With over 200 employees, we manufacture at our sites in ice rink, Schönbrunn and Apolda for our customers turned parts from a workpiece diameter of 0.2 mm to 250mm, threaded rods and assemblies on the most modern CNC lathes, machining centers and multi-spindle automatic lathes. It processes material from 0.5 mm to 65 mm diameter of the rod and 240 mm diameter chuck parts from almost all machinable materials (cutting steels, structural steels, case hardening steels, rust and acid resistant steel, V2A, V4A, titanium, brass, ECOBRASS, aluminum , plastics, and any other machinable materials) The production scope includes threaded rods to M42 or trapezoidal thread with a pitch to 6 mm up to 6000 mm length, gears (for steel to module 0.8 and brass to Module1). In separate manufacturing areas, we have created the ability to perform additional operations such as drilling, milling and sawing, bending, punching, pressing, broaching, welding, soldering, thread rolling and thread cutting and assembly work. Heat treatments and surface finishing are carried out in cooperation with selected expert partners. Highest standards of quality, reliability and flexibility are the basis to earn and build the trust of our customers. Through our ISO 9001 certified, process-oriented quality management system, we are to provide top quality consistently able to offer our customers.

The MBM Lychen GmbH is your competent partner for the manufacture of machinery parts in the installation qualities (IT 6 and IT 7) as well as the assembly of modules. We work on prototypes, single parts and series in all sizes and provide a job shop machine fixtures forth according to your technical drawings. In addition, our company sees itself as a "fire brigade" in case of damage to machinery and equipment. That is, in an emergency, we do your orders within 24 or 48 hours. The MBM Lychen GmbH has all the machinery and equipment for cutting shaping of the classic built-in components of all kinds. With the support of reliable partners we are further able to your needs in the areas of heat treatment, surface finishing and coating edit technology and sheet metal work in full. The following materials we process with our modern machinery: - Non-ferrous metals (aluminum, copper, brass) - Hot and high-strength steels, - Construction and quality steels, - Hardened and tempered steels, - Tool and nitriding, - Stainless steels, - Cast iron, - Nickel and titanium alloys, - Plastics

The company Linden there since 1948, we have spezialiesiert forward to tapping, CNC turning, CNC milling and welding of assemblies Complete with a welding robot. Our strengths are the thread forms. Many companies supply us with their half-products and we then thread forms in the inters, or welding of single share then complete assemblies together. The focus in the cnc machining is in the range of single and series production. If you have any questions about our manufacturing capabilities, we would appreciate an e-mail or fax a lot.

CNC Feinmechanik Berlin e. K. has been manufacturing high-precision turned and milled parts of all kinds for more than 40 years, supra-regionally and across all industries, and specializes in precision mechanical components and small and medium series. We distinguish ourselves by a high quality standard and our reliability. Our customers can rely on maximum flexibility even in the event of unforeseen changes. Our extensive machine park also allows us to manufacture complex sample parts and individual parts with great precision from all machinable non-ferrous metals, steels, plastics and magnesium alloys according to your technical drawings and specifications.

Production of bent wire parts and springs from Ø 0.3 - 20 mm using the most modern CNC-controlled systems, multi-slide machines and self-made. Bulk wire articles according to samples or drawings. We use steel, stainless steels, spring steels, non-ferrous metals and alloys as raw materials. From disposable items to 3-dimensional designers - bent parts. From prototype construction to small series to large series. Leg, tension and compression springs. Robot welding parts MIG-MAG-TIG. Spot, projection, stud and butt welding. We punch, press, punch, calibrate on various mechanical and hydraulic Pressing 5 tons. up to 600 tons. Printing performance. Fast moving and deep drawing presses Hanging and painting hooks. Bucket and carry handle. CNC long turned and milled parts up to Ø 16.0 x 4,000 mm Processing such as drilling, milling, thread rolling, wobble riveting, chamfering, butting. Assembly of assemblies, 100% tests, special packaging and handling systems. Own tool shop. External surface processing such as blasting, pickling, anodizing, coating, gold plating, chrome plating, galvanize, KTL coating. Procurement of laser parts and laser welding through our partner companies. Punching and Deep-drawn parts from 0.1 - 5.0 mm sheet thickness and 300 mm sheet width.

