Every company works best when all employees are happy to do their job every day and with a great deal of commitment. Just like ours: A well-rehearsed, down-to-earth team, an uncompromising approach to quality and the right mix of experience and youth. We supply ready-to-install components, including the required surfaces and heat treatments, including Empb, CoC, CMM measurement protocols.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Founded in 1985 Certified according to TS 16949:02 Audit according to DIN EN ISO 14001:2005 Technical advice for the development of cost-effective and tool fair injection moulded parts Project management, for each of your products you will have a competent person to turn to in our company Construction of process-safe injection moulding and punching tools on the premises Samples as per PPAP Level 1 to 5 and VDA 6.1 Establishing of initial samples test certificates according to VDA script vol. 2, fig. 3 Own toolmaking in case optimizing is required on your injection moulding tools Favourable auxiliary tools, good pre-series tools, process-safe serial tools and high-quality punching tools Takeover of existing tools is possible 35 Precision injection moulding machines with a locking pressure from 15t to 250t Precision injection moulded parts from 0,01g to 400g Two-component injection moulding Precision plastic parts with insert parts from Germany and Czech Republic Round-injecting of artificial leather High-quality articles with Tampon-Print lettering Cost-effective assembly of modular parts Last but not least, 90 employees who will be reliably working for you

Welcome to EFI CNC Machining & Mould Making - your partner for precision manufacturing from Hanover! We understand the importance of precision and efficiency in the modern manufacturing industry. With our headquarters in Hanover, we are proud to be a leading mold manufacturing company that specializes, among other things, in contract manufacturing for turning and milling. Our strengths: 1. Precision work: With state-of-the-art CNC machines and an experienced team of specialists, we offer precision turning and milling work at the highest level. Every product that leaves our factory floors meets the strictest quality standards. 2. Versatility: Regardless of whether it is custom-made or large series, we adapt flexibly to the requirements of our customers. Our manufacturing capabilities enable us to process a wide range of materials and levels of complexity. 3. Experience and know-how: With years of experience in the industry, our team has the necessary expertise to successfully implement even the most demanding projects. Our services: 1. CNC turning: Precise turning of small to large workpieces max. Ø340. 2. CNC milling: Efficient milling with 3-axis and 5-axis milling machines with maximum accuracy. 3. Quality control: Every manufactured part goes through our quality controls to ensure that it meets the requirements and expectations of our customers. Customer satisfaction is our top priority. Our goal is not only to deliver high-quality products, but also to build long-term partnerships with our customers. We place great value on open communication, reliability and timely deliveries.

We are a medium sized company and have specialized in the areas of tool and mold as well as special purpose machines, jigs and fixtures. You will find our Operational 25 km from Hannover, Neustadt a Rbg .. in the district of Basse. There you will find our experienced team of 65 employees. We offer the following services: Tool and Mould Contract manufacturing in the areas of CNC milling (3/5 axis) and turning  Product Development  Prototyping  2D/3D - Construction  Tools and forms  injection molds  Punching tools and devices  Individual production according to customer specification  Special purpose machines  machinery and equipment including construction  Installation and commissioning on site

We offer you plastic injection molding of the highest quality at fair conditions. In the injection molding process, plastic granules are plasticized and then injected into a mold under high pressure. In this way, plastic parts between 0.1 g and 2500 g can be produced quickly and inexpensively in large, medium and small series. Due to our customers in the automotive and sensor technology industry, our production is designed to guarantee all the highest quality standards. With the help of the most modern processes and technical systems, we guarantee very high dimensional accuracy, precise weights and accurate colouring. We also help you to optimize the mechanical properties of your product by selecting the optimal material and any post-processing steps together. Many years of experience with a wide range of products have allowed us to continuously optimize our processes. This enables us to react flexibly to your wishes and to produce a large variety of articles. Our interdisciplinary team examines your molds and products in order to develop an optimal manufacturing process. This reduces waste and process costs, so we can offer you a fair price-performance ratio.

