Portrait of the company Felker Drehtechnik The company Felker rotation technique was founded by Mr. Gerhard Felker and his wife Verica Felker as a pure contract manufacturing companies in D-89610 Oberdischingen in December 2004. The range consists mainly in the manufacture of automatic lathe parts (valve seats, valve pistons, valves, anchors, piston, pin, spring plate, lathe parts, micro turned parts, micro-turning), made of steel such as 9S Mn Pb 28K, 16 Mn Cr5 C 45, 42 Cr Mo4 Stainless steel to 1.4301, 1.4305, 1.4105 (X6Cr Mo S17), cast iron, aluminum (Al Mg Si) and brass (to Zn 39 Pb) on 9 Tornos AS 14 six-spindle automatic lathes up to Ø 14 and an additional plastic on a Star lathes up to Ø 16 in Central series and large series from a lot size of 20,000 or 5,000 units at long lathe. Besides this installation work, Nachdreharbeiten and Deburring and Aussuch or testing work of rotary parts of all kinds are carried out. Our strength lies in the flexibility of the company.An absolutely smooth cooperation among the employees as well as with senior management and the customer ensures virtually zero defect deliveries. We endeavor to expand and consolidate its above-average quality, our previous successful and trusting relationship with our customers. Our goal is to provide systematic improvement in quality and on time delivery to satisfy the customer and implement its requirements given us 100% error-free and at a reasonable cost. We are certified according to DIN EN ISO 9001:2000 and reject ourselves to the standard DIN ISO TS 16949. Be able to work more efficiently in addition to three of these aircraft were purchased, which have been found in our new premises good place. The new building has a production area with warehouse and office of approximately 1000 m², as well as buildings for more than one employee / inside of about 170 m².

Quality is our primary objective in the development, manufacturing, servicing and tuning of high performance engines including test runs, CNC machining of precision components for racing, mechanical engineering and aviation.

ANG has decades of experience in the production of mechanical parts for Luxembourg industry and the greater region, as well as for private customers. The mechanical workshop has been able to increase its quality, reactivity and service over the generations. The satisfaction of our customers remains our primary objective. We reproduce complete parts from models or drawings. Often a mechanical part requires heat treatment. We also provide surface and heat treatment of high value-added parts.

Büttner CNC - production technology We produce milling and turning parts on CNC machining centers. We are 4 vertical and 2 5-axis machining centers. We manufacture engineers, vehicle, Medezintechnik and laboratory technology. Our company has 14 employees We are certified according to DIN EN ISO 9001:2008.

For more than 45 years we have worked successfully as a tool, fixture and contract manufacturer for renowned national clients. Our qualified staff of 16, modern machinery and certified management systems guarantee for efficiency, quality and delivery reliability. We mill to max. 1350x400x400mm and 1 to 8 weight on CNC machining centers and 2 conventional milling machines, turning to 8 CNC lathes up to 1 Ø880x1600mm and weight. Using the latest CNC technology and CAD CAM systems the greatest possible cost with the highest quality and short delivery times will be agreed. With the 5 and 4 axis machining centers with up to 18000 U / min milling of complex contours is possible. The 4-axis mill-turn produce turned parts including milling in one setup with maximum productivity. For the tool and our CNC EDM machine is optimal with 8-fold electrode changer. We also have 2 round and 1 flat grinding machine, three conventional lathes, 2 conventional milling tool, one conventional EDM machines, measuring machines, Zett measuring 6-articulated arm and many other drills, hand tools, etc.

Pastorelli Zerspanung is a small entrepreneurial company that was founded in 2016 and is now establishing itself in the contract manufacturing market.

We are your partner for CNC turning and milling parts in single and small batch production Established in 1995, we finished with 20 employees now on modern CNC milling and turning machines parts for the equipment, special machines and machine tools, as well as for the pure toolmaking. Furthermore, we have the opportunity in your own account home welded assemblies to manufacture and Perform assembly work for engineering groups. About our cooperation partners, we cover the whole range of further processing (Flat, cylindrical grinding, surface coatings, hardening, EDM, laser and water- radiating parts, etc.). The following machines at our disposal for the production are available: - DMU 80T - DMU 50T - Hurco BMC30 - Hurco VMX 40 - Hurco VMX 42 - Hurco VMX 42 SR - CTX 310 - CTX 410 with bar feeder - NEF 320 - Various conventional machines - Bandsägeautomat HA 250 from AMADA - Welding Technology Our customer base comprises approximately 60 customers throughout Germany.

The predecessor of the company was founded in 1956 and now acts as Fazekas GmbH. To meet the market needs, we asked ourselves from the solution of the general problems in the service of the population in the production of spare parts and tools, the repair of industrial machinery, equipment meant um.Die modernize our machinery is an important step forward in the quality and also the quantity of manufactured products rose considerably. Parallel to the investments we introduced the quality control system ISO 9001, which we use today with success. Recently we expanded our field of activity with the planning of single-purpose machines and tools as well as 3D processing. Every year we spend expenses for development and learning about the latest technologies. Under our current plans, the establishment of a branch is at a European level, so that we can serve our customers quickly and very accurately. Our goal is to have a growth rate on faster and more stable base, the more satisfied customers among our partners.

