The experience of our designers guaranteeing customers the most appropriate solutions, the high specialisation of our technical staff, the use of the most advanced production technologies and the use of the best steels are the conditions that determine the excellent quality of our products and the competitiveness of our prices. A large stock of semi-finished products, the use of flexible processing cycles, a privileged and collaborative relationship with historical suppliers of steels and consumables, allows us to supplying the customer in a very timely manner. Always direct contact between our Customer Service and the customer, frequent visits to the operating sites, necessary to get to know better the real production requirements and to suggest the appropriate solutions, the awareness and willingness to put our more than fifty years of experience at the customer's disposal are the conditions that allow us to offer our customers a service excellence.

Company description Looking the whole manufacturing from a single source? Put on the right partner, because it gives you the necessary freedom for your core business. Send us your drawing. We procure materials, rework the parts, ensure the coating and monitor the entire production process until you can use the pre-finished workpiece on time available. Mcon GmbH (Austria) has specialized as a supplier of high-quality production parts. With years of experience in mechanical engineering, we were able to establish ourselves very well in the domestic and European market. Our strengths are high quality associated with punctuality, expertise on our part as well as those of our contractors. With this basis, we like to solve your challenges! OUR SKILLS We put our focus on products that we have been perfecting. In order to offer our customers perfect products, we focus on the following areas of expertise: • Frästeile • Turned parts • weldments Especially in the mechanical engineering, plant engineering, transmission engineering, railway and traffic systems, renewable energy and medical customers appreciate our expertise, as well as the perfectly manufactured products and the fast service. Frästeile: Quantities: Small, medium and large series Dimension: Max. 500 x 1200 mm Material: Steel, stainless steel, nonferrous metals, plastics surface treatment Curing, painting, nitration, anodizing, coating, Brin Irish. Turned parts: Quantities: Small, medium and large series Dimension: Conventional machining: max. D = 220mm Material: Steel, stainless steel, nonferrous metals, plastics Surface treatment: possible in cooperation with long-standing and reliable partners Welding: Quantities: Small series Weight: Max. 3000 kg Material: Steel, stainless steel Welding Types: After method E111, TIG / 141, MIG / 131, MAG135 / 136 Welders have valid certificates according to EN 287/1 Surface treatment: possible in cooperation with long-time partners. Surface treatment: anodizing Chromium Blacking paint galvanize Wärmebechandlung: gas nitriding vacuum hardening are also possible on request quality responsibility "The customer comes back, not the product" So simple and clear aptly is our internal motto. Achieving this does not succeed by means of regulations, but only by really motivated and well trained staff. So is the ultimate goal for us to provide a secure future for employees and company. We intend to achieve by careful and constant growth of the company and by absolute customer satisfaction. Challenge us with your requests!

Small engineering company with its own design department.

We are a component supplier that provides the following services and deliverables: METAL TECHNOLOGY CNC turning & milling, welding, laser engineering, edging, punching, surface engineering PLASTIC TECHNOLOGY CNC turning & milling, welding, vacuumforming, clean-room and laboratory technology, plant engineering Our unique vertical integration, for instance in plant and mechanical engineering, allows us to manufacture everything in-house, from the base body with a metal-rack to the complete pipe work and electrical equipment, and to respond to our customers’ wishes with great speed and flexibility to ensure a maximum degree of quality, also for complex constructions.

As a contract manufacturing operation in the field of CNC machining, we are equipped with the latest CNC machines and measuring instruments. The company focuses on precision machined parts, in the area of 5-axis simultaneous machining. Production is in the numbers 1-10000, that we are moving in the typical one-off production, prototypes to small batch production. We finished with the claim precision in manufacturing in mechanical engineering, plant engineering, medical, pharmaceutical, chemical, aerospace, tooling, IT industry, defense, electronics, automotive, fuel cell research and work with various research institutes together. As a contract manufacturer, we also offer ultrasound-assisted milling (Ultrasonic). We ((Aluoxid), tungsten carbide, zirconia, carbides, nitrides, etc., such as glass, ceramic) is milled with diamond tools in the so called Advanced Materials. So far we have the following materials processed in the hard state as: Pane glass, Zerodur, variousHard metals, ceramics (Aluoxid Al2O3), zirconia, silicon carbide, silicon nitride, marble stone, granite, boron carbide, Syalon. In these materials, we also bring in thread from size M3. We offer the following performance profile: - Extended workbench - System Supplier - Technology Supplier - Milling with HSC - Milling with vacuum clamping technology - Mehrachsfräsen (5-axis-simul.) - CAD / CAM workstations (all CAD interfaces) - Wage measuring tactile until cubic 500mm, optical up to 300mm; accuracy jew 1.8 microns - Certification to DIN ISO EN 9001:2000 - Graphite machining - Ultrasonic machining With our employees - all skilled workers and almost all of their own offspring - we will work on our machines all materials such as steel, stainless steel, aluminum, plastic, graphite, Ampco, Kovar, titanium. With our already 20 years of activity, we can draw on a wealth of experience and know-how. Our customers include large-scale industry and medium-sized businesses and small craft.

