Pressure die casting of non-ferrous metals (Aluminium and Zink). From 100 to 1750 tons closing power for Aluminium and from 5 to 250 tons closing power for Zink. Small and medium runs.

New dimensions in die-cast aluminum Comprehensive know-how, focused on quality and high level of consulting expertise in the service of customers - these virtues make the market success of ALUWAG AG also as a system provider for over 3 decades. Just find the right solutions and implement the highest quality is our mission. The use of modern material aluminum we open in conjunction with thoughtfully developed die-casting solutions to new dimensions. Starting in the development stage, customers are advised and supportive through the whole process. The intense mutual exchange of thoughts and experiences creates innovations that convince the market - be they individual aluminum die casting parts or entire systems. Partnership and professional customer requirements are successfully implemented. The ALUWAG AG, together with its customers active pioneer in the technical development of aluminum components. The wide range of experience as a leading European business is the basis for all demanding die casting solutions.

Since 1960, our company deals with the production of investment castings. Thanks to their high dimensional accuracy and surface quality investment castings are indispensable to modern manufacturing techniques. This fact gave us in the last few years a rapid development. Approximately 3,500 tons of steel, and aluminum and copper alloys are shed annually at our factory in Riedlingen. Investment castings by the lost wax process in steel, vacuum, aluminum or copper-based alloys, including finish machining, surface finishing and assembly.

G+ K, was founded in 1997 as the German partner of Pace Precision, Singapore. The family takes Europe a technical leading position in the production of die-cast precision components segment. With over 30 years of experience in the development of precision engineering and contributing to more than 70 patents or applications is a versatile and rich experience available. The success reflects the concept fully into account.

With Lambert GmbH to market success by quality, optimum handling and deliver Philosophy: Our goal is to act flexibly through the use of advanced production equipment and innovative ideas and always to attract new customers. Within the long-term cooperation, we distinguish ourselves by reliability, high product standards, technical and quality expertise. With experienced management and skilled employees we provide the continuous improvement of our delivery processes safely. With us, customers are not just customers, but satisfied partners. Market position: In the field of aluminum casting, zinc die casting and aluminum trade, we occupy a prominent market position. For innovative companies, we are the partner of choice. Capabilities and competitive advantages are characterized by the fact that a significant contribution to the easier and safer handling of customer / partner relationships is provided. Through economic stability, we are reliable partner for long-term projects

Our core competence is the production of castings and extrusions made of aluminum with high demands on quality and precision. Cutting-edge technology, designed according to the latest equipment and a motivated team of experienced specialists guarantee an effective and efficient processing of orders. We are certified to ISO 9001, environmental management standard ISO 14001 and automotive standard ISO / TS 16949.

Corporate Vision Buderus Guss GmbH Fine is a customer driven, comprehensive solution provider for geometrically challenging investment casting components with specific material challenges and machining issues. The service offering includes raw castings as components ready for installation including test documentation, mechanical machining, coating and painting. We offer our customers a competitive advantage by short delivery times, intensive development support for new projects and an excellent cost position and the highest product quality.

Gienanth GmbH is an iron foundry producing castings with state-of-the-art manufacturing technology and all the expertise needed. Our 280-year-old history shows where we evolved from – and today our success is based on competence and leading-edge technology. We produce the following cast irons with various material properties: - Lamellar Graphite Iron (LGI) - Spheroidal Graphite Iron (SGI) - Compacted Graphite Iron (CGI) The production capacity exceeds 100,000 tons per year. Our machine moulded castings department manufactures castings with a weight from 0.5kg to 20kg. The hand moulded castings department produces complex castings weighing between 500kg and 5,000kg.

Cutting-edge expertise from Saxony for the development and implementation of system solutions The moving over 600-year history of the company mens it through two world wars and economic crises led the ironworks Erla do today to one of the most efficient and modern jobbing foundries in Germany. Develop in the lavishly renovated factory, produce and finish more than 250 highly specialized employees demanding compliance with all environmental standards Castings in all modern Eisengußwerkstoffen. The Pa- lette ranges from mass-produced Automobilguß to complicated and core-intensive components for mechanical engineering. The production capacity is annually about 21,000 t. Using the latest design and manufacturing technologies is the iron Erla a competent partner interna- tional industrial customers. This provides the use of CAD systems and simulation programs the work Engineering expertise.

MATERIALS spheroidal cast iron EN-GJS-500-7 according to EN 1563:1997 (GGG50 according to DIN 1693), gray cast iron EN-GJL-200 and EN-GJL-250 according to EN 1561:1997 (GG20 and GG25 according to DIN 1691), black heart malleable cast iron EN-GJMB-350-10 according to EN-1562:1997 (GTS 35-10 according to DIN 1692), white cast iron - hardness about 400 HB, pearlitic malleable cast iron: Rm = 420-450 MPa, A3 = 5-7%, hardness 150-200 HB. MOULDING MACHINES half-automatic moulding line Heinrich Wagner SINTO - high pressure air flow squeeze; box size 600x400x130, automatic moulding line DISAMATIC 2013, jolt-squeeze moulding machines: Foromat, FKT: box size from 400x300x110 to 800x700x240, Our technology allows for manufacturing rough castings in accuracy class III according to PN 76-H/89205 (GTB-15 and GTB-16 according to DIN 1686). The level of the Ra parameter which characterizes the quality of the rough casting surface is from 25 to 100 ųm depending on the construction of the casting and the type of shots used for dressing. CORE SHOP "hot-box", "cold-box", shell cores, handmade using oil sand .