Company Innoflex has as start-up companies a CNC woodworking machine and two gypsum-cardboard Frese machinery We, currently have spare capacity for series production in the field of wood and gypsum-cardboard panels-Verarbeitung.Unseren future customers we provide now a timely, competent and reliable production about.

Dutch Valley International has a network of 25 companies in India that can offer high precision turning and milling. In addition, die-cast aluminum and the forming work. We can also deliver sheet metal composite parts in high quality. We also provide the surface treatment such as galvanizing, quenching, coating powder etc. etc. We accompany quote request to delivery free domicile. For more information on www.dutchvalleyinternational.com Or call 0031651939988

Güneş Makina Ltd. Şti. has been founded in 1981 to manufacture automotive spare parts in Istanbul. It has been served domestic and foreign companies within years. Some areas we have already worked/served in years; · White Good/Heating-Cooling Industries · Machine Accessories · Automotive · Hydrolic/Pneumatic Equipments · Medical Turning We can machine 2mm up to 320mm parts in different raw materilas. · Free Mild Steels · Carbon Steels · Stainless Steels · Copper Alloys/Brass · Aluminum · Thermo Plastics · Carbon Fiber · Tool Steels

We are your experts in Welding and Structural Steelwork and offer you over 10 years’ experience in the Machinery and Steel Fabrication sector. As premium members on Techpilot, we are looking for longterm partnerships in the steel industry. Our key to success is our flexibility, credibility, and reliability to focus on high-quality parts that are cost-effective and always delivered on time. Our core competencies are: - Welding - Machining - Laser Cutting - Project Management We welcome all kinds of orders, from small to large quantities and parts for serial production, the welding of any kind of construction or machinery and the assistance with technical questions related to turning, milling and machining. Our services begin from the first stage and end in the final location. Our production is guaranteed, and our services extend after delivery with excellent customer service. We’re located in Alytus, Lithuania, and in co-operation with companies in Scandinavia, Russia, Germany, Netherlands. Our success lies in good relationships with shipping companies that we are working with to provide you with the most competitive prices worldwide. We do this work because it is our passion, and it is what we love: ‘making the impossible, possible.’ We strive to give you the customer satisfaction you deserve, especially in an industry of challenging and unpredictable demands and conditions.

BME is the global specialist for high-quality components and engineering solutions. With our solutions for special parts according to drawings, we have positioned ourselves as a quality supplier in high-growth markets. In addition to the production of standard parts, we are specialists in the production of parts and assemblies according to customer drawings. Our core business is divided into the following areas: ■ Dowel pins, axes and shafts according to drawings ■ Cylinders according to DIN and ISO We ensure quality and environmental requirements with our integrated management systems. Due to increasing customer requirements, we are also constantly developing our quality standards. Our production processes: ■ Turning - drilling - knurling ■ Cut thread, drill thread ■ With surfaces (ground or milled) ■ Centerless cylindrical grinding ■ Surface grinding and plunge grinding

We are UNISPECIAL S.r.l. – Turing Center Company with over 30 years of turning, milling and machining expertise, located in Vigodarzere, Padua County, in one of the main industrial regions of Italy: Veneto. We are a team of 25 people and operate with a continuously updated machine park of 28 numeric control machine tools, including: - sliding head CNC lathes with bar passages of ø18, ø20, ø25, and ø40 mm - CNC lathes with spindle, counter-spindle and Y axis, with bar passages of up to ø80 mm - twin spindle, twin turret lathes. - 3 and 4 axis work centres capable of machining volumes of 1200x800x800. What we do Our main activity is the production of machined parts, turned and milled parts to drawing in ferrous and nonferrous material: - Small precision parts between Ø2 mm and Ø40 mm as well as very long precision parts up to 3600/3700 mm long – our core business - Machined parts turned and milled from bars up to Ø80 mm - Production of secondary turned parts up to Ø300 mm from slugs or castings Other in-house processes: - thread tapping and rolling - laser marking - keyway slotting - broaching Quality control: - Mitutoyo three-dimensional measuring machine, - computerised profile projector, - surface roughness meter - hardness meter. - PPAP and SPC We can machine all ferrous and non-ferrous materials in rolled, extruded and ground bar stock (including high speed steel, C 35 Pb, C40/45, AISI 303, 304 and 316 stainless steels, steel alloys, titanium, brass, bronze, aluminium and plastics). How we do it Requests for offers are processed within 24 hours as part of our standard operating procedures. Provided the necessary materials are readily available, orders are normally delivered within one to two working weeks, depending on the complexity of the product involved (unless special machining operations have to be performed externally). Furthermore Exports currently account for 15% of Unispecial’s sales. Germany is - and has been for many years now- our main export market, followed by Netherlands, Sweden, Denmark and Austria. Our main domestic market is central and northern Italy. Last year turnover: 2 060 00,00 € Our company’s flexibility in terms of production potential (lot size) represents an important added value. We interpret flexibility in terms of optimised production management, increased production efficiency and greater capacity to satisfy customer requests. Our flexible production system and the large number of machining operations we can perform enable us to produce an extensive range of parts for areas of industry with widely differing needs. We can supply from the smallest to the largest finished products, all accurately machined and guaranteed to ensure total satisfaction of customer needs, including conformity to all specified dimensions and characteristics. Constant investment in process technology and organisation has allowed us to achieve excellent levels of efficiency and productivity. The dedicated software we use to control our entire production process enables us to implement statistical, sample based, or complete lot quality controls meant to suit customers’ requirements: SPC and PPAP Our customers can rely on a flexible and rapid supply chain (logistics and storage). Our warehousing system can interface effectively with customers’ re-ordering systems. Unispecial’s strengths include rapid order processing, competitive prices, a particularly advanced machine park and flexible production. Certifications Our Quality Management System is certified to ISO 9001:2015

