TMP Srl., A family in Emilia-Romagna (Italy), fulfills a variety of tasks, such as milling, turning, threading and drilling in various materials. Individual customer requirements for heat and / or surface treatment can also be met. The support of the German-speaking clients is carried out by the German collaborator, Sabine Mueller. An upcoming personal acquaintance is at the Hannover Fair from 7 to 11 April 2014 possible!

Manufacture of precision turned parts ready for assembly dia. 0.5-20mm. (including secondary operations, plating, etc.)

We have been manufacturing and processing our own aluminum profiles for 25 years. Our company is a 100% subsidiary of BIBUS HOLDING AG. As part of the Group's network, we have access to 61 companies worldwide and have a wide range of products and services in the field of metals, stainless steel and special materials. Our Iserlohn service and logistics center is centrally located in Germany. From there and also our production in CH-Möhlin / near Basel, we deliver to our customers within 48 hours after completion.

Custom-Made Solutions for Individual Products In accordance with customer demands and wishes, ISOVOLTA – in addition to manufacturing high-quality laminates in the form of sheets, tubes and rods – also offers processing of thermoset materials. Different materials are shaped by processes such as cutting, grinding, drilling, turning, milling, gluing, mounting, punching, jet cutting or painting according to individual customer specifications. Based on our expertise in material-specific selection and production-technical implementation as well as our years of experience in job shop, serial, and mass production, we are able to develop the best possible process for each product. Range of Materials Phenolic Cellulosic Paper / PFCP Phenolic Cotton Cloth / PFCC Phenolic Glass Cloth / PFGC Melamine Cotton Cloth / MFCC Melamine Hard Glass Cloth / MFGC Epoxy Glass or Glass Roving Cloth / EPGC Epoxy Glass Mat / Polyester Glass Mat / EPGM / UPGM Melamine-Lined Hard Paper / MKHP / INBORD® Silicone Glass Cloth / SIGC Special Laminates / Special Materials / CFRP, KP, PIGC MAGNOVAL® CONT AVAL® GX_11.3309 GWS RP High-Performance Rings GF-UP / GF-EP ISOVAL® R-AL Competence in Soldering Equipment Soldering Frames are primarily used to transport PCBs in soldering machines while simultaneously fixating “through-hole components” by using Top Hat Systems. With our specially developed ESD material, which is able to endure high temperatures and chemical resistance, the ISOVOLTA Soldering Frames are able to withstand thousands of soldering cycles. ISOVOLTA Soldering Frames and masks are custom-made innovative products. The design of the mask is defined by the PCB, the machine and the customer`s requirements. Possible combinations of the ISOVOLTA Universal Frame, ISOVOLTA Soldering Frame and the ISOVOLTA Flexible Suppressing System. (ISOVOLTA Suppressing System: ensure suppression and alignment of critical PTH components.) Combination ISOVOLTA Soldering Mask and ISOVOLTA Suppressing Panel for reliable and accurate alignment of PTH components. Innovative solutions guarantee quick and comfortable handling. Product combinations Top Hat Systems Universal Frames Flexible Top Hat System Magnetic Carrier Coating Frames Pressfit Tools Router Tools Hand Soldering Tool

ABOUT US With our customer-focused approach, we provide high-precision and reliable machining solutions to help your business move forward. Üçes Makina operates in İzmir, delivering machining services primarily to the automotive and machinery industries, as well as various other sectors. Backed by 20 years of experience and a team specializing in processing high-alloy, ultra-precision components, we are here to serve you and your customers. About Our Services We offer high-precision machining, CNC operations, and custom part manufacturing services for the automotive and machinery industries. Our expertise includes: CAD-CAM solutions CNC Turning CNC Milling Custom Fixture Design and Manufacturing Machine Design and Manufacturing Spare Parts Supply High Precision You can rely on us for processes requiring the utmost precision. At Üçes Makina, we combine over 25 years of experience in high-precision part machining with our state-of-the-art CNC machines to deliver exceptional results in the production of complex components. We prioritize quality and reliability to ensure customer satisfaction. By providing tailored solutions for each project, we meet your precision and performance demands with excellence.

