The company was formed in 2001 out of the idea, CNC - programs for sale. It was first performed avocational industry. This idea was the foundation for the later name: KncP K = construction ncP = CNC - programs. It followed the decision, also yet to be made to the programs parts. In 2002, a used CNC was from private sources - milling machine purchased, the second CNC 2005 - milling followed. The customer base expanded steadily, the avocation supplanted the little free time almost entirely, so that in June 2008 it was clear the decision to full independence. In September 2008, the production profile was through the acquisition of a new CNC - lathe should be considerably extended (CTX 410). Since the order situation remained stable despite the crisis, a new CNC was established in March 2010 - milling machine purchased (DMC 750V with 4th axis). Other customers were added, bringing the changed requirements of the machinery again.In October 2011, a new high-speed CNC milling machine (microns) was added to the mold manufacturing. For the further expansion of the production spectrum, the second older machine could by a new 5 axis - CNC milling machine to be replaced (Hermle B300U). This project and the purchase of the factory building and the associated land was implemented in October 2012. We are constantly striving to expand our production profile and are happy to accept new responsibilities and challenges.

Regardless of whether it is a prototype, small or large series, thanks to our many years of experience in the field of machining, we always have a suitable solution for you

Keurhorst Metalworking was founded in 2015 by Michiel Keurhorst, an experienced metalworker, who has mastered the profession from practice after years of experience in the world of machining. As a company, we mainly focus on complex 3D milling, but whether it is workpieces of Steel, stainless steel, aluminum, titanium or plastic, we always aim for the best results and are satisfied with nothing less. Furthermore, we are pre-eminently the address when it comes to high-end fine mechanical parts for, among other things, injection molds. In order to achieve this, we have access to a beautiful Hermle milling machine, and a Bridgeport. Furthermore, we naturally work with the best (measuring) tools, in a fully air-conditioned workshop. In addition, we can sometimes offer something extra with our Radial drilling machine, and a 3D printer. We are a young and dynamic company that does not shy away from challenges and where perfection is of paramount importance. Need something that requires high accuracy? Look no further .. and work with Keurhorst Metalworking.

msf-Reichert GmbH from Bissingen an der Teck is a family-run master company specializing in the CNC production of high-quality 5-axis milled parts. We have many years of experience when it comes to CNC milling and work for customers – demanding companies in the automotive, mechanical engineering, mold making, fixture construction and medical technology sectors – in the region and throughout Germany.

Company „Vitalii & Son“ has been developing and producing stretch moulds for PET bottles and containers even since this technology first took off in 1988 in Bulgaria. With our many years of experience, we guarantee the optimum design and contruction of the blow moulds to give you the best possible bottle quality. We have detailed knowledge of all the different types of machines. Thanks to our own manufacturing technologies, and especially our high end generation machines, we achieve the shortest possible lead times. In our well-equipped blowing laboratory, a wide range of tests and inspections can be performed before the start of production. Leading bottle makers value our competence and make regular use of our services. We concentrate our knowledge on the classic decision, we refuse to make the quick-change mould because we deeply believe that the life of this type of the moulds are short. We never forget about people who install the moulds. Large Moulds Our know-how extends up to “containers” with a content of 5, 10, 12, litres and even 5 gallons in a wide variety of shapes. Our design department is familiar with the special features of these large containers and the possibilities of production on the various types of blowing machines. Comprehensive advice for such projects is available to you at any time. Hot-Fill Blow Moulds We have already produced a large number of steel moulds for the hot-fill technology. Through the development of own manufacturing technologies, we reach smooth surfaces. We cut the manufacturing costs for those moulds considerably and in the same time reduce the weight of the moulds.

How can we help you? That's our way to say we are here for you to serve you as customer. Lentink founded in 1958 has grown into one of the leading suppliers in the field of high tech sheet metal. Deep drawing, pressing with transfers and progressive tools are our daily business. We deliver on daily base to our customers and we have to take care for more than 10.000 articles around Europe. With or without powdercoating and as simple parts and assemblies. Quality and reliability are our daily goals with our people. With over 60 years of experience, we manufacture large and small products in small and large series for different markets, sectors and industries in Europe. Companies like Bosch, Vaillant, Brötje and Buderus have also find their way to our company. This is facilitated by a wide equipped machine park consisting of-the-art technologies as well as by the daily commitment of more than 125 enthousiastic technical specialists. Processing of steel parts with many features and Lentink would like to advise you about your products as well. If you want to know more about sheetsteel possibilities; please feel free to contact us. Ronald Pool tel: 0031-611780352 WWW.LENTINK.NL Tel: 0031-315382130

The company Basement mold manufacturing is a high quality operation, tool and supply company, we characterized the precision, reliability, and low cost manufacturing from. Reliability and speed extra special in the wire and sinker EDM but also "NEW" in CNC 2-3D / to 5Achsensimultan milling are our strengths. We are a top supplier for renowned customers. Injection molds, stamping and bending tools and their spare parts, precision parts As well as our own developed product: Clamping systems for wire EDM machines possible with very good Oualität, individual designs, affordable clamping systems for your needs.

