Family business Franc Pauman s.p. offers you services with CNC grinding machines. We construct and produce small and medium stamping, cutting and casting tools with our partners. A lot of work is done by CNC lathemachines, CNC millingmachines and CNC grinding machines.

Stands for quality, precision and custom products and considers itself a service provider. From the initial contact through to the finished product We are your competent contact for: • Advice • Formulation of the concept • Design • Manufacture of the components ...sawing, turning, milling, hardening, heat treatment, surface and circular ...grinding, co-ordinate grinding, hard turning, 5-axis milling, HSC milling, ...eroding, laser cutting, water jet cutting, verified welding, surface treatment ...(bronzing, anodising, hard-coding, silver-plating, gold-plating, chemically ...nickel-plating) • Polishing, coating • Provision of outsourced parts: ...Electrical parts, standard parts, guide components, pneumatic parts and ...hydraulic parts • Installation work • Adjustment works • Test runs • Delivery with company vehicle or freight company and courier services.

Deharde-Maschinenbau H. Hoffmann GmbH is a soundly established company in the metalworking industry with a workforce of over 150. The production of jigs and fixtures - as well as the construction of sophisticated high speed and low speed wind tunnel models - represents our particular fields of specialisation as contract manufacturers. Our scope of activities is traditionally very broad and also includes the construction of special-purpose machines and moulds.

Malkoč tehnika doo was founded on 1986. We offer turning, milling, welding, grinding services. We are equipped with classic as well as CNC machines. Our company reinvests large part of its profits in procurement of new machinery, education of its employees and improvement of technological solutions.

Dear Sirs; Our company is in the market since 24 years. We target our selves to create more competitive solutions for our customers. We will be very pleasure to present you our experience with LCC (Low Cost Country) advantages in Turkey for your product range that you could prefer to subcontract for your future benefits. We will look forward to receive your quotations to start our mutual partnership.Please do not hesitate to contact us For any affair. Best Regards Eyup Yildiz

The Urben and Kyburz AG is a company of machining, mechanical industry. As a manufacturer of high precision components in the medium-and large-series range, the company supplies an internationally very demanding clientele. With 120 employees and a modern machine, we offer a complete, cutting, machining in medium-and large-series range. What procedures are offered? CNC turning, precision turning, hard turning, CNC milling and drilling, grinding (outside, inside, centerless, honing, polishing, lapping, center, trowallisieren), brushes and spaces. For heat treatments, we work with qualified partners. Which part dimensions we? Everything what you still need neither a magnifying glass, a crane! Expressed in figures, this means: Rotational parts: 10 mm - 250 mm in diameter and a maximum length of 600mm. Cubic parts: up to max. 200 x 250 x 300 mm What precision do we offer? Highest precision is and has always been the great strength of Urben + Kyburz AG. With highly motivated and dedicated employees and the appropriate resources, we produce daily precision parts in the micro-region of all common materials.

ZSO sees itself as a competent supplier and service provider in the metal Zerpanung (turning, milling, grinding) and component assembly. In the area of contract manufacturing (turning, milling, grinding and surface treatment), we offer our services from small series to medium runs with great variety. Here, the annual volumes of 5,000 St. can (with high complexity, Dreh-/Frästeil 50 min processing time) vary up to 1.4 million St. (simple turned part, about 1.5 min. Processing time). The possible workpiece sizes reach the maximum diameter of 400 mm when turning. In radial grooves on the outer contour may occur reduction of the workpiece diameter. During milling, we can work with our machining centers cube sizes up to 1000 mm. We also perform desired by impermeability tests also. The company ZSO GmbH is a company of senata GmbH (www.senata.de), an owner-managed medium-sized companies with a high share of equity.

At Lugal Teknik, we embrace the principle of providing reliable, innovative, and high-quality solutions to our customers. In every area we serve, we strive to maintain and continuously improve quality in: 🔧 Machinery spare parts manufacturing, 📐 Reverse engineering and design, 📦 Technical and in-direct procurement. The cornerstones of our quality policy are: Maintaining the highest level of customer satisfaction, Ensuring compliance with legal and sectoral requirements, Making a difference with advanced engineering solutions, Prioritizing efficiency, safety, and sustainability in all our processes.