Engineering company for product delvelopment and int. project management

We ensure local product support at technical and commercial levels for a group of part suppliers in Asia, Europe and the USA.We provide the following components to companies in Europe: - Castings in grey iron, nodular iron, steel, rough & finish-machined - Diecastings in aluminium and zinc alloys - Permanent mould (gravity) castings - Forgings - Stampings We can take care of all of the details involved in getting the components made for you and shipped to a location of your choice. To start, we require a part drawing, an indication of quanties needed and point of delivery. You will receive a quotation rapidly.

Due to a clear technological competitive edge in the foundry technic, the enterprise Ergocast is always able to offer special mature products to the market. We manufacture gray iron and spheroidal iron pieces up to a piece weight of max. 100 kilogramme in series, which mostly finds usage in the drive engineer technology (e.g. castings for gears and steerings) and hydraulics. That way with our products we make sure, that e.g. an agricultural tractor can provide its full power. Thru the mechanized mouldmaking in the furan resin bonded sand, we manufacture gray iron and spheroidal iron pieces in low volume production from circa 200 kilogramme up to 4,000 kilogramme weight per piece. The models are mounted with ingating system on model sheets. By demoulding the models mechanically, the models are spared and can be used more often. Due to the longer working life, the model costs can be reduced. Materials: Cast iron with flake iron after EN 1561 Cast iron with nodular iron after EN 1563 Special materials after customers request (e.g. GJS-SIM)

The site of Gepforg is in Kóka, in Hungary, which is situated 40kms from Budapest. It was founded in 1990 with the participation of private ownership. The manager and also the owner is: Laczkó Ferenc. The history of our company run back over two decades. As a result of dynamic development, at present this medium-sized company uses an up-to-date CNC machine technology. Gepforg supplies different parts to a number of automobile factory and to their suppliers. We produce a wide range of parts (from air conditioner connector to electric motor houses). In 2003, Gepforg introduced the MSZ EN ISO 9001:2001 quality management system. The company is an accurate and a reliable partner because of the practise of the quality assurance according to the international standard and because of the direct contact with the partners. High-qualified, skilled workers provide that the level of both the products and shipping by Gepforg are internationally acknowledged. Our main activities: - CNC countersink ( turning, milling) - Tool design - Tool fabrication - Assembly of simple and complex parts - Aluminium moulding (chill and pressure moulding) - Winding

Our has the advanced precision casting equipment and the craft, the annual output is above 2000 tons. The product type includes: The pipe-line valve, the mechanical fitting, the vehicle and motor fitting, the power plant boiler, the sports equipment and so on, mainly used in industry demons, the machinery, metallurgy, geology and mining, petroleum, spinning and weaving, automobile, energy and so on. At the same time, our company also may defer to the customer to attempt the request, makes each kind of high accuracy, high surface smooth finish and shape cavity complex casting. At present, our company＇s casting product size precision could be achieved CT4, the surface roughness could be achieved Ra3.2.We can produce all kinds of the casting products between 3 grams to 100 kilograms weight, within 0.5 meter long. The independent heat treatment shop and processes the workshop, can provide the high grade heat treatment and the machining service for each kind of material for the customer. The company also has the spectrometer made in Germany , the HR -150A machine for testing hardness, the impact testing machine , the advanced physics and chemistry laboratory and other check equipment. We strictly guarantee the quality and the sound surface of our products for all customers . Anwendungsbereiche / Einsatzgebiete: Feingussteile, Präzisionsgussteile ...

We are a model making operation from the Hannover Region and took us to the production of prototypes and small series of specialized plastic and aluminum. We offer our customers: tool-oriented design products according to customer specifications for low pressure, injection molding, and Druckgußartikel CAD modeling with Catia V5 Model and prototype Rapid Prototyping Tool and mold for injection molding, - and deep drawing products Mold plastic (Cost-effective tools for small series) Small batch production (1 .. 5000 pcs) Plastics Processing Series production of injection molding and thermoforming articles CNC milling up to 950x650x250 mm wage Our customers include well-known companies from the electrical, medical, automotive supply industry and the engineering industry.

DRUTEC is a specialist company for zinc die casting (customers Protected parts), as well as assembly. Our foundry are connected spatially own tool and an assembly and finishing department. Range of parts: technical + decorative, 2g to 7kg Gießteilgewicht, and vacuum pressure casting for critical and lunkerarme parts. Excellent references available. For more information on the web: www.drutec-druckguss.de or by phone on 0049 (0) 5221-102299-0

Industrial representation for technical moldings-According to your drawings, we provide sophisticated precision parts from prototype to mass production. Technical advice on the development, delivery, quality and competitive prices are our goal. The following products we can offer you: Rotary / milled parts, stamping parts, die casting, gravity die casting, plastic injection molding and forging parts.