The metal stamping is the activity on which it was founded Adveco, so that our company boasts 50 years of experience in this area, creating internally diverse machining, as deburring, chamfering, countersinking, threading, assembly and possible packaging with customer's logo. With a constantly updated vehicle fleet to the needs and market changes, Adveco today has thirty eccentric presses with force from 50 to 600 tons, press brakes and shears CNC. In recent years, Adveco printed cold both standard pieces of design for the most diverse areas of application, including the main surely construction, plumbing, automotive, home appliances, lighting and objects of all kinds. Around the shearing process is carried out in compliance with the UNI ENI ISO 9001, ensuring maximum customer satisfaction, both for the high quality of particular products, which for speed and flexibility in production.For this reason, Adveco is able to produce both small and large batches, depending on the specific needs of the customer. The extensive experience in the cutting of metals, ferrous and non, also allowed us to forge a long-term collaboration with serious and reliable partner, bringing to propose a complete service, from design and construction of molds to surface treatments such as hardening, welding, painting and galvanizing.

Ideas made of plastic — this motto characterizes the demands and performance of our company. Tolges products are therefore used worldwide in many areas of everyday life, trade and economy. For over 40 years, our 75 qualified employees have been providing creative plastic ideas, individual productions and comprehensive solutions — everything from a single source on request. The company's own development/design, toolmaking, injection molding and assembly departments guarantee customers consistently high quality. In our production, we process almost all common and known thermoplastics and elastomers. These include ABS, EVA, PA, PC, PE, PEI, PMMA, POM, PP, PS, PVC, TPE and TPU. Thanks to our work for a wide variety of industrial sectors, we have considerable know-how in the processing of technical plastics. In the 2-component process, a hard component (plastic) is combined with a soft component (elastomer) to form a composite part in a joint synchronous process. This process allows the physical properties (strength, weight, etc.) of materials to be optimally combined. > Machine clamping force: from 25 t to 1,000 t > Spray weight: from 1 g to 8,000 g > Part dimensions: up to 1,300 mm (W) x 2,000 mm (L) > 2-K syringes with plasma aftertreatment > Assembly of components > Pad printing, screen printing, embossing

Our expertise at the service of customers 30 years experience The mkt metal and plastic GmbH is an innovative, customer-oriented company with a focus on the production of metal-plastic composites and demanding thermoplastic plastic parts and their construction. The foundation stone was laid in 1996 by a successful MBO with 30 years of experience in the tooling and plastic molding. We offer our customers solutions for the thermoplastic injection molding, simple parts to complex assemblies with overmolding of metal and parts in 2-shot molding components. We control quantities from prototype to series production parts with million parts per year. We develop solutions for the most varied of tasks in the automotive, office furniture, aerospace, medical and automation industries. Competent troubleshooting Discuss with us your problem. Through competent partner in the fields of design, tooling and plastic injection we offer optimal technical and economic solutions. We implement the solution found by the design to mass production. Flexible and customer-oriented We are always there for you and advise you. We respond individually to their needs and show you tailored solutions with all our expertise.

We specialize in Additive Manufacturing - particularly DMLS and precision CNC processes. From design conceptualization to AM, modeling, prototyping, serial production, and post-processing, we offer comprehensive Engineering and Manufacturing solutions tailored to drive your success.

Perform3D — your partner for blow molding and hollow plastic bodies Perform3D is your experienced specialist for the production of blow molds, prototypes, devices as well as individual and series parts. With cutting-edge technology and over 550 m² of production space, we offer fast, flexible solutions — from tool manufacturing to finished plastic blown products. Highest quality, punctuality and cost-effective production are our top priorities. Let us achieve your production goals together!

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products. In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

Welcome to asm! As a certified specialist company, we provide you with precision turned, milled and eroded parts with over 20 years of experience. We specialize in the CNC processing of complex high-tech components and rely on high-quality materials and the best quality of implementation. Our qualified employees support you with your project and work closely with you so that we can perfectly implement your individual ideas and requirements. With ultra-modern machines combined with our many years of experience, we focus on effectiveness and flexibility. Thanks to our 100% control and an “all-in-one service”, we offer the highest quality and safety in the long term and take full responsibility for the implementation of your project. Our products are guaranteed to be free from steel contamination! We rely on a high level of vertical integration and good cooperation partners in order to be able to offer you a wide range of services. With us, you not only receive high-quality CNC processing, but also active support with your project. Get in touch with us now and see for yourself.