KOMOS GmbH: Your product idea becomes success. KOMOS is an industrial service provider with the highest standards of product and service quality. For more than three decades, the company has been manufacturing high-quality products made of metal, plastic and composite materials, also in combination with electronics and electrical engineering, on behalf of customers with a competent team and modern machinery. With its hybrid technology network of stamping, turning, forming and injection moulding, in-house research & development, assembly and packaging and many other services, KOMOS can realise almost any product vision at the highest level. Innovative with a system - for more than 30 years: At KOMOS, a 2nd generation family business in Bürgel, 75 employees develop and manufacture high-quality products for the medical technology, automotive, electronics, aerospace, construction and mechanical engineering sectors. The claim is always a long-term trusting partnership with the customers - for successful products, guaranteed 100 % Made in Germany. https://www.komos.de/unternehmen/ Production technology follows function. Punching and forming, plastic injection moulding and CNC turning, processing of plastic, metal and composite materials: KOMOS offers an extraordinary manufacturing breadth and depth under one roof in its unique hybrid technology network - together with its own R&D department, assembly, packaging, logistics and much more. In this way, it is not the technical possibilities but only your requirements for your new product that decide on the manufacturing. Learn more about our manufacturing technologies! https://www.komos.de/fertigungstechnologien/ KOMOS product strategy. Success for you. At KOMOS, we are open to your ideas and visions - and always ready to transform them into market-ready products with full commitment. This is done using a consistently applied methodology: from understanding your product idea as part of a non-binding initial consultation, through technical anamnesis, rough concept with proposed solutions and fine-tuning, to precise production and further processing. https://www.komos.de/produktstrategien/

We are a CNC turning/machining company located near Pamplona, Spain, equipped with state-of-the-art Japanese machinery (Nakamura, Citizen, Star, Okuma) and technology for both fixed-headstock (up to 150 mm in diameter) and sliding-headstock (up to 38 mm in diameter). We supply various sectors including hydraulics, pneumatics, wind energy, locksmithing, gas cylinders, motorcycles, bus seats, automotive, gear cutting, diverse machinery manufacturing, fluid control, etc. We work with free-cutting steels, carbon steels, alloy steels, pre-treated and stainless steels, brass, aluminum, bronze, and plastics in series starting from 1000 units

Professional machining Mikron was established in 2017. We specialize in machining services including, among others, CNC milling, CNC turning, conventional turning, drilling, threading and cutting. We execute both individual and serial orders using materials such as steel, stainless steel, aluminum, copper, bronze, brass and plastics. We have a well-equipped workshop and use new technologies, thanks to which we implement details to the production according to the documentation and provided patterns. We produce for companies from various industrial sectors, e.g. automotive, agricultural, electrical machinery, hydraulics and pneumatics sectors. We stand out on the market for the high quality of details, which goes hand in hand with competitive prices and short deadlines. After processing, all details are subjected to precise technical and measurement control. Our qualified staff allows us to adapt to the individual needs of customers. We are open to cooperation with contractors in the country and abroad. If you want to learn more about our offer, please contact us. We stand out for:: high quality of details, modern machinery, experience in the industry, use of modern cutting tools, technical and measurement control, programming based on the provided technical drawing or detail model, short lead time, competitive prices. We address our offer both to large companies and individual customers. Thanks to qualified staff, we guarantee you that each service will be made with the utmost care and precision. Our services: CNC Milling vertical 4-axis machining center of KAIDA KDVM 800L model, working surface 800x530x530mm; vertical 3-axis machining center of LEADWELL VMC 40, working surface 1020x520x520mm. CNC Turning CK6150x1500 CNC turning lathe, turning length 1150mm, turning diameter over support 270 mm; BT-300L CNC turning lathe with bar feeder, turning length 750mm, turning diameter over support 410 mm. Conventional turning Universal turning lathe KNUTH TORRO 250, turning length 2000mm, diameter 400m. Cutting diameter to 320mm CORMAK G5025 band saw, cutting diameter 320mm.