HIGH PRECISION MANUFACTURING

We are a young, modern company in the CNC contract manufacturing sector. Our quality standards as well as our adherence to deadlines are the top priority of our company. This is the only way we can identify with every product and every service. That is why we have set up this homepage for you so that we can inform you even better about our services. The service-oriented customer care is an essential cornerstone of our successful corporate strategy. Fulfilling your wishes is our focus. Qualified employees provide friendly and expert advice. Our extensive range of services leaves nothing to be desired. Convince yourself of our range of services and our diverse range of services in the field of CNC contract manufacturing. Our products are characterized by the highest quality and the most modern manufacturing technology. Of course we offer you all this at a fair price. Every employee has special knowledge and many years of professional experience in the field of CNC contract manufacturing. These are reflected in our products. You as a customer benefit from this, now and in the future!

Our company was established in 1997, in the field of metal processing. Since then, it adopts a quality agreement that has successfully delivered hundreds of thousands of parts for testing. It has closely teamed up with the developing metal processing technologies and made the necessary investments. It has produced precision equipment such as engine parts, machine parts, molds and fixtures directly for many main industrial enterprises. Our main references are; -Iveco Motor Company (ITALY) -Toyota Factory (Türkiye) -AISIN A.Ş (Türkiye) -Basak Traktor A.Ş (Türkiye) -DEMİSAŞ (Türkiye) -Turk Traktor AS. (Türkiye)

We are a small family manufacturing company that has specialized in the realization of any claims or demands of our clients in the field of mechanical engineering. Our core business is Cnc milling and we can offer you milling range up to 1250x600x650.(5 machines) Production site is located in Samobor, CROATIA near capital Zagreb,2 km form highways A1,A3,A4. Offer: -Milling -Form milling -Engraver milling -Spark erosion wire cutting -Spark erosion and Etching -Injection moulding -Stamped and sheet metal formed parts

MAGXYARMET is a well-known European supplier of ready-machined castings, which find their application in various engineering branches. The company has been producing high value alloy steel products since its foundation in 1981 and is nowadays the leading Hungarian investment foundry. During the past decades the technology has been steadily improved and automated, the castings and components are produced mainly in small and medium sized series. MAGYARMET unites the accurate lost wax technology with a wide variety of materials: low-alloy steels, high-alloy steels (corrosion- and heat-resistant, dupley), war-resistant alloys, Nicke- and Cobalt-based alloys, bronze. Our technology enables the production of castings weighing between 0,050 and 45 kg. The products of MAGYARMET are used in pumps and valves, instrumentation, food stuff processing, general and chemical engineering, petrochemistry, filtration and packaging equipment, automotive industry and other vehicles, medical equipments, big engine production, process and general engineering, construction etc.The bigger part of our products, approximately 75%, is exported to Germany, Switzerland, Great Britain, Austria, Spain, France, Finland, Denmark, Sweden, Italy and the Netherlands. The continuous development and the aim to satisfy the demands of various markets led MAGYARMET to start rapid prototyping. This technology joins together the high-tech laser printing technology and the exceptional development of MAGYARMET during several decades in precision investment casting. Rapid prototyping based on 3D printing makes it possible for customers to get the required part machined and ready-to-assemble within two weeks. MAGYARMET offers full service and ready-to-assemble parts. Our machining shop currently has more than 20 CNC turning and milling machines, NC controlled key-seating machine and other conventional machines at service. For further information, please, visit our website: www.magyarmet.com

We are a stable, Austrian contract manufacturer and convince by our ability and our performance in the area of starting hole and wire erosion. Our customers in the global environment especially appreciate our flexibility, short lead times and our expertise in difficult jobs. 12 pcs water and wire EDM 3 pcs CNC-Hole EDM machines are disposal. Wire EDM small parts - Micro parts (thin wire processing) Wire cutting by oversized workpieces up to 500 mm height Konik 50 ° per side to height 500 mm Hole EDM of micro bores from Ø 0.25 mm Hole EDM oversized workpieces up to 500 mm height

Founded in 1999 as a milling service provider with a focus on "graphite electrodes", we now offer all classic manufacturing processes in tool and mold making, 3-axis and 5-axis milling, wire EDM with rotary axis, sink EDM, turning, especially hard turning. 3D coordinate measuring technology completes the offer. Our range of services includes the production of all shaping parts in injection molding, die casting, stamping, bending and embossing tools, the manufacture of individual and prototype parts, as well as tool repairs, including all the design and programming services required for this.

We are your contact for innovative product development and manufacturing in the field of mechanical engineering, metal processing and metal construction.

Development, prototypes & small series The Hintsteiner Group is a leading manufacturer of prototypes and small series made of plastic and fiber composite materials (carbon). Due to our many years of experience in the areas of automotive, motorsport, defense technology and industry, we can offer you comprehensive know-how and a high level of competence.

TOKOZ a.s. is Czech engineering company focused on building fittings, components for automotive industry and components for other industry areas. TOKOZ a.s. offers to customers completely services: - development - tool construction and manufacture - die casting of Al and Zn alloys - stamping (pressing) - assembling - surface finishing (powder painting, galvanization) - package, transport and after-sale customer servicing TOKOZ a.s. dispose of: - modern mechanical equipment - specialized staff - experience with supplies into automotive and building industry - favorable demographic position - quality certificates: ISO 9001:2008, ISO/TS 16949:2009, ISO 14001, ČSN OHSAS 18001 - certificate of solvent

Product Development / Construction Area Plastics Components / Assemblies / Medical / Vehicle / Building Technology Construction and construction of small series - and prototypes tools / jigs / gauges Patterning / production of thermoplastic components / injection molding Research and development on shape - memory drives / switching elements / sensors