets and thermoplastics materials (unreinforced, reinforced, modified or high-tech plastics) can our customers always benefit. The diversity of our production program, below are some examples, requires a special expertise. Plastic parts with a highly polished, verspiegelbarer surface design as part or plastic-metal Compounds; System and component assembly; Pure assembly work; Printing, welding and two-component injection molding.

KERO AG - innovative and customer-oriented For over 30 years we have been developing and manufacturing plastic parts of all kinds for our global customers from all industries. Thanks to our expertise and continuous investment in the most modern manufacturing processes, we are your guarantee for the highest quality at competitive prices. With us you get everything from a single source, from the project to the finished plastic part. You benefit from over 25 years of experience in plastic injection molding and mold construction, paired with the latest specialist knowledge, flexibility and the highest level of quality awareness. If necessary and useful, we can fall back on a large network of specialists. This enables us to offer our customers tailor-made solutions at affordable prices. Our sustainable production is characterized by the constant improvement of work processes and the careful use of our resources. This enables us to secure numerous jobs for the future. KERO AG is your reliable partner!

Espisa AG specializes in technical injection molding parts from 1g to 7000g on injection molding machines from 50T to 1600T

The Ponti Guarnizioni company, with its 40 years of experience, has achieved good skills in the process of transformation of elastomeric raw materials. It specializes in molding technical articles on customer's drawing, in various types of standard and special compound, also with restrictive regulations, using hydraulic injection and compression presses. The elastomeric materials are: ACM - AEM - AU / EU - CO / ECO - CR - EPDM - FKM - VMQ - FVMQ - HNBR - NBR - IIR - CSM - NR - SBR - FFKM. The management system conforms to the UNI EN ISO 9001: 2008 standard and from 2018 will be the certification of compliance with UNI EN ISO 9001: 2015 standard. The range of products is wide and includes: bushings, sealing rings, molded and / or cut washers, caps, solenoid valves, membranes, filter seals, coffee machine seals, binocular seals, rubber gaskets -metal, special o-rings for sizes, materials and tolerances. The sectors to which its products are intended are different, among the main ones: oleodynamic - pneumatic - electronic - optics - appliance - lighting - filtration - oenology - agricultural mechanization. The company interacts with qualified suppliers, specialized in the design and manufacture of molds, in supplying raw materials and in the finishing stages of the production cycle. It has competent staff, able to understand the needs of the customer, providing excellent consulting technical and commercial assistance. The Ponti Guarnizioni brand is present in several European and extra-European countries, with good competitiveness, thanks to a business policy tailored to meet the specific needs of the Customers, also accepting requests for small production lots, guaranteeing dimensional tolerance ranges and hardness of the materials more restrictive than the standards governed by the regulations in force in the rubber-plastic sector. For more information, please visit the website: www.pontiguarnizioni.com

Kaplast is a private company whose primary business is the production of plastic goods with the technology of injection moulding. We are the major supplier of crates for all major breweries in the former Yugoslavia, as well as for water companies. We also produce technical components for electrical, household, and car industry. We rely on a good relationship with our suppliers, with a goal to fulfill all the needs of our buyers. Kaplast has 35 years of experience in injection moulding, and is looking forward to continuing its technological and financial growth. The possibilities in our manufacturing plant are the following: - injection moulding - silk screen printing - recycling of HDPE and other polymer material - sale of recycled material - filling crates with needed bottles

Plastic molding for thermal, thermosets and elastomers

We produce plastic parts with a wide variety of manufacturing processes, including injection molding and thermoplastic foam casting parts and process them according to customer by ultrasonic welding or hot embossing. Currently we supply our products to the mechanical, electrical and packaging industries, in addition, we have specialized in the processing of high-performance plastics for precision parts. Thanks to our partner company, we can also offer components and Asia. We manufacture in Asia components from the following areas: Injection molding thermoplastics, elastomers and injection molding deep drawing.