SPANPOWER CNC Precision Parts is the manufacturing specialist for high-quality CNC-manufactured components and assemblies. With our modern machinery, we produce prototypes and series. Our services include CNC turning and milling and wire EDM. Customer-specific surface treatments and module assembly round off our manufacturing options. Our customers come from the fields of plant engineering, mechanical engineering, optics, automotive and aerospace.

Metallbau Müller GmbH About us: Metallbau Müller GmbH is a medium-sized company that has been active in the metal construction industry for over 10 years. Our company consists of a highly qualified team of three experienced employees who specialize in tailor-made solutions for private and commercial customers. Our services: Design and production: We offer individual planning and manufacturing of metal structures such as stairs, railings, balconies, window and door frames. Assembly: Our team performs professional assembly work to ensure that every project meets the highest standards. Maintenance and repair: We service and repair existing metal structures to ensure their durability and safety. Our philosophy: At Metallbau Lars Dietze, quality is paramount. We place great value on precise craftsmanship, reliable adherence to deadlines and close cooperation with our customers. Our philosophy is based on sustainability and environmental awareness, which is why we rely on high-quality, durable materials and use resources sparingly.

Microniq Ltd.-From design to production! Our company's main activity is the manufacture and development of custom and mass-produced components, machine elements, design, manufacture and on-site installation of devices. We try to fill our spare capacities by contract manufacturing. We are innovative, creative, precise and highly flexible!

Company founded in 2021. Milling and turning capabilities. Especially machining of aluminium, brass, stainless steel and technical plastics.

The production of a die follows a long process: it starts with the conception of the object, moving through a process simulation aimed at studying the stamping method. Once agreed upon with the client based on production volumes and the designated presses, the design phase begins, which M.C.S. prides itself on for its precision. The manufacturing of the equipment is then immediately undertaken, coordinated by a thorough analysis of the process. M.C.S. also manufactures dies based on designs provided by the client, as is common in the automotive sector. M.C.S. specializes in the construction of dies for the automotive and home appliance sectors, but any sheet metal part can be produced by our team. You design a sheet metal product, and we will manufacture it for you. We handle single-stroke dies, progressive dies, and transfer dies, cooperating to fine-tune the part handling process. Our production flexibility enables us to engage in automatic production of both small and large series of parts with dimensions up to 3 meters, as well as in low-volume production using manual recovery dies. We rely on a team of highly skilled and experienced professionals in the field. One of M.C.S.'s unique characteristics is its advanced processing technology, which keeps the company at the forefront of the industry and ensures very high-quality standards Progressive dies:Our most innovative target Transfer dies:We aim to be a comprehensive partner, assisting the client throughout the entire process until production launch Prototype dies:When time constraints challenge us, prototype tools allow for rapid production and/or enable refinement of the stamping methodology study Milling and subcontracted mechanical processing:With our machinery and flexibility, we enthusiastically embrace the timing and technological challenges presented by the market. We have experience in the petrochemical valve sector, metalworking, and complex mechanical components AUTOMOTIVE INDUSTRY Molds for chassis framework and interior body panels Molds for reinforcement brackets, window lift guides, flanges, and mufflers Molds for components of any type Molds for thick sheet metal Molds for heat shields, including those made of aluminum MILLING MACHINE DEPARTMENT The milling machine data is summarized as follows : 3 x 3-axis milling machines with 5-face machining capability, 3000x2200 mm (10,000 rpm) 3 x 5-axis milling machines with a working area of 1750 x 1400 mm (18,000 rpm) 1 x Okuma milling machine for machining hardened steel and superfine finishes (15,000 rpm) 8 x CNC milling machines for parts up to 1600x1200 mm EDM DEPARTMENT The EDM data is summarized as follows: SODICK AQ400L SODICK AQ600L 2 MITSUBISHI MV2400R ONA BIHLER automation for the production of structural elements with steel, aluminum, copper elements

We are the German sales company of the KUAN YI Group. The company was founded in Taiwan in 1989 and today consists of 7 production sites with over 2,000 production machines and 1,200 employees in Asia. We take care of customs clearance and fast delivery within a few days from our production sites.

