In the Components division high-precision components, among others, for manufacturers of wind turbines are manufactured. Customers benefit from over 140 years of know-how of DMG MORI Group in mechanical engineering. The Components division can refer to many years of experience and numerous references from all over the world. The outstanding quality and high reliability of Components is appreciated by customers in industries such as machinery and special machine design, innovative energy industry or the construction machinery industry.

ALUMETALL CZ s.r.o. - Aluminium Alloy Casting Foundry - ISO 9001: 2008 and ISO 14001: 2004 certified company. Customers highly appreciate: 1. Ensuring of complete technical development and 3D computer product designing in cooperation with the customer. 2. The construction and manufacture of foundry tools, its maintenance using non-abrasive dry ice blasting. This kind of blasting does not harm the shapes and surfaces of moulds thus considerably extending their service life. 3. Excellent products quality. 4. Short delivery times. 5. Helpfulness and speed communication. Production programme: components of hydraulic pumps, fittings, the high voltage transmission systems, pneumatic tools, engines, looms, fire extinguishers and other products in accordance with customer requirements. General parametres of the castings: weight 0.1 up to 30 kg/pc, minimum wall thickness from 4 mm. Material: Aluminium alloys according to standard EN 1706: AlSi12, AlSi12Cu, AlSi10MgMn, AlSi10CuMn, AlSi9Cu3, AlSi7Mg0.3 and the other. Production Technology: 1. Gravity casting into steel moulds. 2. Low pressure casting into steel moulds. 3. Sand casting. Production of prototypes, small and medium-sized series. If needed there are used sand cores in above mentioned technologies. Additional manufacturing processes: 1. Heat treatment - T6 2. Shot blasting 3. CNC machining 4. Wet and powder coating 5. Anodizing 6. Galvanizing 7. Assemble of the final product On-site equipment for quality control of castings: 1. Stationary X-ray unit PHILIPS for non-destructive testing internal quality of castings and completeness assembled assemblies. Commonly used in the sampling and mass production castings. 2. Spectral analyser SPECTROMAXx - chemical composition of supplied castings 3. Hardness tester (HB). 4. VIC Helium leak detector MS50 - Leakage test products against the flow of helium vacuum, according to EN 1779: 1999. The test is used for qualitatively very demanding castings. Element helium as control medium due to its very small-sized molecules guarantees 100% confidence compared to tests using air. Destructive and dimensional tests are provided in cooperation with accredited laboratories. Experts at Turning Your Dreams into Reality

We offer perfect service for small and medium-sized companies. We offer unbeatable service in the industry. Our goal is perfect results and the satisfaction of our customers always has the highest priority. We are proud of that. We advise you in the procurement of complex or technically demanding components. Thanks to our experience, we can quickly and easily develop measures and implement them together with you. Do you lack capacities in purchasing or are your employees involved in special projects? Just ask us! - We are here for you! Use our know-how, our global network and our experience in terms of technology, production and supplier selection.

The NRU GmbH was founded in 1992 as NRU precision technology GbR by the three partners Dr. Jürgen Jahn, Dr. Ludwig Kant and Dr. Hubert Zeidler. In 1999 2007, the company name, the company name was changed to Precision Technology GmbH NRU and renamed NRU GmbH. The objective at its foundation was, with new developments in the field of rapid prototyping, such as stereolithography to combine classical manufacturing methods such as casting, and so to allow effective production of investment castings in small quantities. Hence the three current main business areas have developed: precision casting - Rapid Prototyping - plastic vacuum casting. Our first office is many of our customers as a "kindergarten" - known - a former daycare. Since the end of 2006, our company is in a modern office and production building in the industrial area Neukirchen im Erzgebirge. The production area covers about 1,500 square meters. Our main clients we have in many different industries, such as automotive industry, electrical industry, medical, appliance. In 2013, the course for the new generation were asked in the company. So there since the end of 2013 from each founding family a successor. For the success and survival of our company is to ensure in the future.

THE SPECIALISTS FOR PROTOTYPE AND NICHE SERIES The BÖLLINGER GROUP with their subsidiaries HPP, KONCAST and INPECA specialise in manufacturing innovative prototypes and producing development parts, as well as niche and special series production runs – primarily in the field of drive Engineering, chassis frame and steering mechanism. Across all processes and technologies, our service begins with expert consultation for our customers and covers everything from engineering to the production and demand-driven provision of components for the automotive, aviation, machinery and plant construction industries.