Hieselaar is a full-service metalworking company that helps clients worldwide achieve their ambitions. We have been doing this since 1976, with a team of nearly 130 dedicated professionals. We love to develop together with you. From idea to advice. From prototype to series production. Thanks to short lines of communication, we come up with smart solutions together. Flexibility, customization, and clear communication are always at the forefront. We believe that our connection with you makes the difference. Laser cutting, punching, bending, tube laser cutting, (robot) welding, powder coating, assembly, and more.

Welcome to Paun Parts, your dedicated global sourcing partner with our sales headquarters based in Stockholm, Sweden. We specialize in providing customized hardware solutions for startups worldwide.Whether you're at the initial stages of your journey or scaling up your operations we're here to support you every step of the way – from prototyping to mass production.Paun Parts is a global sourcing company specializing in manufacturing solutions of high-quality mechanical components crafted from metal and plastic.With partner factories strategically located in Europe and Asia we harness a diverse range of manufacturing solutions to meet your specific requirements. Let Paun Parts simplify your hardware procurement process allowing you to focus on what truly matters – innovation and growth. Partner with us today and elevate your startup to new heights in today's fiercely competitive landscape.

Torneria Montesi has been operating since 1964 as a trusted partner in the subcontracting of mechanical components in numerous industrial sectors. We are a company that produces custom-made components and standard products for our catalog using mechanical turning and rolling processes. The surface is organized on two production divisions in which the machine tools dedicated to turning and rolled threading are coordinated. To support there are two logistic units dedicated to the warehouse and distribution. Safe, organized and controlled environments reflect their own order on the work of collaborators, guaranteeing precision and punctuality. We are specialized in proposing innovative techniques and appropriate solutions for the creation of each single component. Our strength: The synergy between technological areas: turning and cold forming are in close contact to integrate into the efficiency of production but also to become complementary to each other in the production challenges of qualitative excellence. The synergy between production logics: custom-made products made to design with lean and kanban philosophy intersect with standardized products stored in the warehouse and offered for industrial distribution. The synergy between product logics: customized products inspire evolutions and improvements of our standard products. Synergy with customers and suppliers: from our customers we look for challenges that can allow us to grow, from our suppliers we obtain increasingly targeted solutions. The synergy between our people: we all have room for improvement and the first opportunity to obtain it is the sharing and comparison of knowledge within us.

The J. van Walraven BV was founded in 1942 and is a privately held company. We develop, produce and distribute innovative fastening, fire protection and plumbing systems. Currently, the Walraven Group consists of the holding company and 18 other subsidiaries. Organization of the group Product systems Our range is clearly divided into three areas: BIS fastening systems And much more fixing materials for heating, ventilation and sanitary installations as well as for sprinkler pipes, air ducts, electrical cables, cable trays BIS Fire Protection Systems Solutions for fire resistant and smoke gas-tight sealing of pipe and cable penetrations. As well as fire protection certified support products. BIS Sanitary Systems Sanitary pretext frame for fixing of toilet bowls, urinals and washbasins. Special BIS Vario ®: Electric or mechanical height adjustment! Ultimately Sanitary Silicones and Sealants ... Distribution In Europe, and particularly in Germany Walraven has a huge market share in the attachment area.Walraven products are used by thousands of installation companies in Europe, America, Asia, Australia and the Middle East. Safe Connection Walraven is one of the founders and member of the 'European Quality Association for pipe mounting eV' (safe connection). The composite consisting of numerous major manufacturers of Pipe fixing market, has established comparable, transparent policies regarding the testing procedures of load values. Advantage for planners and craftsmen: a more reliable and easier planning. The 'Quality Association pipe fixing' was 2003 eV from the "RAL", the German Institute for Quality Assurance and Certification, recognized. Quality labeling J. van Walraven Holding BV is ISO 9001; 2000 certified Production After 71 years of experience in the production of pipe fastening systems, Walraven can look at a tool and machine park, which is located at the highest technical level, and thus allows absolutely competitive production processes.. Production includes cutting, shaping and cutting of sheet metal and metals. A fully automated rail manufacturing to galvanizing and automatic packaging. Bzgl. Metal Stamping: Here we have more than 30 different presses with different benefits (force values 45-130 tons and speed between 20 and 150 ejections per minute). Ultimately Walraven can look back with pride on its own and full grown continuously tool shop, so that developments always even, safe and fast can be implemented.