Our production plant is located between the Black Forest and in the immediate Hegau Proximity to the motorway A 81 singing - Stuttgart. MW-turned parts is a Präzisionsdreherei with tradition, and may on over 30 years History look back. Are manufactured ready for installation of rotation - and milling parts and customer specifications on modern CNC machines and conventional machines curve in small and medium series. For surface treatments such as hardening, grinding, burnishing, galvanizing, chrome plating, etc We have carefully selected and reliable suppliers in our area. Since 2004, we also offer in addition to semi-automatic slot - and Milling Machines Wage work on. They place their "semi-finished" turned parts for disposal and we mill them slots and key areas according to your wishes. Our production is subject to constant monitoring during production. Is measured with modern measurement equipment according to various methods. The measured values can be determined in both digital and visually using a microscope and projector. Also suitable test equipment such as calipers, micrometers, and other longer used. On request, we also provide sample test reports with test pieces from the current Production from, or we put our supplies material certificates and hardness - or Electroplating protocols at. As a medium-sized company, we calculate on a fair basis and provide our Customers depending on the distance to the hotel's own transport vehicle, or a Parcel service or for substantial orders with a shipping company. Routing orders and / or transportation needs of the customers can be considered. As a supplier of a wide variety of industries, we are also looking forward to your inquiry, the we will respond promptly.

Carbonella Rocco e Figli s.n.c. is a universal automatic turning company for parts made of steel and non-ferrous materials from 3 mm to 32 mm diameter. For more than 25 years now, we have been manufacturing parts in high quality for various industries like precision mechanics and writing instruments. Furthermore we offer full-service. We supply several Italian companies, of which many successfully export our assembled products to different countries throughout the world. A large percentage of our products is exported to Germany, Switzerland, France and England. We mainly ship raw items in several degrees of roughness. Upon request, those items can also undergo heat treatment and galvanic surface upgrades.

We are a contract manufacturer with 84 employees, located in Trier (close to Luxembourg). Our capabilities are: - Precise machining of work pieces with a weight of up to 46 t - Assembly (mechanic, electric, pneumatic) of components or complete machines with crane capabilities of up to 98 t and height of 14 m. Our machining centres have a travelling axis in x of up to 6000 mm, in y up to 3000 mm and take pieces with up to 46 t. Our turning machines take pieces with a diameter of up to 1620 mm and 8000 mm length. Under contract of our customers, we manufacture according to their drawings pieces of various sizes and applications. Gear box housings for various well known gear suppliers, hydraulic presses for the ceramics industry, roller presses for the cement- and mining industry, water turbines, handling units for the foundry industry, hydraulic units etc. cover the range of our possibilities. A welding shop within our factory building can manufacture the required welding components.

Based in Canton Ticino, Premec Tools has a mechanical engineering technical office and a precision mechanical workshop equipped with two 3-axis and 4-axis CNC machining centres, a CNC lathe, a CNC grinding machine for internal and external use, traditional lathes, milling machines and grinders and two CNC plunge erosions. Premec Tools can lend its skills to companies in the design and manufacture of precision prototypes in different materials, with application in any industrial field. Structure, systems and resources make Premec tools a reliable and flexible partner for complex and urgent production. Premec Tools Precision tools for more than just the writing sector. Available machines Rosa Flat Grinding 700×450 Studer Round grinding Ø100 L=200 Studer Internal Grinding from Ø0.8 to Ø120 Studer Internal External CNC Grinding Machine from Ø 0.8 to Ø 30 L=30 => Øe40 L=120 Studer Internal External CNC Grinding Machine from Ø 4.0 to Ø 150 L=400 Biglia Lathes machine CNC Ø150 L=500 Biglia Lathes machine CNC Ø150 L=500 with loader bar CB Ferrari 4-axis CNC machining centres programmable with CAD-CAM 1100×660 h660 Digma High speed machining centre programmable with CAD-CAM Agie EDM Electrical discharge machining Sigma Laser welding machine Laser engraving Zeiss Coordinate Measuring Machines (CMM) Discover how we can put our precision tools, technical office and workshop to work for you. Contact us