952 WIZOL the AG was founded. The name refers to the founders, men Widmer and Zöllig, as well as the sector light metal. Since the establishment, we deal off Finally, with the casting of aluminum in all commercial alloys. WIZOL produces cast- parts in three different permanent mold casting method forth. (mold, low-pressure and pressure-casting). The molds are specially designed and hergestellt.Die in our own tool many years of experience make us specialists. Do our know-how to use. We are dedicated to economic with you and qualitatively equivalent to that required To seek solutions.

tooliss gmbh is a globally operating technology company specializing in engineered plastic parts and castings. As a highly specialized engineering service provider, the company uses value analyses to develop solutions for their customers that are optimized in terms of technology and cost-effectiveness.

Main activity : ………………………………..…Casting of aluminum castings *Low pressure casting of aluminium *Gravity Casting of Aluminum Start of business activity : …………….2003 Start of own production : ………….2010 Number of employees : ………………………6 Annual turnover 2022: ………………………1.000.000€

Scope of work: - gravity die casting 1000x800 - Low-pressure casting kokillengröße 1140x914 - Kokillenbau in the house - Hot swap Materials Processing: AL alloys according to DIN EN 1706

Our core competence is the production of castings and extrusions made of aluminum with high demands on quality and precision. Cutting-edge technology, designed according to the latest equipment and a motivated team of experienced specialists guarantee an effective and efficient processing of orders. We are certified to ISO 9001, environmental management standard ISO 14001 and automotive standard ISO / TS 16949.

We are a model making operation from the Hannover Region and took us to the production of prototypes and small series of specialized plastic and aluminum. We offer our customers: tool-oriented design products according to customer specifications for low pressure, injection molding, and Druckgußartikel CAD modeling with Catia V5 Model and prototype Rapid Prototyping Tool and mold for injection molding, - and deep drawing products Mold plastic (Cost-effective tools for small series) Small batch production (1 .. 5000 pcs) Plastics Processing Series production of injection molding and thermoforming articles CNC milling up to 950x650x250 mm wage Our customers include well-known companies from the electrical, medical, automotive supply industry and the engineering industry.

METAZ as located near Prague, about 20m south. The company exists since 1931 and has about 400 employees today. The company has two main sections - aluminum casting and steel casting and central areas, such as its own tool making, engineering, quality assurance, laboratories, etc. Serial processing is secured if necessary in cooperation with proven, experienced processing suppliers ALUMINUM FOUNDRY has annual capacity of about 1600 - 2000 tons of aluminum castings.Low-pressure casting is the dominant technology, classical gravity die casting is with us but still welcome. For smaller cast shows and for special purposes (solid parts) METAZ also has a sand casting area with machine frame shapes (approx 600x1000mm) in Ritter machines. Taylor made licensed technology of precise casting in plaster is used for production of the Turbo wheels Röhlinge in large series. Aluminum range has ISO 9001:2000 certification and ISO TS 16949:2002 Our customers are mainly from the automotive industry (different carrier, carrier arms, housing, cover, adapter, pump housing, etc), electrical industry (cans, lids, aluminum box, etc), mechanical engineering (motor bracket, carrier, aluminum spindle, belt cover, etc) from the telecommunications sector (antenna technology - holder, carrier, etc) Kompressorenbau (connecting rods, etc) etc STEEL FOUNDRY has annual capacity is only about 2000-2500 tons of steel castings and oriented

Cevher, founded by Technical Teacher Hüseyin Özyavuz in 1955 soon became a school for the Turkish casting sector with a series of firsts in the area. For years in the leading position in aluminium casting pieces, our brand is today in the position of being a leading supplier for the leading OEM customers of the automotive industry with our low-pressure casting method. Production of the first wheel was carried out in Cevher Casting facilities in 1984. Following this, production continued in an alloy wheels factory established in an area of 30,000 square meters in the Izmir Aegean Free Zone in 2003. Today, Cevher has an annual wheel production capacity of two million alluminium alloy wheels of which more than 90% is exported manufactured in a facility of 44,000 square meters, of which nearly 22,000 square meters of which are covered. Cevher conducts projects with CAS, CAD, CAE, FEA and casting simulations for product design and development while using CAD/CAM and CNC technologies for mold design and production. Cevher has always prioritised high customer satisfaction and shapes its future targets in order to become a leading aluminium alloy wheel manufacturer by producing customer-focused solutions. In line with this, investments that will increase production capacity and to create greater employment opportunities are being made. The first step of the growth strategy was taken by beginning operations in a factory area of 34,000 square meters.