ABOUT US In January 2020, in Istanbul, Eroğlu Kalıp Metal San. ve Tic. Ltd. Şti. has been established. We manufacture metal injection and plastic injection molds using hot work tool steels and plastic tool steels. We mainly serve the Automotive, White Goods, Electrical-Electronics sectors. By equipping our facility with advanced technology CNC machinery and equipment, we aim to carry out the design and production stages with great care with a staff who are experts in their fields, experienced and know the technology closely. our vision To ensure that quality is adopted and developed as a company policy based on customer satisfaction. In the Turkish Economy of our company; To make our position in our sector permanent by constantly developing and growing in our fields of activity in parallel with the developing technologies by adhering to the principles of business life, business ethics and business culture. Our Mission To provide products and services that will create value beyond customer expectations in line with our company and our quality targets, to be an exemplary and pioneering organization in the sector. DESIGN We aim to manage the design process in line with their requests and opinions, always in communication with our customers. Performing kinematic and dynamic analysis in CAD environment in order to anticipate and resolve the problems that may occur before manufacturing We aim to achieve the best result by combining our experience in gating system design, customer expectations and injection molding analysis program.

Our advantages are more than thirty five years of experiences in the field of injection moulding, flexible production capacities and our completed approach to the realization of the project requirements, with emphasis on achieving your quality standards, price frames, deadlines and products properties. We offer Complete product solution which includes the entire development of the plastic product. You just present your idea or design and we carry out all the necessary project steps up to the series production. Our supplementary technologies are Ultrasonic Welding and Vacuum Metallization.

Oplast is a custom thermoplastic injection molding company in Slovenia, Europe. For over 35 years our mission is to provide complete and flexible injection molding services using comprehensive processing expertise and state of the art equipment in a professional, customer-focused environment. We operate three manufacturing plants employing over 150 skilled and motivated workforce. We specialize in manufacturing top quality injection molded parts in mono as well as two and three components (co-injection, over molding) from many varieties and combinations of thermoplastic commodity resins, engineering grade resins (filled and unfilled) and elastomeric »soft-grip« materials (TPE/TPU). We provide complete and flexible injection molding services using comprehensive processing expertise and state of the art equipment in a professional, customer-focused environment. Our staff of Designers, Engineers and Tool Makers have a comprehensive combined experience with backgrounds in many complex applications for different industries. Main product line: Technical and precision injection molded parts and assemblies up to 700g shot weight and up to 3 different co-injected materials per part (with or without metal inserts) on CNC controlled machines from 350 up to 3000kN in 3 shifts, 24h per day. The complete molding eXPerience... Injection molding parts in mono as well as two and three components (co-injection, over molding) from many varieties and combinations of thermoplastic commodity resins, engineering grade resins (filled and unfilled) and elastomeric materials (TPE/TPU) etc. PP/PS/ABS/POM/PVC/TPE/TPU/PA/CA/PBT/ESD compounds, to name a few. Injection molds construction and building including hot runner molds as well as two and three shot co-injection molds, insert molds etc. CAD/CAM including 3D volume design, 2D drafting and fast prototyping Test runs with protocols using state-of-the-art CMM and force-less optical measurement systems Secondary operations like pad, offset and silk-screen printing, assembly, custom packing, labeling... Logistic solutions to bring products to the customer JIT at low cost - worldwide Metal parts with or without over molding up to three thermoplastic materials Quality Oplast is committed to providing top quality of products and services. All our facilities run under ISO 9001/ISO TS16949/ISO14001 quality/environment assurance system. Some of the main industries served: - Automotive - Electric/Electronic - Hand tools - Household Appliances - Packaging&Chemical

We are a medium sized company in the plastics processing. Our production portfolio mainly consists of injection molded components. We have 38 machines with up to 800 tons of clamping force in the 1K and 500 closing force in the 2K range. In addition, we work component development and Beuteiloptimierung as a service.