FMM.GmbH was founded in 2019 to establish reliability in contract manufacturing as the standard. Since then, our customers have no longer had any problems using the workpieces on time. For you, we have specialized in the production of individual parts. So you get a fair price-performance ratio.

Dear Sir or Madam, We are your partner - from the idea to the finished product. Whether for CNC parts, CNC laser marking, CNC plasma cutting or revisions of machines, we are your contact. We rely on close cooperation with the customer and offer reliability and top service. We would be very happy to receive an inquiry. Visit us on our new homepage www.hekuro.ch

We manufacture precision turned parts for every area of application - from simple turned products to complex workpieces with complex shapes and contours in medium and large series. In addition to turning, milling and drilling, we take care of all the finishing work. You receive ready-to-install workpieces from a single source, perfect down to the last touch. Our certified quality management guarantees the highest quality at every stage of production. We supply customers from various industries with our wide range of turned parts

UP MAKINE, active in defense industry at United States, Europe and Australia, is a project management company that is highly capable of creating result-oriented solutions based on requests in a wide range of manufacturing projects. We’re a focused and dedicated force, ready to partner and build solutions. We strive to exceed our customers’ ever-changing needs. Our military supply chain management is an integrated cross-functional approach to procuring, manufacturing and delivering goods and services for our customers. If you are as eager for this cooperation as we are, please feel free to contact us. As Up Makine, we are struggling with very complex military products which have many operations from the procurement of material through the delivery to your warehouse. This pushes us to plan every steps in detail, to make sure your orders are fulölled most efficiently, without interruptions, delay, or stress. We start working on project when it örst reaches us for a quotation. We consider all possible difficulties we may face in every stage, thus we are fully ready when we get the order, and following this procedure enables us to provide reliable lead-times and fast service. The willingness to make sacriöces and work harder in the name of mutual beneöt is one of the things our clients appreciate, and that they say sets us apart. Whether you’re looking for specs, data sheets, quality reports and certifications, we pride ourselves on providing a high level of customer service day in and day out. It is our commitment to quote within 3 days, regardless of production quantity. Submitting a quote is not for a fee, since it is great pleasure for us to work on your project. In addition to using top-quality materials and equipment, we conduct quality control checks at all stages of the manufacturing process. We provide a product report including material, coating and heat treatment certificates and other dimensional and measurement report. Packaging requires attention to detail in contract execution. When working with Up Makine and our experienced team, you receive subject matter expertise in all areas of packaging. The company’s mission is to grow and expand with strong and unique strategic partnerships all over the world. We are looking to hear from you for a new collaboration. Kind Regards, Alper USLU Founder / Mechanical Engineer Up Makine

Plastosteel d.o.o. is a family-owned Slovenian company specialized in precision machining, welding, and mechanical assembly of metal, plastic, and other technical materials. With roots dating back to 1999, our company has grown from a small workshop into a reliable and flexible production partner. In 2021, we transformed into Plastosteel d.o.o., and in 2022, we moved into new production facilities and expanded our machine park. We support our customers with: CNC turning, milling, and grinding MIG and TIG welding Mechanical, pneumatic, and hydraulic assembly CAD development, reverse engineering, and custom construction Coordination of heat and surface treatments through trusted partners We are capable of handling single-part production, technical prototypes, and series manufacturing – with a strong focus on customized, high-precision components. Our small, highly skilled team combines speed, precision, and personal commitment, making us an ideal partner for demanding and fast-paced projects. We are currently in the process of obtaining ISO 9001 certification to further strengthen our quality assurance. We are open to new collaborations across Europe and ready to support customers in various industries – from mechanical engineering to automotive and equipment manufacturing.

Kovovyroba Kralicek s.r.o. is a family‑owned job shop founded in 1993. With 5 modern CNC turning centres (Ø 320 × 600 mm) and a CNC milling centre XYZ RMX 5000 (X 1 000 × Y 400 × Z 500 mm) we machine steel, stainless, aluminium, brass and plastics to ±0.01 mm. TIG / MAG welding up to 5 t, assembly and surface treatment are carried out in‑house. Quality is verified on a Baty optical projector and 3‑axis CMM; material certificates and inspection reports can be supplied on request. Typical lead time is 5–10 days and quotations are issued within 24 h. We supply precision shafts, flanges, frames and custom parts for packaging, medical, logistics and agricultural machinery.