Our company Mazaka Endüstriyel Ürünler Sanayi Ticaret ve Teknoloji A.Ş. established in Ankara in 2004 and offers its customers intermediate products needed in several fields, particularly production technologies, control automation systems, medical, and home-office. Our company, which aims to provide solutions specific to the needs of the sectors, has take it as its mission to provide competitive advantage by increasing the efficiency of our customers' production processes, to have effective business models and to create added value. In addition to the supply and sales of world-leading brands, we also implement domestically produced high-tech products with our own R&D and production activities. In line with the demands that come with these, we make turnkey projects and also provide engineering services. Headquartered in Ivedik Organized Industrial Zone, Ankara, our company provides services as a warehouse and office in an indoor area of 1000 square meters. In addition to the head office, a branch was founded in 2018 in Ankara for production activities. Then, in 2020, another branch was joined to the Mazaka family within Ankara Teknopark in order to carry out R&D activities.

Towards the introduction of a new product, it is necessary that after the development of the concept prototypes are available to different testing and analysis. The RAPID PROTOTYPING PROCESS Applied in home Hagmann is the fast and accurate way to prepare for a draft design, models and functional parts. Convince yourself of our performance and give us a call. Our team is at your disposal. ... Was founded in March 1996, and has specialized in the production of technically sophisticated model and prototype plastic parts. Using the method of "rapid prototyping" and to distinctive knowhow of customers and confidence in us is growing steadily. Quality and reliability are the best proof for Hagmann prototypes.

Are the pronounced dynamics and flexibility of a medium-sized structure in combination with the advantages of an internationally established production CF Maier the opportunity to develop highly sophisticated products of consistently high quality and inexpensive to manufacture. CF Maier light casting GmbH & Co KG The plant produces aluminum castings high levels in medium batch sizes than sand casting, gravity die and low pressure die castings-. Main customer base is the drive technology. Light metal flared flanges for water, waste water management and the paper industry as a round-house products off the program. The light cast is zertzifiziert according to DIN EN ISO 9001.2 and VDA 6

h1> Business /h1> We are a development partner and manufacturer of cast products of light metal for the automobile industry. The economic strength of our company is to be the basis for expanding our market presence and to enhance our Innovation and competitiveness. As a growing international group of companies, we strive for the highest Customer satisfaction through value-oriented service and partnership with our customers and supplier partners. Our company-wide quality-lived, environmental and work-safety-oriented Management System strongly supports the fulfillment of our corporate responsibilities. Raw materials, energy and water we use to conserve resources sparingly. We continually improve the environmental impact of our production processes and workflows with the aim to reduce the waste and emissions. Each employee ensures the Compliance with applicable legal obligations for our company. Motivated and qualified employees are the foundation of our success and the driving force for continuous improvement of our processes. Information and training are prerequisites for economic and quality-and environment-conscious thinking and action. In our society, social and environmental responsibility, we are righteous, we have a world of work create, to which our employees can be proud of and that allowed them to personal development.

Year of establishment: 1954 Delivery: 129 425 t Sales: EUR 289 million Export: 86% Sales / Employees: 293,000 EUR Owner: ELES 80% (ELES is the Slovenian state-owned electricity producer) Employees: 988

Our company was founded in 1956 by Helmut branch. We currently employ 12 staff. The production program includes unique pieces, and small and medium-sized series from 0 to 250 kg cast aluminum. Our products are characterized by a very good surface quality and dimensional accuracy. The satisfaction of our customers in terms of quality and delivery reliability is our ultimate goal. At our facility we provide castings forth a particularly good surface and excellent dimensional stability.