Manufacture and installation of tool magazines, turrets and other assemblies. From raw material sourcing through to assembly of components and manufacturing small and medium series. Mechanical processing, such as sawing, milling, drilling, turning, surface and profile grinding and cylindrical grinding with the highest precision (up to 0,003 mm). THE GEMAG For more than 50 years, the GEMAG Gelenauer Maschinenbau AG presents itself as an innovative and reliable partner in the field of mechanical engineering. The 2002 newly built in 2007 and extended operating facility provides for the approximately 100 employees of the company optimum conditions to implement diverse and demanding customer requirements. In the period from 2002 to 2009, more than 15 million Euros have been invested in the site, especially in ultra-modern, productive and accurate machinery and equipment. Especially in the areas of * Production and installation of mechanical engineering components and assemblies * Large Mechanical parts * Precision Manufacturing * Small and medium batch production

Our main program is production of Al sand and permanent mould castings in a total weight of 850tons per year destined for mechanical, textile, building and automobile industry, art casting and equipment for towns and municipalities. Our mechanical work-shop provides full cutting of aluminium casts and other materials (brass, steel, plactic and others). History of our company Tradition of Kovolit Česká dates back to 1936 when we started with building and production of drink fittings and bell-casting. Bell-casting had been done by Mr Manousek by 1953. Afer that this production was moved to Zbraslav. The production of drink fittings was finished in 1990. Present situation Nowadays Kovolit Česká specializes in production of aluminium sandcasting and moulds. Our 50 years´ experience in this field represents profound knowledge that can be seen in quality and accuracy of our deliveries. Total annual production is roughly 900tons of Al moulds per year. The main customers are engineering, textile and construction companies. The weight of aluminium casts are from 0.10kg 400kg. Our foundry offers models, moulds, cores and a process of sand drying. Due to customers´ wishes we also provide heat treatment, hardening, x-ray of aluminium moulds and testing of mechanical qualities of materials. A mechanical work-shop, that provides cast machining, milling, turning, grinding, drilling, varnishing and production of mechanical parts from all kinds of materials (Al, Ms, steel, stainless steel, plactic and others), is a part of our company. Kovolit Česká employs about 130 workers. Why to choose "KOVOLIT ČESKÁ" * Providing the quality by means of audit according to customer´s wishes * Historical experience * High quality * Precise observance of the supplies * High level of Know- how * Efficient order plan with uniform distribution * 60% export to Germany, France, Austria, Italy, Slovakia * Settled and stabilized property relations Coating Coating is provided by: * blasting (blast medium is corundum, balotin, sand, rustless crushed material) * balling-tumbling * Varnishing – komaxit * Machine cutting * Scurfing * Polishing * Special final filing * Grinding * Welding and preservation (shielding gas) Special offer * Manufacturing of aluminium garden furniture, decorative columns, traffic signs and their fixation – fixing lugs * Aluminium welding, blasting, tumbling, cutting, grinding, polishing, ultrasonic cleaning (450x300x330), powder and wet varnishing * Balancing – TWINGO-I static and dynamic balancing in the highest quality class (up to ø1000mm/60kg) * Co-ordinate measuring machine TRIMOS VECTRA 600 Touch * 3D CAD/CAM software Solid Works

Weinmann is primarily for quality in small and medium series. But Weinmann is also diversity. Diversity in the processing of different materials such as stainless alloys, copper, aluminum, titanium or plastic. Diversity in the ways of module assembly. Diversity in the processing options and parts Dimensions: * Large diameter up to 250 mm * Great lengths to 1000 mm * Complex geometries * Micro turned parts * Revolver and rotational parts * Frästeile A diversity that makes you much easier. Especially when * Need many different parts * Change your parts often Block * all part families * Need "outliers" or special products.

Meislitzer Präzisionstechnik mainly produces customer-specific single components as well as prototypes and small batches for existing customers from a variety of industries including machinery and plant engineering, automotive, electronics, semiconductor, energy and medicine. Our employees are highly experienced in working with a complete range of specialized materials such as tool steels, carbides, synthetic materials and ceramics and have mastered many quite tricky manufacturing challenges so far. The combination of accuracy, speed in response, flexibility and straightforward approach has been our company’s strategy for success from the very beginning. For this reason we are in the position to supply our customer’s development divisions with machine parts, spares and prototypes within a short time. We guarantee delivery of premium and custom-made products in the shortest possible time. Our customers from various economy sectors are ensured fast and competent Service.