Sophisticated turning and gear parts require a high production know-how for realizing tight tolerances and complex geometries. Customers around the world appreciate the high quality of our products. On a total production area of 6,700 m² you have over 200 machines for high production capacities are available: the latest CNC lathes and gear cutting machines, conventional cam-controlled lathes, video check-sorting machines, 6-axis robotics and cleaning and grinding equipment. over 350 million precision parts are manufactured - mainly for customers in the automotive industry, electrical engineering, control engineering, medical technology and toy industry. To ensure our customers security for decision and investment, we have a quality management according to DIN EN ISO 9001 for our manufacturing and administrative processes: 2000 and DIN EN ISO 13485: 2003 certified and constructed. We also have a certified environmental management system (ISO 14001) and as a supplier to the automotive industry ISO / TS 16949 certification. We manufacture for you: Turned parts - Workpiece diameter of 0.8 to 40 mm - Examples: axes, anchors, bushings, sleeves, ball studs, pins, connectors, cylinder sleeves Turned parts for medical technology - Workpiece diameter of 0.8 to 40 mm - Examples: Angled post, screws, caps, conical crowns, assembly snails - One to seven-start worms from module 0.3 to module 2 - Workpiece diameters from 4 to 40 mm - Chase-and milled versions - Paired with optional cylindrical gears - Examples: drive screw, worm shafts, worm control Gears and pinions - Workpiece diameters from 4 to 40 mm - Gears and pinions from module 0.3 to module 2 - Straight and helical teeth - Examples: motor pinion gear pinion small gears -Triebe Of composite materials such as hard tissue, machine or stainless steel - Gear components starting with tooth number 6 and b Translation by Google Translate

We are a Automatic CNC Turnery (founded in 1983 ) that produce precision metal parts, components and assemblies We ensure: - reduced times for the realization of batches - constant quality on each piece - KAN-BAN deliveries, - For delivery, we make use of qualified carriers that offer a quick and safe service on the whole national territory and abroad. We are competitive with batches starting from 100 pieces, on diameters from 2 to 70 millimeters from the bar. Materials utilized: We make use of the best steel mills on the market, to always ensure a perfect performance of our products and we are able to trace each batch. In addition to common and automatic steels, light alloys (aluminium), brass, bronze, plastic, we have gained a large experience on the processing of: - Austenitic stainless steels series “300” - Ferritic and martensitic stainless steels series “400” - Alloys and super alloys, Inconel, titanium, duplex e super duplex - Alloy steels, quenched and tempered steels We manufacture particulars and components for the following sectors, according to the customer’s specific design: • Medical/Biomedical • Hydraulic, fluids flowing • Pneumatic • Packaging, Food Industry, Pharmaceutical • Automotive, Motorcycle and Cycling • Industrial Automation • Railway / Cableway • Electronic • Sustainable Energy • Gardening/Hobby • Earthworks and Agricultural in general • Window and door fixtures Where required, we can carry out the assembly of the Articles, in the specific area within our Production Departments and, for the Medical sector, we have a dedicated assembly hall

On our CNC machining centers and CNC lathes, we produce as a classic supply business a wide range of parts. And this both for small, medium and large series, as well as for prototyping.

Timos Mechanics is a mechanical engineering technology company. Knowledge and experiential experience in core services. Thanks to cooperation with research units, we provide state-of-the-art production solutions.

Kirschmechanik GmbH manufactures individual parts, small series and prototypes from a wide variety of materials such as aluminium, stainless steel, bronze alloys, steel and plastic using modern CNC machines.

The company Fedéco GmbH has over the years on long-and short-rotation Specialized processing. We have a large, mature Machinery allows us to produce even the most complicated precision parts. Through years of experience in this industry and very well trained staff we have to realize every customer in the situation. We are the point of contact that can offer all types of production of precision mechanics for customers. Be it the surface treatment or assembly of various components. Additional services such as Express manufacturing parts to customer or storage thereof are part of our self-evident Customer to do so.