R.Biemme-Tech was a manufacturer of powder metal structural components. Our main products: structural parts, gear wheel, piston, plug and so on. The strength of its business philosophy, is the ideal partner for development of OEM applications, offering functional solutions, which optimize the total product of the customer. R.Biemme-Tech strongly believes that the productivity boost based on the industrialization of products, is the new frontier of the future in the mechanical field. R.Biemme-Tech has now become a real partner for the development of experimental components and analysis of construction problems, achieving high performance in powder metallurgy and an adequate price / quality ratio. Qualified technical staff will follow the customer during the study, prototyping and commissioning of industrial product. R.Biemme-Tech has as main objective the satisfaction of the customer in every aspect and detail, addressing the different needs, both in economic and technological. R.Biemme-Tech offers its customers: - Service, Design and Codesign - Absolute Transparency Service - Total Service Guarantee Strength and pride of R.Biemme-Tech is the ability of engineering, providing solutions before products. R.Biemme-Tech is responsable for: - perform functional design of complex systems, not strictly related to powder metallurgy - carry out the verification of resistance and structural calculations for the preliminary study of the reliability of the product - industrialize the components and process

With the help of modern CNC lathes and machining centers, we meet all requirements for the end product. In addition to the processing of large and medium-sized series, we also specialize in the processing of small series and the fast production of individual parts and prototypes. We manufacture turned parts up to a maximum diameter of 900 mm and work in a milling area of 1,000 x 600 x 600. The clamping fixtures required for production are manufactured in our own fixture construction and are therefore precisely tailored to the production conditions.

We are a specialist company for mechanics and metal construction technology in Schwandorf in the Upper Palatinate.

The company LWF Lang GmbH was founded in 1987. With our team of highly qualified employees and constantly on the latest machines installed in the park, we were able to become a competent Partners in many industries develop. The latest CNC machines allow us to manufacture high precision. Our parts range from small parts up to 3 m wide milling and turning parts. Our range of services includes: Machining: turning, milling, grinding, drilling Delivery of turned parts up to a length of 3000 mm and a diameter of 980 mm milled parts up to 2600x1000x1000 mm. Welding: Repair and installation: Welding parts: with certified welders according to EN 287-1 Spare parts: according to sample or drawing Series parts: as desired, also with storage with us Special jigs and fixtures: according to drawing, but without construction Mondays: in pneumatics, hydraulics, electrics Overhauls: used machines The company LWF machines and special industrial equipment is a customer-oriented company. We have imposed the obligation to fulfill by constant, continuous improvement of our quality management system, the future needs, expectations and desires of our customers as part of our material, human and financial resources with the best possible quality. We see ourselves as partners with our customers and are interested in their success. The declared objective of our quality policy is to achieve a comprehensive customer satisfaction through: - Product quality, which reflects the agreements reached full. - Compliance with the agreed delivery times and high delivery reliability

The main sphere of business is a production of the assembled configurations with various numbers of parts accordingly to the technical documentation delivered by customers. The company owns the proper technology placed on the production area of 3600 m². The technology provides the possibility to machine the large sized objects as well. (Max. sizes: 5000 x 2500 x 2200 mm, the mass up to 10 tons). The achievable precision is IT7. The welding workshop is equipped with modern welding technology.

Professional, competent and responsible team, who is ready to work to provide our clients with the best solution for their needs. Long-term expierence in manufacturing of metal products and successfully implemented projects allow us to alledge that we are able to produce initially even not conceivable articles. Our production equipment, convenient location and professional skills of employees are the key to successfully implemented orders and thankful clients.

As a master-run cutting company from Geesthacht, near Hamburg, specializing in the process of water jet technology, we cut a wide variety of materials for you. Whether according to a sketch or sample - our experienced designers bring your wishes from paper to production. Contract and series production, individual parts or prototypes - we are flexible for you as Your service provider in northern Germany. Would you like a combined production of your components? We offer you a complete package of services from a single source.

Your creative partner in sheet metal processing! The company Heinrich Horstmann GmbH & Co. KG manufactures for more than 15 years for the industry and the craft. Products: • cabins • Folded profiles • Laser Cutting • Housing for gauges • Complete housing • machine covers • covering and protective hoods • Housing for medical devices • Flashings • Laser parts • Modules • Building Our customers include: • Electronics Company • Computer Manufacturers • Stamping and toolmakers • Machine and plant engineering • suppliers to the automotive industry • Suppliers of the shipbuilding industry • metal processors of different industries • craft enterprises in various sectors Upon request we offer the complete assembly manufacturing including surface treatment such as the galvanic zinc plating and wet or powder coating. In addition, the assembly completed and assembled be.