We are a family company with over 35 years of experience and know-how in manufacturing of turned and milled parts.

COMPETENCE We have been producing sophisticated technical plastic parts for more than 50 years. We are a competent partner in product development and are used to working in a solution-oriented manner. Thanks to our vast experience, we have been able to apply our know-how in a wide variety of industries. Our customers expect tailor-made solutions, flexibility, continuity and reliability from us. TOOL MAKING During the development of new tools, our technicians, plastics technologists and toolmakers are in constant dialogue with customers in order to achieve optimal results. In this way, customers are informed of the current project status at any point in the development process. For us, quality and reliability start early in the consultation phase and continue through all work steps. ADVICE You would like to take advantage of a personal consultation with one of our specialists. If you need answers about the different production processes, material specifications, 2K or 3K injection molding or you need a functional prototype as quickly as possible, then you've come to the right place. We will be happy to advise you competently in the design of the tools and show you the advantages of the different variants.

We are your supplier for high-quality injection molding tools, plastic and metal components, from development to production. We develop and manufacture individual vehicles for you exactly according to your requirements. We offer you certified special protection vehicles and solutions that protect lives. Companies from the automotive sector, industry, medical technology and other sectors rely on our expertise. Our special vehicle construction meets every wish and requirement. Emergency personnel, NGOs and high-ranking personalities rely on our certified special protection solutions. With over 1,000 employees at seven locations across Europe and powerful machinery, we are ready for any task — and are sure to offer you the best solution.

Precision in every injection-molded part Welcome to L&S Technische Kunststoffteile GmbH — As an independent and family-run company, we have been producing technical plastic parts using the injection molding process since 1994. As a reliable partner, we support our customers in all matters relating to the development and production of high-precision plastic parts. Our range of services includes prototype and small series production, as well as fully automated series production of plastic parts. Our products are used in a wide variety of industries and areas of application, from automotive to industry to medical technology. In addition, we offer our in-house tool and mold manufacturing customers many years of expertise in the design and manufacture of all types of injection molding tools. In doing so, we focus our actions entirely on the needs of our customers and always strive for a reliable and long-term partnership. In doing so, we offer our customers added value in terms of quality, flexibility and efficiency through our comprehensive range of services relating to plastics technology. Learn more about us and how we help shape our clients' success stories through long-term and reliable partnerships.

Mold making Diemer Particle foam tools, deep-drawing tools, fiber casting tools, contract machining We mainly produce tools for particle foam processing, e.g. for EPP, EPS, Piocelan, eTPU. Other mainstays of our company are the manufacture of deep-drawing, fiber-casting and pressing tools of various designs. We offer contract machining on our CNC milling machines. In the 3-axis area, our machining areas are up to 2200x1150x700 mm and in the 5-axis area we can machine up to an interference circle diameter of 950mm. All processing is possible fully simultaneously. Thanks to our experienced team, we can guarantee the highest quality with fast delivery times and an affordable price. We offer you the entire range of services from CAD design to machining, surface processing such as lasering, etching or teflon coating, the assembly of your tools, changes and repairs to existing and third-party tools, as well as personal on-site support. Contact us.

We are geared towards plant, fixture and special machine construction - from the drawing part to the PLC-controlled robot system - and offer first-class service over the entire product life cycle. We also implement time-critical projects flexibly and reliably and contribute our extensive know-how to planning and implementation. From the first feasibility studies to wear part management for ongoing operations - everything from a single source. In our company, a competent and experienced team focuses on innovation, quality and continuity. We realize your ideas • Project planning and engineering • construction • Special mechanical engineering • Commissioning and training • Maintenance and repair work Our customers include international corporations as well as small and medium-sized companies from various industries such as the automotive and supplier industries, light bulb manufacturers, cosmetics and food industries and many more.