Werkzeugtechnik Niederstetten GmbH & Co KG sees itself as a reliable full-service supplier in the area of precision parts and forming technology. As a company of the international Würth Group, we are already a competent partner for well-known industrial companies in Germany and abroad from a wide variety of industries. From advice to simulation & design to the tool ready for series production - with us you get everything from a single source! We also manufacture precision parts in single and small series production based on 3D data sets and according to your individual wishes. In addition to the well-known production processes such as CNC turning and grinding, 5-axis simultaneous and HSC milling as well as spark erosion, we at WTN rely on new, innovative technologies such as "Precise Electrochemical Metalworking", or PECM for short. At WTN, we not only have all the technical requirements to process the entire range of materials from soft to hard. With our 100 employees, you will primarily come across concentrated know-how for the satisfactory implementation of your projects.

SWS offers an extensive programme with the production of tension tongs, tension tools and special devices. According to customers illustrations According to customers requirements According to (CAD) constructions We dominate all production processes including the necessary warm-treatment.

Strengths and unique features of the UMT Our focus is in the production of complex and high-precision individual parts and small series for machine building. We manufacture and install assemblies to the finished machine including commissioning and function test. And that since 1995. Our production range we include any kind of turning, milling, grinding, drilling, painting, and assembling. Strengths in staff • We work exclusively with trained and experienced personnel. Thus we are able to build completely different machines including production. • We provide our clients with individual advice to manufacturing and installation, as well as new developments of machines and assemblies. • Through this technical assistance, the customer gets the chance to reduce its costs of production and to develop production-ready components. • Due to shallow levels of management, clearly defined tasks with short decision paths, open exchange of information between and within the areas a fast and flexible adaptation to changing requirements is possible. • Our ams.erp system supports and ensures the transparency of the offer process on the commercial management, from production to installation. • We have a perpetual license for giving our employees. • This guarantee is for customer satisfaction, flexibility, competence and reliability. Technical strengths • We ask ourselves individually to our customers, because we can enable much our know-how and machinery. Ranging from transfer units, machining centers, tool grinding, induction hardening machines, electron beam welding machines, special purpose grinding machines for the aircraft to complex devices for the automotive supplier industry. • Consulting, planning, purchasing, manufacturing, assembly, electrical and service - all from one source. • These are our modern manufacturing. Through the consistent expansion of the production machinery machining centers we are very flexible in processing.We produce cubic components up to a size of 1.80 mx 1.80 mx 1.8 m with the highest accuracy (5 μ). • All machining centers have tool storage with 240-350 tools, palettes, and swivel heads with 5-side machining. In this way we minimize the set up time and can go unmanned shifts. • With our modern universal grinding machines, we can thread, out of round, grind inside and waves up to a size of 200 mm dia x 1400 mm with an accuracy of 1 μ. • With our modern "pick-up" machine, we can carry out the complete turning and milling of turned parts cost. And this up to a diameter of 400 mm. • We assume 3D data into a modern programming system of Open Mind. This error can be prevented and fast programming of the machine is guaranteed. • All parts that we deal with are measured in our quality assurance with modern Zeiss measuring machines and creates audit logs. • All this is a guarantee for quality and precision.

Deharde-Maschinenbau H. Hoffmann GmbH is a soundly established company in the metalworking industry with a workforce of over 150. The production of jigs and fixtures - as well as the construction of sophisticated high speed and low speed wind tunnel models - represents our particular fields of specialisation as contract manufacturers. Our scope of activities is traditionally very broad and also includes the construction of special-purpose machines and moulds.

We have for parts as well as tool and fixture "tool and machine engineering GmbH & Co. KG Cosmici" founded the company and spun off this area from the ProAss GmbH. We also have certified the Cosmici tool and machine engineering GmbH & Co. KG in accordance with DIN EN ISO 9001:2008! 30 years of competence in - purchasing, production and installation in tool and machine! And new - Laser marking! Your complete supplier of tool and plant, drawing parts and cast iron. We bring our experience and knowledge to your projects. 2,000 employees in over 70 partner companies provide us with advice and practical help. We set ourselves high goals, take on any challenge and find optimal solutions. Take us through the latest technology, sophisticated Produtkionsverfahren and modern machinery. Your ADVANTAGES: SIMPLE - A point of contact for comprehensive and flexible care MONEY SAVING - lower costs by scattering or bundling SAFE - Reliable by quality control and modern technology SAVE TIME - With high delivery speed and outsourcing Challenge us!