We are a medium sized company and have specialized in the areas of tool and mold as well as special purpose machines, jigs and fixtures. You will find our Operational 25 km from Hannover, Neustadt a Rbg .. in the district of Basse. There you will find our experienced team of 65 employees. We offer the following services: Tool and Mould Contract manufacturing in the areas of CNC milling (3/5 axis) and turning  Product Development  Prototyping  2D/3D - Construction  Tools and forms  injection molds  Punching tools and devices  Individual production according to customer specification  Special purpose machines  machinery and equipment including construction  Installation and commissioning on site

Manufacturer for moulds an dies in single or multi componeten systems

Die heutige DEURINGER GmbH wurde im Jahre 1989 vom Firmeninhaber Wolfgang Deuringer, als Einzelfirma gegründet. Erstprodukt: CNC-Fertigteile nach Kundenzeichnungen 1992: Beziehen des Neubaus in der Adolph-Kolping-Straße 2 1996: Erweiterungsbau - Materiallager 1997: Umbenennung in DEURINGER GmbH 1998: Erweiterungsbau und Außenanlagen 2001: Erweiterungsbau Ausbildungswerkstätte 2003: Erweiterungsbau Bürogebäude 2004: Neubau Kantine/Schulungsraum 2005: Erweiterung der Fertigung (Drahterodieren) 2007: Neubau Lagerhalle Unsere Fertigung erstreckt sich auf über 1000qm, auf der mit modernsten Maschinen hochwertige Produkte entstehen. Wir fräsen, drehen, bohren oder schleifen Einzelteile, Serienteile und komplette Baugruppen für: - Transporteinheiten - Dämpfereinheiten im Bereich Auto- und Motorsport - Elektrotechnik z.B. kpl. Lichtleiter-Verbindungen, Kühlkörper, Gehäuse, Aufbauplatten - Logistiksysteme der Zuführereinheiten, Transportsysteme - Papiermaschinen, Verpackungsmaschinen und Kartonagen - Strömungstechnik z.B. Ventile für Sonderpumpen, Verteilungssysteme für Luft und Öl, Düsen - Recyclinganlagen z.B. Kameragehäuse, Sotiereinrichtungen - chemische Anlagen, über- und Unterdruck-Einrichtungen, Verschlüsse an Gehäusen Unser Unternehmen hat sich heute als Lohnfertiger mit folgenden Fertigungsarten etabliert: CNC - Drehen, Einzel- und Serienteile CNC - Fräsen, Einzel- und Serienteile Flachschleifen und Drahterodieren Innenrund-und Außenrundschleifen Fertigung von Systembaugruppen auch mit Elektrik Härten

Our company established in 1983 as a small workshop, was corporated in 2003 and got the name of KAYALAR YAY SAN. TİC. LTD. ŞTİ. With 37 years of experience and perseverance, it has become a respected company of Turkish industry not only in terms of production but also in quality of production with international technology, expert staff and wide machine park.

We are an innovative and powerful companies in the metalworking industry, which successfully presented by flexibility, high quality and manufacturing standards for several years on the market. With an efficient and equipped with CNC technology, modern machinery, we manufacture items, sample parts, small and medium series in all standard and special materials. With over 35 years of experience in mechanical engineering and metal working, we are now even to realize highly complex manufacturing tasks is able to provide our customers requirements to meet.

Since 1925 we have specialized in metal machining and in the production of precision mechanical components, seeking innovative and increasingly effective technical solutions. Our production chain allows us to offer the best quality product at the most competitive price. Each project is unique and requires a tailored approach. For this reason we do not set ourselves technical limits: our strength lies in studying and implementing the technologies necessary to create quality products.

For over 40 years we produce for third parties components for machinery, ranging from the bevel gear used for agricultural machinery, industrial vehicles and cars, to large gears used in harvesters, cutters and harrows. We also manufacture special gears for sump machines and ground gears for cars, all through an advanced production system that allows us to know in real time the progress of the production cycle. We also take care of the realization of gears to customers' drawing, a service that responds to the increasingly demanding requirements out of the market standard. To ensure a high quality product, during all the phase of machining subject the material to a rigid and constant control by means of the product verification techniques defined for individual work areas. A guarantee of quality attested by the importance of established customers over the years, among which include trademarks of international importance. We always paid particular attention to the updating of our operating structure, coming to today to have an integrated apparatus, flexible and extremely competitive as regards the quality of the product and processing times.

We are experts in developing and constructing complex machines and systems. This also brings many advantages in contract manufacturing. Thanks to our large CNC machines and our manufacturing know-how, we offer our customers first-class metal processing according to individual specifications. The production documents and dimensional drawings are provided by our customers or designed in our own design office.

Firma "MPR" Petrović Mito has been specialized for production of various mechanical elements since 1983. We have been in the group of main suppliers for thermal power plants for over 20 years.

Production of CNC turning, milling and grinding work, complete assemblies, tool holders for CNC machines, Technologies: high-speed form grinding, milling, 5-sided machining, turning main and counter spindle with driven tools, DNC programming station