High product quality, consistent focus on quality, motivated personnel, efficient operations: These guidelines characterize our company! So we could since the company was founded on 1.8.1998 expand our production capabilities continuously and finished today in modern office and production buildings of 3,000 sqm in 3 layers. Our quality management system according to DIN EN ISO 9001:2008 ensures our customers process safety and impeccable product quality. And for many of our customers is the incoming inspection of long past!

Turning and milling for recovering products.

HSP Schwahlen GmbH was founded in 1945. From on 1951 the production had been focused on adapter and withdrawal sleeves being the basis of our current line. At the beginning of the eighties CNC production of goods having greater dimensions was introduced. HSP supplies all main bearing manufacturers as well as the larger distributors. The standard production range on adapter and withdrawal sleeves, nuts and locking devices is completed by optional hydraulic assistance, abnormal metric inner diameter or complete inch-sized sleeves as well as all specialties based on customer specifications. Besides this we manufacture hydraulic nuts as well as precisely turned and milled thin-walled parts. Since 2000 HSP is also manufacturing various kinds of cages for bearings from 100 - 4000 mm outer diameter in high quality, small lot sizes and variable material (brass, steel, bronze, aluminium, ...) according to customers requirements. In this segment we produce for all main bearing manufacturers. In addition to the production know-how HSP has continuously improved quality, logistics and administration. This leads to the high level of quality, delivery conditions and service of HSP. At our newly built production facility in Langenfeld, established in 2001 and in between extended several times, we manufacture with the latest technology including 3D-measuring equipment. The certification of the quality management system based on DIN EN ISO 9001 and of the environmental management system based on DIN EN ISO 14001 by Lloyd's Register Quality Assurance Limited underlines the endeavour to achieve highest possible precision and satisfaction of our customers as well as the best possible environmental sustainability. HSP product range The HSP production programme covers adapter and withdrawal sleeves, nuts and locking devices with 130 mm up to 3000 mm outer diameter and approx. 600 mm in length. Besides the standard we offer the following: • Sleeves with abnormal bores and threads, metric / inch dimensions, special materials, ... • Production according to customer specification respectively to drawings • Special surface treatment (e.g. phosphating) • Longterm packaging • Direct deliveries, global sourcing and other logistical add ons Standards of the HSP production • Adapter sleeves according to ISO 2982-1:1995 (-> DIN 5415:2009-05) • Withdrawal sleeves acc. to ISO 2982-1:1995 (-> DIN 5416:2009-05) • Nuts following ISO 2982-2:2001 (DIN 981:2009-05) • Locking devices acc. to DIN 5406 • Any standard or recommendation of customers by drawing or text Additional products Cages for bearings with complex milling and drilling processes up to 1750 mm outer diameter processed in five axis. HSP is not limited to any design according to customer requirements. Most ferrous material can be machined (brass, bronze, steel, aluminium, etc.).

Ottani Meccanica represents more than 50 years ago small high precision parts. The company has grown over the years and has specialized until receipt of the current structure, which is structured as follows: HEADQUARTERS and WORK 1: Here are a machine park of 50 lathes (the cam-controlled single-spindle, movable CNC headstock machine, cam-controlled and CNC Mehrspindeldrehautomaten- including a INDEX MS-40 C - includes) the mechanical machining of precision rotating on a covered area of over 4000 m² made. FACTORY 2: this is just a few meters from the headquarters and extends over a covered area of 800 m², dedicated to the assembly of tested and packaged according to individual customer requirements sub-units and / or finished units.

Founded with the main purpose of manufacturing automat components, our company is capable of mass production of the automat parts of automotive supply industry, durable consumer goods and household appliances. Our production has the international standarts and is certified with related quality certificates. Since the year 1988, we have been producing ; -Automotive & Machining Industrial Spare Parts -Natural Gas Fittings -Connectors for Medical Devices -Combi Boiler and Radiator Fittings -Lighting Industry Parts -Furniture Accesories... With its expanding production capacity, including c-axis CNC automat, renewed workbench park and completely digital computer assisted sensitive scale units; our company aims to manufacture faster and more reliable at highest quality.

Designed with a 120-year tradition and produces KELLER HCW machines and Plants for the heavy clay industry as well as special solutions for logistics and handling tasks. Since 2006 KELLER is a division of the French group Legris Industries. Together with the renowned brands Novoceric, Morando undRieter making it the powerful network of companies KELLER, the world's only Offer complete systems from one source can