WHAT WE CAN standard solutions? Not with us! We accept every challenge to significantly reduce residual curvature - e.g. with our straightening presses including torsion straightening system. • Directivity: from 20 kN to 10,000 kN • Twisting moment: up to 25,000 Nm • Wobble rivets: up to 40 kN • Workpiece lengths: from 300 to 10,000 mm • Directional accuracy: ~0.01 mm/m PERFECTION ... that's payroll at RICHTMANUFAKTUR. With modern machinery and an all-round service that leaves nothing to be desired: from advice on the implementation of straightening tasks, to final inspection and shipping. — Especially when it matters. TRUST ... you can rely on our leading expertise in straightening or forming: • Standard profiles and profiles with special shapes • rack and extruded profiles • Laser and machined parts • Bar and flat materials • Standard parts and semi-finished products • Special Defense Profiles • Round and turned parts • Tool base plates WHY YOU SHOULD TALK TO US Because we can - We fix both newly manufactured and in-use deformed workpieces. If outsourcing is the more economical solution for you, we are at your side as a powerful partner for payroll adjustment.

Dear Sirs; Our company is in the market since 24 years. We target our selves to create more competitive solutions for our customers. We will be very pleasure to present you our experience with LCC (Low Cost Country) advantages in Turkey for your product range that you could prefer to subcontract for your future benefits. We will look forward to receive your quotations to start our mutual partnership.Please do not hesitate to contact us For any affair. Best Regards Eyup Yildiz

ZSO sees itself as a competent supplier and service provider in the metal Zerpanung (turning, milling, grinding) and component assembly. In the area of contract manufacturing (turning, milling, grinding and surface treatment), we offer our services from small series to medium runs with great variety. Here, the annual volumes of 5,000 St. can (with high complexity, Dreh-/Frästeil 50 min processing time) vary up to 1.4 million St. (simple turned part, about 1.5 min. Processing time). The possible workpiece sizes reach the maximum diameter of 400 mm when turning. In radial grooves on the outer contour may occur reduction of the workpiece diameter. During milling, we can work with our machining centers cube sizes up to 1000 mm. We also perform desired by impermeability tests also. The company ZSO GmbH is a company of senata GmbH (www.senata.de), an owner-managed medium-sized companies with a high share of equity.

Manufacturer for moulds an dies in single or multi componeten systems

We are a medium sized company with about 60 employees near Ingolstadt. The company Schermer has now been around 32 years. Our production focus lies in the production of precision parts (accuracy to 0.002 mm) for mechanical engineering, the aerospace industry and the automotive industry. In addition to high-precision individual parts and small series, we also manufacture complete equipment and tools. Our machining depth ranges from conventional turning / milling about the CNC-Drehen/CNC-Fräsen to grinding (flat, indoor and outdoor round, coordinates, etc.), wire EDM and waterjet cutting. Here, our range of materials from steel and stainless steel ranges over the non-ferrous metals, brass, red brass and copper up to the light metal such as aluminum and titanium. As a partner in our small group, we have a separate material including service providers, our sister company MVI (www.mvi-metall.de), which ensure rapid deployment of most raw materials and semi-finished products.Over a network, which we, together with our suppliers, we can offer our customers a wide range of heat treatment processes and surface coatings obtained from a single source. So we are as a supplier specializing in the most common heat treatment methods such as case hardening, nitriding and vacuum hardening. Our program offers among other things a complete machining in the field of manufacturing parts by: lathe parts, pistons, bushings, washers, rings, valve seat, coil, cone, spool, pipes, sleeves, shafts, axles, hubs, spool, spring plate, pin, roller, roller , bolts, screws nozzles, grinding mandrels, sizing, spindle, aperture, mandrels, lid, insert flange. In addition to our machining capabilities, we offer our customers even complete assemblies such as measuring devices, test equipment, gauges and mounting devices.

We are an innovative and powerful companies in the metalworking industry, which successfully presented by flexibility, high quality and manufacturing standards for several years on the market. With an efficient and equipped with CNC technology, modern machinery, we manufacture items, sample parts, small and medium series in all standard and special materials. With over 35 years of experience in mechanical engineering and metal working, we are now even to realize highly complex manufacturing tasks is able to provide our customers requirements to meet.

Sales agency working together with highly qualified producers from Europe and Asia in following technologies: - zinc/alu/magnesium diecasting - investment casting - cast iron/spheroidal cast iron - sand casting /permanent mold casting - alu extrusion - alu/steel forging - sheet metal processing /stamping - injection molding - turning + milling - sintering + MIM

Experience and Innovation More than 30 years of experience in the field of metal processing form the basis for our daily business. National as well as global industrial customers from various industries, we count among our customers. We manufacture and procure almost everything is manufactured from metallic materials or plastics. We support the mission of the advice on the drawing (CAD / CAM) to the finished product. Latest technologies, advanced manufacturing equipment and our courage to innovate guarantee the highest quality.

Our company established in 1983 as a small workshop, was corporated in 2003 and got the name of KAYALAR YAY SAN. TİC. LTD. ŞTİ. With 37 years of experience and perseverance, it has become a respected company of Turkish industry not only in terms of production but also in quality of production with international technology, expert staff and wide machine park.